[PATCH] HID: wacom: stop hardware after post-start probe failures

[Myeonghun Pak <mhun512@gmail.com>]

wacom_parse_and_register() starts HID hardware before registering inputs
and initializing pad LEDs/remotes. Those later steps can fail, but their
error paths currently release Wacom resources without stopping the HID
hardware.

Route post-hid_hw_start() failures through hid_hw_stop() before
releasing driver resources.

This issue was identified during our ongoing static-analysis research while
reviewing kernel code.

Fixes: c1d6708bf0d3 ("HID: wacom: Do not register input devices until after hid_hw_start")
Cc: stable@vger.kernel.org
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
---
 drivers/hid/wacom_sys.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index 0d1c6d90fe..c824d9c224 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -2456,16 +2456,16 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
 
 	error = wacom_register_inputs(wacom);
 	if (error)
-		goto fail;
+		goto fail_hw_stop;
 
 	if (wacom->wacom_wac.features.device_type & WACOM_DEVICETYPE_PAD) {
 		error = wacom_initialize_leds(wacom);
 		if (error)
-			goto fail;
+			goto fail_hw_stop;
 
 		error = wacom_initialize_remotes(wacom);
 		if (error)
-			goto fail;
+			goto fail_hw_stop;
 	}
 
 	if (!wireless) {
@@ -2496,6 +2496,7 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
 	return 0;
 
 fail_quirks:
+fail_hw_stop:
 	hid_hw_stop(hdev);
 fail:
 	wacom_release_resources(wacom);
-- 
2.47.1