From: sashiko-bot@kernel.org
To: "Dumitru Ceclan via B4 Relay"
<devnull+dumitru.ceclan.analog.com@kernel.org>
Cc: devicetree@vger.kernel.org, robh@kernel.org,
linux-media@vger.kernel.org, conor+dt@kernel.org
Subject: Re: [PATCH v13 02/22] dt-bindings: media: i2c: max96717: add support for I2C ATR
Date: Thu, 04 Jun 2026 14:31:24 +0000 [thread overview]
Message-ID: <20260604143125.207491F00893@smtp.kernel.org> (raw)
In-Reply-To: <20260604-gmsl2-3_serdes-v13-2-9d8a4919983b@analog.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] The `i2c-atr` node and its child nodes omit mandatory properties from their `required` lists and lack appropriate array constraints in the device tree bindings.
--
commit 92e28a019c543a99bd1f06cdc7c8d1709ad721cf
Author: Cosmin Tanislav <demonsingur@gmail.com>
dt-bindings: media: i2c: max96717: add support for I2C ATR
This commit adds support for I2C Address Translation (ATR) to the MAX96717
bindings, maintaining I2C gate support for compatibility.
> diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
> index d1e8ba6e368ec..976f6dd2c164c 100644
> --- a/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
> @@ -91,6 +91,30 @@ properties:
> incoming GMSL2 link. Therefore, it supports an i2c-gate
> subnode to configure a sensor.
>
> + i2c-alias-pool:
> + maxItems: 2
> +
> + i2c-atr:
> + type: object
> + additionalProperties: false
> +
> + properties:
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
[Severity: Medium]
Since the i2c-atr node acts as a bus container for child nodes with unit
addresses, should #address-cells and #size-cells be included in a required
list here to ensure they are always present?
> + patternProperties:
> + '^i2c@[01]$':
> + $ref: /schemas/i2c/i2c-controller.yaml#
> + unevaluatedProperties: false
> + properties:
> + reg:
> + items:
> + minimum: 0
> + maximum: 1
[Severity: Medium]
The child nodes define a reg property for their unit addresses, but they do
not specify it as mandatory.
Should there be a required list containing reg for the ^i2c@[01]$ nodes to
prevent them from silently passing validation without a unit address?
Additionally, the reg property applies items constraints but lacks a maxItems
limit.
Could this technically allow malformed arrays with multiple valid items
(like reg = <0 1>) to pass schema validation?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260604-gmsl2-3_serdes-v13-0-9d8a4919983b@analog.com?part=2
next prev parent reply other threads:[~2026-06-04 14:31 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-04 14:13 [PATCH v13 00/22] media: i2c: add Maxim GMSL2/3 serializer and deserializer drivers Dumitru Ceclan via B4 Relay
2026-06-04 14:13 ` Dumitru Ceclan
2026-06-04 14:13 ` [PATCH v13 01/22] media: mc: Add INTERNAL pad flag Dumitru Ceclan via B4 Relay
2026-06-04 14:13 ` Dumitru Ceclan
2026-06-04 14:29 ` sashiko-bot
2026-06-04 14:13 ` [PATCH v13 02/22] dt-bindings: media: i2c: max96717: add support for I2C ATR Dumitru Ceclan via B4 Relay
2026-06-04 14:13 ` Dumitru Ceclan
2026-06-04 14:31 ` sashiko-bot [this message]
2026-06-04 14:13 ` [PATCH v13 03/22] dt-bindings: media: i2c: max96717: add support for pinctrl/pinconf Dumitru Ceclan via B4 Relay
2026-06-04 14:13 ` Dumitru Ceclan
2026-06-04 14:13 ` [PATCH v13 04/22] dt-bindings: media: i2c: max96717: add support for MAX9295A Dumitru Ceclan via B4 Relay
