All of lore.kernel.org
 help / color / mirror / Atom feed
From: phucduc.bui@gmail.com
To: Srinivas Kandagatla <srini@kernel.org>, Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>,
	linux-sound@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH 8/9] ASoC: qdsp6: q6usb: Use guard() for mutex locks
Date: Wed,  3 Jun 2026 18:49:48 +0700	[thread overview]
Message-ID: <20260603114949.149595-9-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20260603114949.149595-1-phucduc.bui@gmail.com>

From: bui duc phuc <phucduc.bui@gmail.com>

Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.

Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---

NOTE: This patch is compile-tested only.

 sound/soc/qcom/qdsp6/q6usb.c | 28 ++++++++++------------------
 1 file changed, 10 insertions(+), 18 deletions(-)

diff --git a/sound/soc/qcom/qdsp6/q6usb.c b/sound/soc/qcom/qdsp6/q6usb.c
index 6381b289c55c..ee6de9635342 100644
--- a/sound/soc/qcom/qdsp6/q6usb.c
+++ b/sound/soc/qcom/qdsp6/q6usb.c
@@ -61,31 +61,28 @@ static int q6usb_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_usb_device *sdev;
 	int ret = -EINVAL;
 
-	mutex_lock(&data->mutex);
+	guard(mutex)(&data->mutex);
 
 	/* No active chip index */
 	if (list_empty(&data->devices))
-		goto out;
+		return ret;
 
 	sdev = list_last_entry(&data->devices, struct snd_soc_usb_device, list);
 
 	ret = snd_soc_usb_find_supported_format(sdev->chip_idx, params, direction);
 	if (ret < 0)
-		goto out;
+		return ret;
 
 	q6usb_afe = q6afe_port_get_from_id(cpu_dai->dev, USB_RX);
 	if (IS_ERR(q6usb_afe)) {
 		ret = PTR_ERR(q6usb_afe);
-		goto out;
+		return ret;
 	}
 
 	/* Notify audio DSP about the devices being offloaded */
 	ret = afe_port_send_usb_dev_param(q6usb_afe, sdev->card_idx,
 					  sdev->ppcm_idx[sdev->num_playback - 1]);
 
-out:
-	mutex_unlock(&data->mutex);
-
 	return ret;
 }
 
@@ -203,15 +200,14 @@ static int q6usb_update_offload_route(struct snd_soc_component *component, int c
 {
 	struct q6usb_port_data *data = dev_get_drvdata(component->dev);
 	struct snd_soc_usb_device *sdev;
-	int ret = 0;
 	int idx = -1;
 
-	mutex_lock(&data->mutex);
+	guard(mutex)(&data->mutex);
 
 	if (list_empty(&data->devices) ||
 	    direction == SNDRV_PCM_STREAM_CAPTURE) {
-		ret = -ENODEV;
-		goto out;
+		route[0] = idx;
+		return -ENODEV;
 	}
 
 	sdev = list_last_entry(&data->devices, struct snd_soc_usb_device, list);
@@ -227,11 +223,9 @@ static int q6usb_update_offload_route(struct snd_soc_component *component, int c
 				q6usb_get_pcm_id(component);
 	}
 
-out:
 	route[0] = idx;
-	mutex_unlock(&data->mutex);
 
-	return ret;
+	return 0;
 }
 
 static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb,
@@ -244,7 +238,7 @@ static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb,
 
 	data = dev_get_drvdata(usb->component->dev);
 
-	mutex_lock(&data->mutex);
+	guard(mutex)(&data->mutex);
 	if (connected) {
 		if (data->hs_jack)
 			snd_jack_report(data->hs_jack->jack, SND_JACK_USB);
@@ -257,7 +251,6 @@ static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb,
 		if (data->hs_jack)
 			snd_jack_report(data->hs_jack->jack, 0);
 	}
-	mutex_unlock(&data->mutex);
 
 	return 0;
 }
@@ -284,12 +277,11 @@ static int q6usb_component_set_jack(struct snd_soc_component *component,
 {
 	struct q6usb_port_data *data = dev_get_drvdata(component->dev);
 
-	mutex_lock(&data->mutex);
+	guard(mutex)(&data->mutex);
 	if (jack)
 		q6usb_component_enable_jack(data, jack);
 	else
 		q6usb_component_disable_jack(data);
-	mutex_unlock(&data->mutex);
 
 	return 0;
 }
-- 
2.43.0


  parent reply	other threads:[~2026-06-03 11:50 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-03 11:49 [PATCH 0/9] ASoC: qcom: Use guard() for mutex & spin locks phucduc.bui
2026-06-03 11:49 ` [PATCH 1/9] ASoC: qcom: audioreach: Use guard() for mutex locks phucduc.bui
2026-06-03 11:49 ` [PATCH 2/9] ASoc: qcom: q6adm: Use guard() for mutex & spin locks phucduc.bui
2026-06-03 11:49 ` [PATCH 3/9] ASoc: qcom: q6afe: Use guard() for mutex locks phucduc.bui
2026-06-03 11:49 ` [PATCH 4/9] ASoC: qcom: q6apm: " phucduc.bui
2026-06-03 11:49 ` [PATCH 5/9] ASoC: qcom: q6asm: Use guard() for mutex & spin locks phucduc.bui
2026-06-03 11:49 ` [PATCH 6/9] ASoC: qdsp6: q6core: Use guard() for mutex locks phucduc.bui
2026-06-03 11:49 ` [PATCH 7/9] ASoC: qdsp6: q6routing: " phucduc.bui
2026-06-03 11:49 ` phucduc.bui [this message]
2026-06-03 11:49 ` [PATCH 9/9] ASoC: qcom: topology: " phucduc.bui

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260603114949.149595-9-phucduc.bui@gmail.com \
    --to=phucduc.bui@gmail.com \
    --cc=broonie@kernel.org \
    --cc=krzysztof.kozlowski@oss.qualcomm.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=srini@kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.