All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Lin <thomas_lin@lecomputing.com>
To: rafael@kernel.org, lenb@kernel.org, hoan@os.amperecomputing.com,
	linusw@kernel.org, brgl@kernel.org,
	mika.westerberg@linux.intel.com,
	andriy.shevchenko@linux.intel.com, jsd@semihalf.com,
	andi.shyti@kernel.org, broonie@kernel.org
Cc: linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-gpio@vger.kernel.org, linux-i2c@vger.kernel.org,
	linux-spi@vger.kernel.org, lucas_hao@lecomputing.com,
	puntar_liu@lecomputing.com, jihua_tao@lecomputing.com,
	stan_xu@lecomputing.com, lumin_liu@lecomputing.com,
	notics_zhang@lecomputing.com, braden_zhang@lecomputing.com,
	harold_wu@lecomputing.com, will_zhang@lecomputing.com,
	aurora_jiang@lecomputing.com, ryen_lin@lecomputing.com,
	andy_jiang@lecomputing.com,
	Thomas Lin <thomas_lin@lecomputing.com>
Subject: [PATCH v2 2/3] spi: dw-mmio: Add ACPI ID LECA0002 for LECARC SoCs
Date: Fri, 15 May 2026 19:03:19 +0800	[thread overview]
Message-ID: <20260515110322.2883310-3-thomas_lin@lecomputing.com> (raw)
In-Reply-To: <20260515110322.2883310-1-thomas_lin@lecomputing.com>

Add ACPI ID "LECA0002" for LECARC SoCs. This ID requires a custom initialization function dw_spi_hssi_no_dma_init() that sets dws->dws.ip to DW_HSSI_ID.

Signed-off-by: Thomas Lin <thomas_lin@lecomputing.com>
---
 drivers/acpi/acpi_apd.c   | 7 +++++++
 drivers/spi/spi-dw-mmio.c | 7 ++++---
 2 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
index bed0791c17fc..4d5a51d30adc 100644
--- a/drivers/acpi/acpi_apd.c
+++ b/drivers/acpi/acpi_apd.c
@@ -181,6 +181,12 @@ static const struct apd_device_desc hip08_spi_desc = {
 	.setup = acpi_apd_setup,
 	.fixed_clk_rate = 250000000,
 };
+
+static const struct apd_device_desc leca_spi_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 400000000,
+};
+
 #endif /* CONFIG_ARM64 */
 
 #endif
@@ -251,6 +257,7 @@ static const struct acpi_device_id acpi_apd_device_ids[] = {
 	{ "HISI02A2", APD_ADDR(hip08_i2c_desc) },
 	{ "HISI02A3", APD_ADDR(hip08_lite_i2c_desc) },
 	{ "HISI0173", APD_ADDR(hip08_spi_desc) },
+	{ "LECA0002", APD_ADDR(leca_spi_desc) },
 	{ "NXP0001", APD_ADDR(nxp_i2c_desc) },
 #endif
 	{ }
diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index 1bfdf24c3227..e131520fe887 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -226,8 +226,8 @@ static int dw_spi_hssi_init(struct platform_device *pdev,
 	return 0;
 }
 
-static int dw_spi_intel_init(struct platform_device *pdev,
-			     struct dw_spi_mmio *dwsmmio)
+static int dw_spi_hssi_no_dma_init(struct platform_device *pdev,
+			           struct dw_spi_mmio *dwsmmio)
 {
 	dwsmmio->dws.ip = DW_HSSI_ID;
 
@@ -438,7 +438,7 @@ static const struct of_device_id dw_spi_mmio_of_match[] = {
 	{ .compatible = "amazon,alpine-dw-apb-ssi", .data = dw_spi_alpine_init},
 	{ .compatible = "renesas,rzn1-spi", .data = dw_spi_pssi_init},
 	{ .compatible = "snps,dwc-ssi-1.01a", .data = dw_spi_hssi_init},
-	{ .compatible = "intel,keembay-ssi", .data = dw_spi_intel_init},
+	{ .compatible = "intel,keembay-ssi", .data = dw_spi_hssi_no_dma_init},
 	{
 		.compatible = "intel,mountevans-imc-ssi",
 		.data = dw_spi_mountevans_imc_init,
@@ -453,6 +453,7 @@ MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match);
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id dw_spi_mmio_acpi_match[] = {
 	{"HISI0173", (kernel_ulong_t)dw_spi_pssi_init},
+	{"LECA0002", (kernel_ulong_t)dw_spi_hssi_no_dma_init},
 	{},
 };
 MODULE_DEVICE_TABLE(acpi, dw_spi_mmio_acpi_match);
-- 
2.43.0


  parent reply	other threads:[~2026-05-15 11:04 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-14  3:43 [PATCH 0/3] Add LECARC ACPI IDs for DesignWare GPIO, SPI, I2C thomas
2026-05-14  3:43 ` [PATCH 1/3] Add ACPI ID "LECA0001" for LECARC SoCs that use the DesignWare GPIO controller with V1 register offsets thomas
2026-05-14  3:43 ` [PATCH 2/3] Add ACPI ID "LECA0002" for LECARC SoCs. This ID requires a custom initialization function dw_spi_lecarc_init() that sets dws->dws.ip to DW_HSSI_ID thomas
2026-05-14  3:43 ` [PATCH 3/3] Add ACPI ID "LECA0003" for LECARC SoCs that integrate the DesignWare I2C controller thomas
2026-05-14  7:06 ` [PATCH 0/3] Add LECARC ACPI IDs for DesignWare GPIO, SPI, I2C Mark Brown
2026-05-15 11:03 ` [PATCH v2 0/3] arm64: " Thomas Lin
2026-05-15 11:03   ` [PATCH v2 1/3] gpio: dwapb: Add ACPI ID LECA0001 for LECARC SoCs Thomas Lin
2026-05-15 11:03   ` Thomas Lin [this message]
2026-05-15 11:03   ` [PATCH v2 3/3] i2c: designware: Add ACPI ID LECA0003 " Thomas Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260515110322.2883310-3-thomas_lin@lecomputing.com \
    --to=thomas_lin@lecomputing.com \
    --cc=andi.shyti@kernel.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=andy_jiang@lecomputing.com \
    --cc=aurora_jiang@lecomputing.com \
    --cc=braden_zhang@lecomputing.com \
    --cc=brgl@kernel.org \
    --cc=broonie@kernel.org \
    --cc=harold_wu@lecomputing.com \
    --cc=hoan@os.amperecomputing.com \
    --cc=jihua_tao@lecomputing.com \
    --cc=jsd@semihalf.com \
    --cc=lenb@kernel.org \
    --cc=linusw@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=lucas_hao@lecomputing.com \
    --cc=lumin_liu@lecomputing.com \
    --cc=mika.westerberg@linux.intel.com \
    --cc=notics_zhang@lecomputing.com \
    --cc=puntar_liu@lecomputing.com \
    --cc=rafael@kernel.org \
    --cc=ryen_lin@lecomputing.com \
    --cc=stan_xu@lecomputing.com \
    --cc=will_zhang@lecomputing.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.