All of lore.kernel.org
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Kiryl Shutsemau" <kirill@shutemov.name>
Cc: kvm@vger.kernel.org
Subject: Re: [PATCH v5 09/18] mm: add MM_CP_UFFD_RWP change_protection() flag
Date: Tue, 26 May 2026 14:07:29 +0000	[thread overview]
Message-ID: <20260526140730.C24331F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260526130509.2748441-10-kirill@shutemov.name>

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] `pgtable_split_needed()` does not force a split for `MM_CP_UFFD_RWP` on file THPs, leading to silent loss of RWP tracking on transparent split.
--

commit 6bd2366f8f7b6b871a5d79d6481ff66d78832c91
Author: Kiryl Shutsemau (Meta) <kas@kernel.org>

mm: add MM_CP_UFFD_RWP change_protection() flag

This commit introduces the MM_CP_UFFD_RWP and MM_CP_UFFD_RWP_RESOLVE
change_protection() flags for userfaultfd RWP. It wires these flags through
change_pte_range(), change_huge_pmd(), and hugetlb_change_protection() to
allow installing PAGE_NONE with the uffd PTE bit set.

> diff --git a/include/linux/mm.h b/include/linux/mm.h
> index 6499cfb61dc4b..f79801816f327 100644
> --- a/include/linux/mm.h
> +++ b/include/linux/mm.h
> @@ -3297,6 +3297,11 @@ int get_cmdline(struct task_struct *task, char *buffer, int buflen);
>  #define  MM_CP_UFFD_WP_RESOLVE             (1UL << 3) /* Resolve wp */
>  #define  MM_CP_UFFD_WP_ALL                 (MM_CP_UFFD_WP | \
>  					    MM_CP_UFFD_WP_RESOLVE)
> +/* Whether this change is for uffd RWP */
> +#define  MM_CP_UFFD_RWP                    (1UL << 4) /* do rwp */
> +#define  MM_CP_UFFD_RWP_RESOLVE            (1UL << 5) /* resolve rwp */
> +#define  MM_CP_UFFD_RWP_ALL                (MM_CP_UFFD_RWP | \
> +					    MM_CP_UFFD_RWP_RESOLVE)

[Severity: High]
Does pgtable_split_needed() need to be updated to force a split for
MM_CP_UFFD_RWP on file THPs?

When MM_CP_UFFD_RWP is applied to a file-backed THP (e.g. shmem),
change_huge_pmd() successfully modifies the PMD to PAGE_NONE and sets the
_PAGE_UFFD bit. However, unlike anonymous THPs, file-backed THPs are split
by completely erasing the PMD (pmdp_huge_clear_flush()), leaving the PTEs
to be re-instantiated from the page cache upon the next page fault.

Because pgtable_split_needed() was not updated to check cp_flags for
MM_CP_UFFD_RWP, it allows RWP to be applied to the huge PMD without forcing
a split first.

If the kernel later splits this THP (e.g., due to memory pressure or a
shrinker), the PMD is erased and the RWP tracking state is irreversibly
lost. The next user access will trigger a standard missing page fault that
maps the file page readable (vma->vm_page_prot), silently bypassing the RWP
tracking for a previously protected, populated page.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260526130509.2748441-1-kirill@shutemov.name?part=9

