All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Rodrigo Alencar <rodrigo.alencar@analog.com>,
	Stable@vger.kernel.org, Jonathan Cameron <jic23@kernel.org>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.1.y] iio: dac: ad5686: fix powerdown control on dual-channel devices
Date: Thu,  4 Jun 2026 12:50:59 -0400	[thread overview]
Message-ID: <20260604165100.3876351-1-sashal@kernel.org> (raw)
In-Reply-To: <2026060442-rink-repose-7887@gregkh>

From: Rodrigo Alencar <rodrigo.alencar@analog.com>

[ Upstream commit 8aeaf25a85263a7a43357e16ad78ab969f6f8aeb ]

Fix powerdown control by using a proper bit shift for the powerdown mask
values. During initialization, powerdown bits are initialized so that
unused bits are set to 1 and the correct bit shift is used. Dual-channel
devices use one-hot encoding in the address and that reflects on the
position of the powerdown bits, which are not channel-index based
for that case. Quad-channel devices also use one-hot encoding for the
channel address but the result of log2(address) coincides with the channel
index value. Mask as 0x3U is used rather than 0x3, because shift can reach
value of 30 (last channel of a 16-channel device), which would mess with
the sign bit. The issue was introduced when first adding support for
dual-channel devices, which overlooked powerdown control differences.

Fixes: 7dc8faeab3e3 ("iio: dac: ad5686: add support for AD5338R")
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/dac/ad5686.c | 46 +++++++++++++++++++++++++++++++---------
 1 file changed, 36 insertions(+), 10 deletions(-)

diff --git a/drivers/iio/dac/ad5686.c b/drivers/iio/dac/ad5686.c
index 7d1b2b83172de9..7e41fa03d72dec 100644
--- a/drivers/iio/dac/ad5686.c
+++ b/drivers/iio/dac/ad5686.c
@@ -25,22 +25,37 @@ static const char * const ad5686_powerdown_modes[] = {
 	"three_state"
 };
 
+static inline unsigned int ad5686_pd_mask_shift(const struct iio_chan_spec *chan)
+{
+	if (chan->channel == chan->address)
+		return chan->channel * 2;
+
+	/* one-hot encoding is used in dual/quad channel devices */
+	return __ffs(chan->address) * 2;
+}
+
 static int ad5686_get_powerdown_mode(struct iio_dev *indio_dev,
 				     const struct iio_chan_spec *chan)
 {
+	unsigned int shift = ad5686_pd_mask_shift(chan);
 	struct ad5686_state *st = iio_priv(indio_dev);
 
-	return ((st->pwr_down_mode >> (chan->channel * 2)) & 0x3) - 1;
+	guard(mutex)(&st->lock);
+
+	return ((st->pwr_down_mode >> shift) & 0x3U) - 1;
 }
 
 static int ad5686_set_powerdown_mode(struct iio_dev *indio_dev,
 				     const struct iio_chan_spec *chan,
 				     unsigned int mode)
 {
+	unsigned int shift = ad5686_pd_mask_shift(chan);
 	struct ad5686_state *st = iio_priv(indio_dev);
 
-	st->pwr_down_mode &= ~(0x3 << (chan->channel * 2));
-	st->pwr_down_mode |= ((mode + 1) << (chan->channel * 2));
+	guard(mutex)(&st->lock);
+
+	st->pwr_down_mode &= ~(0x3U << shift);
+	st->pwr_down_mode |= (mode + 1) << shift;
 
 	return 0;
 }
@@ -55,10 +70,12 @@ static const struct iio_enum ad5686_powerdown_mode_enum = {
 static ssize_t ad5686_read_dac_powerdown(struct iio_dev *indio_dev,
 		uintptr_t private, const struct iio_chan_spec *chan, char *buf)
 {
+	unsigned int shift = ad5686_pd_mask_shift(chan);
 	struct ad5686_state *st = iio_priv(indio_dev);
 
-	return sysfs_emit(buf, "%d\n", !!(st->pwr_down_mask &
-				       (0x3 << (chan->channel * 2))));
+	guard(mutex)(&st->lock);
+
+	return sysfs_emit(buf, "%d\n", !!(st->pwr_down_mask & (0x3U << shift)));
 }
 
 static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev,
@@ -78,9 +95,9 @@ static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev,
 		return ret;
 
 	if (readin)
-		st->pwr_down_mask |= (0x3 << (chan->channel * 2));
+		st->pwr_down_mask |= 0x3U << ad5686_pd_mask_shift(chan);
 	else
-		st->pwr_down_mask &= ~(0x3 << (chan->channel * 2));
+		st->pwr_down_mask &= ~(0x3U << ad5686_pd_mask_shift(chan));
 
 	switch (st->chip_info->regmap_type) {
 	case AD5310_REGMAP:
@@ -453,7 +470,7 @@ int ad5686_probe(struct device *dev,
 {
 	struct ad5686_state *st;
 	struct iio_dev *indio_dev;
-	unsigned int val, ref_bit_msk;
+	unsigned int val, ref_bit_msk, shift;
 	u8 cmd;
 	int ret, i, voltage_uv = 0;
 
@@ -488,9 +505,18 @@ int ad5686_probe(struct device *dev,
 	else
 		st->vref_mv = st->chip_info->int_vref_mv;
 
+	/* Initialize masks to all ones provided the max shift (last channel) */
+	shift = ad5686_pd_mask_shift(&st->chip_info->channels[st->chip_info->num_channels - 1]);
+	st->pwr_down_mask = GENMASK(shift + 1, 0);
+	st->pwr_down_mode = GENMASK(shift + 1, 0);
+
 	/* Set all the power down mode for all channels to 1K pulldown */
-	for (i = 0; i < st->chip_info->num_channels; i++)
-		st->pwr_down_mode |= (0x01 << (i * 2));
+	for (i = 0; i < st->chip_info->num_channels; i++) {
+		shift = ad5686_pd_mask_shift(&st->chip_info->channels[i]);
+		st->pwr_down_mask &= ~(0x3U << shift); /* powered up state */
+		st->pwr_down_mode &= ~(0x3U << shift);
+		st->pwr_down_mode |= 0x01U << shift;
+	}
 
 	indio_dev->name = name;
 	indio_dev->info = &ad5686_info;
-- 
2.53.0


      reply	other threads:[~2026-06-04 16:51 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-04  8:44 FAILED: patch "[PATCH] iio: dac: ad5686: fix powerdown control on dual-channel" failed to apply to 6.1-stable tree gregkh
2026-06-04 16:50 ` Sasha Levin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260604165100.3876351-1-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=jic23@kernel.org \
    --cc=rodrigo.alencar@analog.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.