All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vitor Soares <ivitro@gmail.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Jessica Zhang <jesszhan0024@gmail.com>,
	David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, Nishanth Menon <nm@ti.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	Thierry Reding <thierry.reding@gmail.com>
Cc: Vitor Soares <vitor.soares@toradex.com>,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 09/11] arm64: dts: ti: k3-am62-verdin: Add Toradex OV5640 CSI Cameras
Date: Fri, 22 May 2026 17:11:13 +0100	[thread overview]
Message-ID: <20260522161105.277519-22-ivitro@gmail.com> (raw)
In-Reply-To: <20260522161105.277519-13-ivitro@gmail.com>

From: Vitor Soares <vitor.soares@toradex.com>

Add device tree overlays for the Toradex OV5640 CSI Cameras on Verdin
CSI_1. Two variants are supported: the current CSI Camera Set 5MP OV5640
with a 27 MHz oscillator and the legacy CSI Camera Module 5MP OV5640
with a 24 MHz oscillator.

Link: https://developer.toradex.com/hardware/accessories/cameras/csi-camera-module-5mp-ov5640-arducam
Link: https://developer.toradex.com/hardware/legacy-products/other/csi-camera-module-5mp-ov5640/
Assisted-by: Claude:claude-sonnet-4.6
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
---
 arch/arm64/boot/dts/ti/Makefile               |  8 +++
 .../dts/ti/k3-am625-verdin-ov5640-24mhz.dtso  | 17 +++++
 .../boot/dts/ti/k3-am625-verdin-ov5640.dtsi   | 71 +++++++++++++++++++
 .../boot/dts/ti/k3-am625-verdin-ov5640.dtso   | 18 +++++
 4 files changed, 114 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640-24mhz.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640.dtso

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 31c9bc1d48b1..60844951c9ce 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -41,6 +41,8 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-ivy.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-mallow.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-zinnia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-ov5640-24mhz.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-ov5640.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-panel-cap-touch-10inch-dsi.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-panel-cap-touch-10inch-lvds.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-panel-cap-touch-7inch-dsi.dtbo
@@ -228,6 +230,10 @@ k3-am625-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch-dtbs := \
 	k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtbo
 k3-am625-verdin-wifi-dev-nau8822-btl-dtbs := k3-am625-verdin-wifi-dev.dtb \
 	k3-am625-verdin-dev-nau8822-btl.dtbo
+k3-am625-verdin-wifi-dev-ov5640-24mhz-dtbs := k3-am625-verdin-wifi-dev.dtb \
+	k3-am625-verdin-ov5640-24mhz.dtbo
+k3-am625-verdin-wifi-dev-ov5640-dtbs := k3-am625-verdin-wifi-dev.dtb \
+	k3-am625-verdin-ov5640.dtbo
 k3-am625-verdin-wifi-dev-panel-cap-touch-7inch-dsi-dtbs := \
 	k3-am625-verdin-wifi-dev.dtb \
 	k3-am625-verdin-panel-cap-touch-7inch-dsi.dtbo
@@ -339,6 +345,8 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-am625-sk-hdmi-audio.dtb \
 	k3-am625-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch.dtb \
 	k3-am625-verdin-wifi-dev-nau8822-btl.dtb \
+	k3-am625-verdin-wifi-dev-ov5640-24mhz.dtb \
+	k3-am625-verdin-wifi-dev-ov5640.dtb \
 	k3-am625-verdin-wifi-dev-panel-cap-touch-7inch-dsi.dtb \
 	k3-am625-verdin-wifi-dev-uart4-mcu.dtb \
 	k3-am625-verdin-wifi-mallow-panel-cap-touch-10inch-lvds.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640-24mhz.dtso b/arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640-24mhz.dtso
new file mode 100644
index 000000000000..7089336fa5b4
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640-24mhz.dtso
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * Toradex CSI Camera Module 5MP OV5640 on Verdin CSI_1.
+ *
+ * https://developer.toradex.com/hardware/legacy-products/other/csi-camera-module-5mp-ov5640/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include "k3-am625-verdin-ov5640.dtsi"
+
+&clk_ov5640_osc {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640.dtsi b/arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640.dtsi
new file mode 100644
index 000000000000..eb3df9d85517
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * Common device tree include for Toradex OV5640 CSI camera on Verdin CSI_1.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_ov5640_osc: ov5640-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	regulator_camera: regulator-camera {
+		compatible = "regulator-fixed";
+		/* Verdin GPIO_8_CSI (SODIMM 222) - CAM_1_CON_PWRCTRL */
+		gpio = <&main_gpio0 42 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "V_CSI";
+		startup-delay-us = <5000>;
+	};
+};
+
+&csi0_port0 {
+	status = "okay";
+
+	csi2rx0_in_sensor: endpoint {
+		remote-endpoint = <&csi2_cam0>;
+		bus-type = <4>; /* CSI2 DPHY */
+		clock-lanes = <0>;
+		data-lanes = <1 2>;
+	};
+};
+
+&dphy0 {
+	status = "okay";
+};
+
+&main_i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_osc>;
+		clock-names = "xclk";
+		AVDD-supply = <&regulator_camera>;
+		DOVDD-supply = <&regulator_camera>;
+		DVDD-supply = <&regulator_camera>;
+		/* Verdin GPIO_6 (SODIMM 218) - CAM_1_CON_PWRDWN */
+		powerdown-gpios = <&main_gpio0 36 GPIO_ACTIVE_HIGH>;
+		/* Verdin GPIO_5 (SODIMM 216) - CAM_1_CON_RST */
+		reset-gpios = <&main_gpio0 40 GPIO_ACTIVE_LOW>;
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2rx0_in_sensor>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640.dtso
new file mode 100644
index 000000000000..e7f02cfaa94f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640.dtso
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * Toradex CSI Camera Set 5MP OV5640 on Verdin CSI_1.
+ *
+ * https://developer.toradex.com/hardware/accessories/cameras/csi-camera-module-5mp-ov5640-arducam
+ * https://www.toradex.com/accessories/csi-camera-ov5640
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include "k3-am625-verdin-ov5640.dtsi"
+
+&clk_ov5640_osc {
+	clock-frequency = <27000000>;
+};
-- 
2.54.0


