From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Wayne Chang <waynec@nvidia.com>,
Wei-Cheng Chen <weichengc@nvidia.com>,
Jon Hunter <jonathanh@nvidia.com>, Vinod Koul <vkoul@kernel.org>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.15.y 2/2] phy: tegra: xusb: Fix per-pad high-speed termination calibration
Date: Mon, 1 Jun 2026 07:02:18 -0400 [thread overview]
Message-ID: <20260601110218.439979-2-sashal@kernel.org> (raw)
In-Reply-To: <20260601110218.439979-1-sashal@kernel.org>
From: Wayne Chang <waynec@nvidia.com>
[ Upstream commit da110228b54f2e2143d97ea7151e0dc22e539d67 ]
The existing code reads a single hs_term_range_adj value from bit field
[10:7] of FUSE_SKU_CALIB_0 and applies it to all USB2 pads uniformly.
However, on SoCs that support per-pad termination, each pad has its own
hs_term_range_adj field: pad 0 in FUSE_SKU_CALIB_0[10:7], and pads 1-3
in FUSE_USB_CALIB_EXT_0 at bit offsets [8:5], [12:9], and [16:13]
respectively.
Fix the calibration by reading per-pad values from the appropriate fuse
registers. For SoCs that do not support per-pad termination, replicate
pad 0's value to all pads to maintain existing behavior.
Add a has_per_pad_term flag to the SoC data to indicate whether per-pad
termination values are available in FUSE_USB_CALIB_EXT_0.
Fixes: 1ef535c6ba8e ("phy: tegra: xusb: Add Tegra194 support")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wei-Cheng Chen <weichengc@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260504033305.2283145-1-weichengc@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/phy/tegra/xusb-tegra186.c | 32 ++++++++++++++++++++++++-------
drivers/phy/tegra/xusb.h | 1 +
2 files changed, 26 insertions(+), 7 deletions(-)
diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
index 559224f9d0cd9..2dd1668c659a1 100644
--- a/drivers/phy/tegra/xusb-tegra186.c
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -20,8 +20,8 @@
/* FUSE USB_CALIB registers */
#define HS_CURR_LEVEL_PADX_SHIFT(x) ((x) ? (11 + (x - 1) * 6) : 0)
#define HS_CURR_LEVEL_PAD_MASK 0x3f
-#define HS_TERM_RANGE_ADJ_SHIFT 7
-#define HS_TERM_RANGE_ADJ_MASK 0xf
+#define HS_TERM_RANGE_ADJ_PADX_SHIFT(x) ((x) ? (5 + (x - 1) * 4) : 7)
+#define HS_TERM_RANGE_ADJ_PAD_MASK 0xf
#define HS_SQUELCH_SHIFT 29
#define HS_SQUELCH_MASK 0x7
@@ -238,7 +238,7 @@
struct tegra_xusb_fuse_calibration {
u32 *hs_curr_level;
u32 hs_squelch;
- u32 hs_term_range_adj;
+ u32 *hs_term_range_adj;
u32 rpd_ctrl;
};
@@ -864,7 +864,7 @@ static int tegra186_utmi_phy_power_on(struct phy *phy)
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
value &= ~TERM_RANGE_ADJ(~0);
- value |= TERM_RANGE_ADJ(priv->calib.hs_term_range_adj);
+ value |= TERM_RANGE_ADJ(priv->calib.hs_term_range_adj[index]);
value &= ~RPD_CTRL(~0);
value |= RPD_CTRL(priv->calib.rpd_ctrl);
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
@@ -1400,17 +1400,23 @@ static const char * const tegra186_usb3_functions[] = {
static int
tegra186_xusb_read_fuse_calibration(struct tegra186_xusb_padctl *padctl)
{
+ const struct tegra_xusb_padctl_soc *soc = padctl->base.soc;
struct device *dev = padctl->base.dev;
unsigned int i, count;
u32 value, *level;
+ u32 *hs_term_range_adj;
int err;
- count = padctl->base.soc->ports.usb2.count;
+ count = soc->ports.usb2.count;
level = devm_kcalloc(dev, count, sizeof(u32), GFP_KERNEL);
if (!level)
return -ENOMEM;
+ hs_term_range_adj = devm_kcalloc(dev, count, sizeof(u32), GFP_KERNEL);
+ if (!hs_term_range_adj)
+ return -ENOMEM;
+
err = tegra_fuse_readl(TEGRA_FUSE_SKU_CALIB_0, &value);
if (err) {
if (err != -EPROBE_DEFER)
@@ -1429,8 +1435,8 @@ tegra186_xusb_read_fuse_calibration(struct tegra186_xusb_padctl *padctl)
padctl->calib.hs_squelch = (value >> HS_SQUELCH_SHIFT) &
HS_SQUELCH_MASK;
- padctl->calib.hs_term_range_adj = (value >> HS_TERM_RANGE_ADJ_SHIFT) &
- HS_TERM_RANGE_ADJ_MASK;
+ hs_term_range_adj[0] = (value >> HS_TERM_RANGE_ADJ_PADX_SHIFT(0)) &
+ HS_TERM_RANGE_ADJ_PAD_MASK;
err = tegra_fuse_readl(TEGRA_FUSE_USB_CALIB_EXT_0, &value);
if (err) {
@@ -1442,6 +1448,17 @@ tegra186_xusb_read_fuse_calibration(struct tegra186_xusb_padctl *padctl)
padctl->calib.rpd_ctrl = (value >> RPD_CTRL_SHIFT) & RPD_CTRL_MASK;
+ for (i = 1; i < count; i++) {
+ if (soc->has_per_pad_term)
+ hs_term_range_adj[i] =
+ (value >> HS_TERM_RANGE_ADJ_PADX_SHIFT(i)) &
+ HS_TERM_RANGE_ADJ_PAD_MASK;
+ else
+ hs_term_range_adj[i] = hs_term_range_adj[0];
+ }
+
+ padctl->calib.hs_term_range_adj = hs_term_range_adj;
+
return 0;
}
@@ -1643,6 +1660,7 @@ const struct tegra_xusb_padctl_soc tegra194_xusb_padctl_soc = {
.supply_names = tegra194_xusb_padctl_supply_names,
.num_supplies = ARRAY_SIZE(tegra194_xusb_padctl_supply_names),
.supports_gen2 = true,
+ .has_per_pad_term = true,
};
EXPORT_SYMBOL_GPL(tegra194_xusb_padctl_soc);
#endif
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index 034f7a2c28d62..5fb58df54953a 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -431,6 +431,7 @@ struct tegra_xusb_padctl_soc {
unsigned int num_supplies;
bool supports_gen2;
bool need_fake_usb3_port;
+ bool has_per_pad_term;
};
struct tegra_xusb_padctl {
--
2.53.0
prev parent reply other threads:[~2026-06-01 11:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-28 11:43 FAILED: patch "[PATCH] phy: tegra: xusb: Fix per-pad high-speed termination" failed to apply to 5.15-stable tree gregkh
2026-06-01 11:02 ` [PATCH 5.15.y 1/2] phy: tegra: xusb: Disable trk clk when not in use Sasha Levin
2026-06-01 11:02 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260601110218.439979-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=jonathanh@nvidia.com \
--cc=stable@vger.kernel.org \
--cc=vkoul@kernel.org \
--cc=waynec@nvidia.com \
--cc=weichengc@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.