From: <gregkh@linuxfoundation.org>
To: lukas@wunner.de,ilpo.jarvinen@linux.intel.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] platform/x86/intel/vsec: Fix enable_cnt imbalance on PCIe" failed to apply to 6.18-stable tree
Date: Thu, 28 May 2026 09:46:29 +0200 [thread overview]
Message-ID: <2026052829-promotion-chubby-ffb5@gregkh> (raw)
The patch below does not apply to the 6.18-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.18.y
git checkout FETCH_HEAD
git cherry-pick -x 348ccc754d8939e21ca5956ff45720b81d6e407f
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026052829-promotion-chubby-ffb5@gregkh' --subject-prefix 'PATCH 6.18.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 348ccc754d8939e21ca5956ff45720b81d6e407f Mon Sep 17 00:00:00 2001
From: Lukas Wunner <lukas@wunner.de>
Date: Thu, 14 May 2026 07:40:42 +0200
Subject: [PATCH] platform/x86/intel/vsec: Fix enable_cnt imbalance on PCIe
error recovery
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
After a PCIe Uncorrectable Error has been reported by a device with
Intel Vendor Specific Extended Capabilities and has been recovered
through a Secondary Bus Reset, its driver calls intel_vsec_pci_probe()
to rescan and reinitialize VSECs.
intel_vsec_pci_probe() invokes pcim_enable_device() and thereby adds
another devm action which calls pcim_disable_device() on driver unbind.
So once the driver unbinds, pcim_disable_device() will be called as many
times as an Uncorrectable Error occurred, plus one. This will lead to
an enable_cnt imbalance on driver unbind.
Additionally, since commit dc957ab6aa05 ("platform/x86/intel/vsec: Add
private data for per-device data"), a devm_kzalloc() allocation is
leaked on every Uncorrectable Error.
Avoid by splitting the VSEC rescan out of intel_vsec_pci_probe() into a
separate helper and calling that on PCIe error recovery.
Fixes: 936874b77dd0 ("platform/x86/intel/vsec: Add PCI error recovery support to Intel PMT")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v6.0+
Link: https://patch.msgid.link/bd594d09fa866dc51dddc9a447c3b23f9b1402cc.1778736835.git.lukas@wunner.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
diff --git a/drivers/platform/x86/intel/vsec.c b/drivers/platform/x86/intel/vsec.c
index 7d5dbc1c1d05..18e4a892bf0f 100644
--- a/drivers/platform/x86/intel/vsec.c
+++ b/drivers/platform/x86/intel/vsec.c
@@ -649,29 +649,13 @@ static void intel_vsec_skip_missing_dependencies(struct pci_dev *pdev)
}
}
-static int intel_vsec_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+static int intel_vsec_pci_init(struct pci_dev *pdev)
{
- const struct intel_vsec_platform_info *info;
- struct vsec_priv *priv;
- int num_caps, ret;
+ struct vsec_priv *priv = pci_get_drvdata(pdev);
+ const struct intel_vsec_platform_info *info = priv->info;
int run_once = 0;
bool found_any = false;
-
- ret = pcim_enable_device(pdev);
- if (ret)
- return ret;
-
- pci_save_state(pdev);
- info = (const struct intel_vsec_platform_info *)id->driver_data;
- if (!info)
- return -EINVAL;
-
- priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- priv->info = info;
- pci_set_drvdata(pdev, priv);
+ int num_caps;
num_caps = hweight_long(info->caps);
while (num_caps--) {
@@ -692,6 +676,31 @@ static int intel_vsec_pci_probe(struct pci_dev *pdev, const struct pci_device_id
return 0;
}
+static int intel_vsec_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ const struct intel_vsec_platform_info *info;
+ struct vsec_priv *priv;
+ int ret;
+
+ ret = pcim_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ pci_save_state(pdev);
+ info = (const struct intel_vsec_platform_info *)id->driver_data;
+ if (!info)
+ return -EINVAL;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->info = info;
+ pci_set_drvdata(pdev, priv);
+
+ return intel_vsec_pci_init(pdev);
+}
+
int intel_vsec_set_mapping(struct oobmsm_plat_info *plat_info,
struct intel_vsec_device *vsec_dev)
{
@@ -832,7 +841,6 @@ static pci_ers_result_t intel_vsec_pci_slot_reset(struct pci_dev *pdev)
{
struct intel_vsec_device *intel_vsec_dev;
pci_ers_result_t status = PCI_ERS_RESULT_DISCONNECT;
- const struct pci_device_id *pci_dev_id;
unsigned long index;
dev_info(&pdev->dev, "Resetting PCI slot\n");
@@ -853,10 +861,8 @@ static pci_ers_result_t intel_vsec_pci_slot_reset(struct pci_dev *pdev)
devm_release_action(&pdev->dev, intel_vsec_remove_aux,
&intel_vsec_dev->auxdev);
}
- pci_disable_device(pdev);
pci_restore_state(pdev);
- pci_dev_id = pci_match_id(intel_vsec_pci_ids, pdev);
- intel_vsec_pci_probe(pdev, pci_dev_id);
+ intel_vsec_pci_init(pdev);
out:
return status;
next reply other threads:[~2026-05-28 7:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-28 7:46 gregkh [this message]
2026-05-29 16:59 ` [PATCH 6.18.y 1/3] platform/x86/intel/vsec: Refactor base_addr handling Sasha Levin
2026-05-29 16:59 ` [PATCH 6.18.y 2/3] platform/x86/intel/vsec: Make driver_data info const Sasha Levin
2026-05-29 16:59 ` [PATCH 6.18.y 3/3] platform/x86/intel/vsec: Fix enable_cnt imbalance on PCIe error recovery Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026052829-promotion-chubby-ffb5@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=lukas@wunner.de \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.