2026-06-04 14:13 ` Dumitru Ceclan
2026-06-04 14:13 ` [PATCH v13 05/22] dt-bindings: media: i2c: max96717: add support for MAX96793 Dumitru Ceclan via B4 Relay
2026-06-04 14:13 ` Dumitru Ceclan
2026-06-04 14:13 ` [PATCH v13 06/22] dt-bindings: media: i2c: max96712: use pattern properties for ports Dumitru Ceclan via B4 Relay
2026-06-04 14:13 ` Dumitru Ceclan
2026-06-04 14:13 ` [PATCH v13 07/22] dt-bindings: media: i2c: max96712: add support for I2C ATR Dumitru Ceclan via B4 Relay
2026-06-04 14:13 ` Dumitru Ceclan
2026-06-04 14:30 ` sashiko-bot
2026-06-04 14:13 ` [PATCH v13 08/22] dt-bindings: media: i2c: max96712: add support for POC supplies Dumitru Ceclan via B4 Relay
2026-06-04 14:13 ` Dumitru Ceclan
2026-06-04 14:13 ` [PATCH v13 09/22] dt-bindings: media: i2c: max96712: add support for MAX96724F/R Dumitru Ceclan via B4 Relay
2026-06-04 14:13 ` Dumitru Ceclan
2026-06-04 14:13 ` [PATCH v13 10/22] dt-bindings: media: i2c: max96712: add control-channel-port property Dumitru Ceclan via B4 Relay
2026-06-04 14:13 ` Dumitru Ceclan
2026-06-04 14:29 ` sashiko-bot
2026-06-04 14:13 ` [PATCH v13 11/22] dt-bindings: media: i2c: max96714: add support for MAX96714R Dumitru Ceclan via B4 Relay
2026-06-04 14:13 ` Dumitru Ceclan
2026-06-04 14:13 ` [PATCH v13 12/22] dt-bindings: media: i2c: add MAX9296A, MAX96716A, MAX96792A Dumitru Ceclan via B4 Relay
2026-06-04 14:13 ` Dumitru Ceclan
2026-06-04 14:14 ` [PATCH v13 13/22] media: i2c: add Maxim GMSL2/3 serializer and deserializer framework Dumitru Ceclan via B4 Relay
2026-06-04 14:14 ` Dumitru Ceclan
2026-06-04 14:14 ` [PATCH v13 14/22] media: i2c: add Maxim GMSL2/3 serializer framework Dumitru Ceclan via B4 Relay
2026-06-04 14:14 ` Dumitru Ceclan
2026-06-04 14:33 ` sashiko-bot
2026-06-04 14:14 ` [PATCH v13 15/22] media: i2c: add Maxim GMSL2/3 deserializer framework Dumitru Ceclan via B4 Relay
2026-06-04 14:14 ` Dumitru Ceclan
2026-06-04 14:40 ` sashiko-bot
2026-06-04 14:14 ` [PATCH v13 16/22] media: i2c: maxim-serdes: add MAX96717 driver Dumitru Ceclan via B4 Relay
2026-06-04 14:14 ` Dumitru Ceclan
2026-06-04 14:41 ` sashiko-bot
2026-06-04 14:14 ` [PATCH v13 17/22] media: i2c: maxim-serdes: add MAX96724 driver Dumitru Ceclan via B4 Relay
2026-06-04 14:14 ` Dumitru Ceclan
2026-06-04 14:38 ` sashiko-bot
2026-06-04 14:14 ` [PATCH v13 18/22] media: i2c: maxim-serdes: add MAX9296A driver Dumitru Ceclan via B4 Relay
2026-06-04 14:14 ` Dumitru Ceclan
2026-06-04 14:40 ` sashiko-bot
2026-06-04 14:14 ` [PATCH v13 19/22] arm64: defconfig: disable deprecated MAX96712 driver Dumitru Ceclan via B4 Relay
2026-06-04 14:14 ` Dumitru Ceclan
2026-06-04 14:33 ` sashiko-bot
2026-06-04 14:14 ` [PATCH v13 20/22] staging: media: remove " Dumitru Ceclan via B4 Relay
2026-06-04 14:14 ` Dumitru Ceclan
2026-06-04 14:14 ` [PATCH v13 21/22] media: i2c: remove MAX96717 driver Dumitru Ceclan via B4 Relay
2026-06-04 14:14 ` Dumitru Ceclan
2026-06-04 14:14 ` [PATCH v13 22/22] media: i2c: remove MAX96714 driver Dumitru Ceclan via B4 Relay
2026-06-04 14:14 ` Dumitru Ceclan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260604143125.207491F00893@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=devnull+dumitru.ceclan.analog.com@kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.