From: Bjorn Helgaas <helgaas@kernel.org>
To: Nicolin Chen <nicolinc@nvidia.com>
Cc: jgg@nvidia.com, will@kernel.org, joro@8bytes.org,
bhelgaas@google.com, robin.murphy@arm.com, praan@google.com,
baolu.lu@linux.intel.com, kevin.tian@intel.com,
miko.lenczewski@arm.com, linux-arm-kernel@lists.infradead.org,
iommu@lists.linux.dev, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org, dan.j.williams@intel.com,
jonathan.cameron@huawei.com, vsethi@nvidia.com,
linux-cxl@vger.kernel.org, nirmoyd@nvidia.com
Subject: Re: [PATCH v5 2/3] PCI: Allow ATS to be always on for pre-CXL devices
Date: Wed, 20 May 2026 15:04:09 -0500 [thread overview]
Message-ID: <20260520200409.GA88687@bhelgaas> (raw)
In-Reply-To: <35e75bf0abfa48f76bc87d73a772a3faf6271a9f.1779304390.git.nicolinc@nvidia.com>
On Wed, May 20, 2026 at 12:46:09PM -0700, Nicolin Chen wrote:
> Some NVIDIA GPU/NIC devices, though they don't implement CXL config space,
> have many CXL-like properties. Call this kind "pre-CXL".
>
> Similar to CXL.cache capability, these pre-CXL devices also require the ATS
> function even when their RIDs are IOMMU bypassed, i.e. keep ATS "always on"
> v.s. "on demand" when a non-zero PASID line gets enabled in SVA use cases.
>
> Introduce pci_dev_specific_ats_required() quirk function to scan a list of
> IDs for these devices. Then, include it in pci_ats_required().
>
> Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
> Reviewed-by: Nirmoy Das <nirmoyd@nvidia.com>
> Tested-by: Nirmoy Das <nirmoyd@nvidia.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
> Reviewed-by: Kevin Tian <kevin.tian@intel.com>
> Reviewed-by: Dave Jiang <dave.jiang@intel.com>
> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
> ---
> drivers/pci/pci.h | 9 +++++++++
> drivers/pci/ats.c | 3 ++-
> drivers/pci/quirks.c | 42 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 53 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index 4a14f88e543a2..e8ad27abb1cfe 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -1155,6 +1155,15 @@ static inline int pci_dev_specific_reset(struct pci_dev *dev, bool probe)
> }
> #endif
>
> +#if defined(CONFIG_PCI_QUIRKS) && defined(CONFIG_PCI_ATS)
> +bool pci_dev_specific_ats_required(struct pci_dev *dev);
> +#else
> +static inline bool pci_dev_specific_ats_required(struct pci_dev *dev)
> +{
> + return false;
> +}
> +#endif
> +
> #if defined(CONFIG_PCI_QUIRKS) && defined(CONFIG_ARM64)
> int acpi_get_rc_resources(struct device *dev, const char *hid, u16 segment,
> struct resource *res);
> diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
> index ebdf761843867..3a04d5b04c883 100644
> --- a/drivers/pci/ats.c
> +++ b/drivers/pci/ats.c
> @@ -247,7 +247,8 @@ bool pci_ats_required(struct pci_dev *pdev)
> if (pdev->is_virtfn)
> pdev = pci_physfn(pdev);
>
> - return pci_cxl_ats_required(pdev);
> + return pci_cxl_ats_required(pdev) ||
> + pci_dev_specific_ats_required(pdev);
> }
> EXPORT_SYMBOL_GPL(pci_ats_required);
>
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index caaed1a01dc02..c0242f3e9f063 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -5715,6 +5715,48 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1457, quirk_intel_e2000_no_ats);
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1459, quirk_intel_e2000_no_ats);
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x145a, quirk_intel_e2000_no_ats);
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x145c, quirk_intel_e2000_no_ats);
> +
> +static bool quirk_nvidia_gpu_ats_required(struct pci_dev *pdev)
> +{
> + switch (pdev->device) {
> + case 0x2e00 ... 0x2e3f: /* GB20B */
> + return true;
> + }
> + return false;
> +}
> +
> +static const struct pci_dev_ats_required {
> + u16 vendor;
> + u16 device;
> + bool (*ats_required)(struct pci_dev *dev);
> +} pci_dev_ats_required[] = {
> + /* NVIDIA GPUs */
> + { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, quirk_nvidia_gpu_ats_required },
> + /* NVIDIA CX10 Family NVlink-C2C */
> + { PCI_VENDOR_ID_MELLANOX, 0x2101, NULL },
> + { 0 }
> +};
> +
> +/*
> + * Some NVIDIA devices do not implement CXL config space, but present as PCIe
> + * devices that can issue CXL-like cache operations like CXL.cache. Thus, they
> + * require ATS to obtain host physical addresses, like pci_cxl_ats_required().
> + */
> +bool pci_dev_specific_ats_required(struct pci_dev *pdev)
> +{
> + const struct pci_dev_ats_required *i;
> +
> + for (i = pci_dev_ats_required; i->vendor; i++) {
> + if (i->vendor != pdev->vendor)
> + continue;
> + if (i->ats_required && i->ats_required(pdev))
> + return true;
> + if (!i->ats_required && i->device == pdev->device)
> + return true;
> + }
> +
> + return false;
> +}
> #endif /* CONFIG_PCI_ATS */
>
> /* Freescale PCIe doesn't support MSI in RC mode */
> --
> 2.43.0
>
next prev parent reply other threads:[~2026-05-20 20:04 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-20 19:46 [PATCH v5 0/3] Allow ATS to be always on for certain ATS-capable devices Nicolin Chen
2026-05-20 19:46 ` [PATCH v5 1/3] PCI: Add pci_ats_required() for CXL.cache capable devices Nicolin Chen
2026-05-20 20:03 ` Bjorn Helgaas
2026-05-20 20:20 ` Nicolin Chen
2026-05-20 20:26 ` sashiko-bot
2026-05-20 19:46 ` [PATCH v5 2/3] PCI: Allow ATS to be always on for pre-CXL devices Nicolin Chen
2026-05-20 20:04 ` Bjorn Helgaas [this message]
2026-05-20 20:46 ` sashiko-bot
2026-05-20 19:46 ` [PATCH v5 3/3] iommu/arm-smmu-v3: Allow ATS to be always on Nicolin Chen
2026-05-20 21:33 ` sashiko-bot
2026-05-20 22:35 ` Nicolin Chen
2026-05-21 13:44 ` Jason Gunthorpe
2026-05-21 17:44 ` Nicolin Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260520200409.GA88687@bhelgaas \
--to=helgaas@kernel.org \
--cc=baolu.lu@linux.intel.com \
--cc=bhelgaas@google.com \
--cc=dan.j.williams@intel.com \
--cc=iommu@lists.linux.dev \
--cc=jgg@nvidia.com \
--cc=jonathan.cameron@huawei.com \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=miko.lenczewski@arm.com \
--cc=nicolinc@nvidia.com \
--cc=nirmoyd@nvidia.com \
--cc=praan@google.com \
--cc=robin.murphy@arm.com \
--cc=vsethi@nvidia.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.