  parent reply	other threads:[~2026-05-22 16:12 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-22 16:11 [PATCH v3 00/11] arm64: dts: ti: k3-am62-verdin: Add display and peripheral overlays Vitor Soares
2026-05-22 16:11 ` [PATCH v3 01/11] arm64: dts: ti: k3-am62-verdin: Add Toradex DSI to LVDS adapter with 10.1" display Vitor Soares
2026-05-22 16:11 ` [PATCH v3 02/11] arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS Vitor Soares
2026-05-22 16:11 ` [PATCH v3 03/11] dt-bindings: vendor-prefixes: Add Riverdi Vitor Soares
2026-05-22 16:11 ` [PATCH v3 04/11] dt-bindings: display: panel-lvds: Add Riverdi RVT70HSLNWCA0 and RVT101HVLNWC00 Vitor Soares
2026-05-22 16:11 ` [PATCH v3 05/11] arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" DSI Vitor Soares
2026-05-22 16:36   ` sashiko-bot
2026-05-22 16:11 ` [PATCH v3 06/11] arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 7" DSI Vitor Soares
2026-05-22 16:42   ` sashiko-bot
2026-05-29 15:53   ` Nishanth Menon
2026-05-29 16:02     ` Francesco Dolcini
2026-05-29 16:14       ` Nishanth Menon
2026-05-22 16:11 ` [PATCH v3 07/11] arm64: dts: ti: k3-am62-verdin: Add NAU8822 Bridge Tied Load Vitor Soares
2026-05-22 16:11 ` [PATCH v3 08/11] arm64: dts: ti: k3-am62-verdin: Reserve UART_4 for Cortex-M4F Vitor Soares
2026-05-22 16:11 ` Vitor Soares [this message]
2026-05-22 16:11 ` [PATCH v3 10/11] arm64: dts: ti: k3-am62-verdin: Add Toradex Verdin Mezzanine CAN Vitor Soares
2026-05-22 16:11 ` [PATCH v3 11/11] arm64: dts: ti: k3-am62-verdin: Add Mezzanine with Toradex Display 10.1" LVDS Vitor Soares
2026-05-22 17:05 ` [PATCH v3 00/11] arm64: dts: ti: k3-am62-verdin: Add display and peripheral overlays Francesco Dolcini
2026-05-26 14:53 ` (subset) " Neil Armstrong
2026-05-28 11:40   ` Nishanth Menon
2026-05-29 13:41     ` Neil Armstrong
2026-05-29 13:45 ` Neil Armstrong
2026-05-29 20:08 ` Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260522161105.277519-22-ivitro@gmail.com \
    --to=ivitro@gmail.com \
    --cc=airlied@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jesszhan0024@gmail.com \
    --cc=kristo@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=nm@ti.com \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=robh@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=thierry.reding@gmail.com \
    --cc=tzimmermann@suse.de \
    --cc=vigneshr@ti.com \
    --cc=vitor.soares@toradex.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.