  reply	other threads:[~2026-05-26 14:07 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-26 13:04 [PATCH v5 00/18] userfaultfd: working set tracking for VM guest memory Kiryl Shutsemau
2026-05-26 13:04 ` [PATCH v5 01/18] fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race Kiryl Shutsemau
2026-05-26 13:46   ` sashiko-bot
2026-05-26 13:04 ` [PATCH v5 02/18] mm/huge_memory: preserve pmd_swp_uffd_wp on device-private PMD downgrade Kiryl Shutsemau
2026-05-26 13:43   ` sashiko-bot
2026-05-26 13:04 ` [PATCH v5 03/18] userfaultfd: gate must_wait writability check on pte_present() Kiryl Shutsemau
2026-05-26 13:44   ` sashiko-bot
2026-05-26 13:04 ` [PATCH v5 04/18] mm: skip out-of-range bits in mk_vma_flags() Kiryl Shutsemau
2026-05-29 14:00   ` Lorenzo Stoakes
2026-05-29 16:09     ` Kiryl Shutsemau
2026-06-01  9:37       ` Lorenzo Stoakes
2026-05-30 16:52     ` Mike Rapoport
2026-06-01  7:42       ` Lorenzo Stoakes
2026-06-01 14:08       ` Kiryl Shutsemau
2026-06-01 14:28         ` Mike Rapoport
2026-05-26 13:04 ` [PATCH v5 05/18] mm: decouple protnone helpers from CONFIG_NUMA_BALANCING Kiryl Shutsemau
2026-05-26 13:04 ` [PATCH v5 06/18] mm: rename uffd-wp PTE bit macros to uffd Kiryl Shutsemau
2026-05-26 13:04 ` [PATCH v5 07/18] mm: rename uffd-wp PTE accessors " Kiryl Shutsemau
2026-05-26 13:29   ` sashiko-bot
2026-05-26 13:04 ` [PATCH v5 08/18] mm: add VM_UFFD_RWP VMA flag Kiryl Shutsemau
2026-05-26 14:37   ` sashiko-bot
2026-05-29  7:24   ` Lorenzo Stoakes
2026-05-29 13:07     ` Kiryl Shutsemau
2026-05-29 14:00       ` Lorenzo Stoakes
2026-05-26 13:04 ` [PATCH v5 09/18] mm: add MM_CP_UFFD_RWP change_protection() flag Kiryl Shutsemau
2026-05-26 14:07   ` sashiko-bot [this message]
2026-05-29  1:19   ` SeongJae Park
2026-05-26 13:04 ` [PATCH v5 10/18] mm: preserve RWP marker across PTE rewrites Kiryl Shutsemau
2026-05-26 14:15   ` sashiko-bot
2026-05-26 13:04 ` [PATCH v5 11/18] mm: handle VM_UFFD_RWP in khugepaged, rmap, and GUP Kiryl Shutsemau
2026-05-26 15:04   ` sashiko-bot
2026-05-26 13:05 ` [PATCH v5 12/18] userfaultfd: add UFFDIO_REGISTER_MODE_RWP and UFFDIO_RWPROTECT plumbing Kiryl Shutsemau
2026-05-26 14:45   ` sashiko-bot
2026-05-26 13:05 ` [PATCH v5 13/18] mm/userfaultfd: add RWP fault delivery and expose UFFDIO_REGISTER_MODE_RWP Kiryl Shutsemau
2026-05-26 14:33   ` sashiko-bot
2026-05-26 13:05 ` [PATCH v5 14/18] mm/pagemap: add PAGE_IS_ACCESSED for RWP tracking Kiryl Shutsemau
2026-05-26 14:37   ` sashiko-bot
2026-05-26 13:05 ` [PATCH v5 15/18] userfaultfd: add UFFD_FEATURE_RWP_ASYNC for async fault resolution Kiryl Shutsemau
2026-05-26 13:05 ` [PATCH v5 16/18] userfaultfd: add UFFDIO_SET_MODE for runtime sync/async toggle Kiryl Shutsemau
2026-05-26 15:07   ` sashiko-bot
2026-05-26 13:05 ` [PATCH v5 17/18] selftests/mm: add userfaultfd RWP tests Kiryl Shutsemau
2026-05-26 13:05 ` [PATCH v5 18/18] Documentation/userfaultfd: document RWP working set tracking Kiryl Shutsemau
2026-05-26 14:51   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260526140730.C24331F000E9@smtp.kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=kirill@shutemov.name \
    --cc=kvm@vger.kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.