[PATCH v4 1/8] hw/acpi: Support extended GPE handling for additional ACPI devices

[Leonid Bloch <lb.workbox@gmail.com>]

This patch extends the GPE (General Purpose Event) handling to support
the maximum number of interrupts available based on the machine's GPE
register length, rather than being limited to the first 8 bits.

This change is needed to support additional ACPI devices that will be
introduced in subsequent patches (Battery, AC adapter, and button devices).
These new devices require GPE event bits beyond the first 8, which were
previously not being properly handled by the event sending and SCI
(System Control Interrupt) update mechanisms.

The actual number of available GPE interrupts varies by machine type:
- PIIX4: GPE_LEN = 4 (32 bits total across status and enable registers)
- ICH9: ICH9_PMIO_GPE0_LEN = 16 (128 bits total)

The patch modifies:
- acpi_send_gpe_event(): Now properly propagates status bits across all
  available GPE registers based on the machine's gpe.len value
- acpi_update_sci(): Checks all GPE registers for pending interrupts,
  not just the first byte

Note: A future enhancement could refactor the GPE handling to use the
bitmap API from bitops.h instead of the current manual bit manipulation,
which would provide a cleaner interface for these operations.

Signed-off-by: Leonid Bloch <lb.workbox@gmail.com>
---
 hw/acpi/core.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/hw/acpi/core.c b/hw/acpi/core.c
index a6a62a742d..ad7abe568d 100644
--- a/hw/acpi/core.c
+++ b/hw/acpi/core.c
@@ -733,19 +733,32 @@ uint32_t acpi_gpe_ioport_readb(ACPIREGS *ar, uint32_t addr)
 void acpi_send_gpe_event(ACPIREGS *ar, qemu_irq irq,
                          AcpiEventStatusBits status)
 {
-    ar->gpe.sts[0] |= status;
+    int i;
+    AcpiEventStatusBits st = status;
+
+    for (i = 0; i < ar->gpe.len / 2; i++) {
+        ar->gpe.sts[i] |= st;
+        st >>= TYPE_WIDTH(ar->gpe.sts[0]);
+    }
+
     acpi_update_sci(ar, irq);
 }
 
 void acpi_update_sci(ACPIREGS *regs, qemu_irq irq)
 {
     int sci_level, pm1a_sts;
+    bool gpe_sci = false;
+    int i;
 
     pm1a_sts = acpi_pm1_evt_get_sts(regs);
 
+    for (i = 0; i < regs->gpe.len / 2; i++) {
+        gpe_sci = gpe_sci || !!(regs->gpe.sts[i] & regs->gpe.en[i]);
+    }
+
     sci_level = ((pm1a_sts &
                   regs->pm1.evt.en & ACPI_BITMASK_PM1_COMMON_ENABLED) != 0) ||
-                ((regs->gpe.sts[0] & regs->gpe.en[0]) != 0);
+                gpe_sci;
 
     qemu_set_irq(irq, sci_level);
 
-- 
2.54.0