From: sashiko-bot@kernel.org
To: "Inochi Amaoto" <inochiama@gmail.com>
Cc: kvm@vger.kernel.org
Subject: Re: [PATCH v2 2/7] KVM: riscv: selftests: add Svadu FWFT extension to get-reg-list test
Date: Mon, 01 Jun 2026 09:17:58 +0000 [thread overview]
Message-ID: <20260601091758.C0EDC1F00893@smtp.kernel.org> (raw)
In-Reply-To: <20260601084336.2601675-3-inochiama@gmail.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] Unconditional selftest failure in get-reg-list due to dynamically-omitted registers in the blessed list.
--
commit 6df4c1234104e4c676015802e2b610d953076f46
Author: Inochi Amaoto <inochiama@gmail.com>
KVM: riscv: selftests: add Svadu FWFT extension to get-reg-list test
This commit adds the Svadu FWFT extension registers to the get-reg-list
selftest's expected register list.
> diff --git a/tools/testing/selftests/kvm/riscv/get-reg-list.c b/tools/testing/selftests/kvm/riscv/get-reg-list.c
> index 8d6fdb5d38b89..d88edef77ccfd 100644
> --- a/tools/testing/selftests/kvm/riscv/get-reg-list.c
> +++ b/tools/testing/selftests/kvm/riscv/get-reg-list.c
[ ... ]
> @@ -905,6 +908,9 @@ static __u64 sbi_fwft_regs[] = {
> KVM_REG_RISCV | KVM_REG_SIZE_ULONG | KVM_REG_RISCV_SBI_STATE | KVM_REG_RISCV_SBI_FWFT | KVM_REG_RISCV_SBI_FWFT_REG(pointer_masking.enable),
> KVM_REG_RISCV | KVM_REG_SIZE_ULONG | KVM_REG_RISCV_SBI_STATE | KVM_REG_RISCV_SBI_FWFT | KVM_REG_RISCV_SBI_FWFT_REG(pointer_masking.flags),
> KVM_REG_RISCV | KVM_REG_SIZE_ULONG | KVM_REG_RISCV_SBI_STATE | KVM_REG_RISCV_SBI_FWFT | KVM_REG_RISCV_SBI_FWFT_REG(pointer_masking.value),
> + KVM_REG_RISCV | KVM_REG_SIZE_ULONG | KVM_REG_RISCV_SBI_STATE | KVM_REG_RISCV_SBI_FWFT | KVM_REG_RISCV_SBI_FWFT_REG(pte_ad_hw_updating.enable),
> + KVM_REG_RISCV | KVM_REG_SIZE_ULONG | KVM_REG_RISCV_SBI_STATE | KVM_REG_RISCV_SBI_FWFT | KVM_REG_RISCV_SBI_FWFT_REG(pte_ad_hw_updating.flags),
> + KVM_REG_RISCV | KVM_REG_SIZE_ULONG | KVM_REG_RISCV_SBI_STATE | KVM_REG_RISCV_SBI_FWFT | KVM_REG_RISCV_SBI_FWFT_REG(pte_ad_hw_updating.value),
> };
[Severity: Medium]
Will this cause an unconditional selftest failure when the SVADU extension
is disabled?
The RISC-V get-reg-list selftest disables all ISA extensions (including SVADU)
by default to ensure a clean baseline. The KVM implementation conditionally
exposes these pte_ad_hw_updating registers only if the SVADU ISA extension is
enabled on the vCPU.
Because the registers are added unconditionally to the expected list here,
and RISC-V does not override check_supported_reg() to conditionally filter
them out, KVM omitting these registers from KVM_GET_REG_LIST will cause the
test framework to fail with a missing registers assertion.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260601084336.2601675-1-inochiama@gmail.com?part=2
next prev parent reply other threads:[~2026-06-01 9:17 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-01 8:43 [PATCH v2 0/7] RISC-V: KVM: Add Svadu/Zicfiss/Zicfilp FWFT support Inochi Amaoto
2026-06-01 8:43 ` Inochi Amaoto
2026-06-01 8:43 ` Inochi Amaoto
2026-06-01 8:43 ` [PATCH v2 1/7] RISC-V: KVM: Add support for Svadu FWFT features Inochi Amaoto
2026-06-01 8:43 ` Inochi Amaoto
2026-06-01 8:43 ` Inochi Amaoto
2026-06-01 9:04 ` sashiko-bot
2026-06-01 8:43 ` [PATCH v2 2/7] KVM: riscv: selftests: add Svadu FWFT extension to get-reg-list test Inochi Amaoto
2026-06-01 8:43 ` Inochi Amaoto
2026-06-01 8:43 ` Inochi Amaoto
2026-06-01 9:17 ` sashiko-bot [this message]
2026-06-01 8:43 ` [PATCH v2 3/7] RISC-V: KVM: Only enable Svadu extension when Guest/VM requests Inochi Amaoto
2026-06-01 8:43 ` Inochi Amaoto
2026-06-01 8:43 ` Inochi Amaoto
2026-06-01 9:32 ` sashiko-bot
2026-06-01 8:43 ` [PATCH v2 4/7] RISC-V: KVM: Allow Zicfiss/Zicfilp extensions for Guest/VM Inochi Amaoto
2026-06-01 8:43 ` Inochi Amaoto
2026-06-01 8:43 ` Inochi Amaoto
2026-06-01 9:45 ` sashiko-bot
2026-06-01 11:16 ` Inochi Amaoto
2026-06-01 11:16 ` Inochi Amaoto
2026-06-01 11:16 ` Inochi Amaoto
2026-06-03 7:46 ` Anup Patel
2026-06-03 7:46 ` Anup Patel
2026-06-03 7:46 ` Anup Patel
2026-06-03 8:02 ` Inochi Amaoto
2026-06-03 8:02 ` Inochi Amaoto
2026-06-03 8:02 ` Inochi Amaoto
2026-06-01 8:43 ` [PATCH v2 5/7] RISC-V: KVM: Handle software-check exits for VCPU Inochi Amaoto
2026-06-01 8:43 ` Inochi Amaoto
2026-06-01 8:43 ` Inochi Amaoto
2026-06-01 9:58 ` sashiko-bot
2026-06-01 8:43 ` [PATCH v2 6/7] RISC-V: KVM: Add support for control-flow integrity FWFT features Inochi Amaoto
2026-06-01 8:43 ` Inochi Amaoto
2026-06-01 8:43 ` Inochi Amaoto
2026-06-01 10:30 ` sashiko-bot
2026-06-01 8:43 ` [PATCH v2 7/7] KVM: riscv: selftests: add Zicfiss/Zicfilp extension to get-reg-list test Inochi Amaoto
2026-06-01 8:43 ` Inochi Amaoto
2026-06-01 8:43 ` Inochi Amaoto
2026-06-01 10:48 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260601091758.C0EDC1F00893@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=inochiama@gmail.com \
--cc=kvm@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.