All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: devnexen@gmail.com,Stable@vger.kernel.org,andriy.shevchenko@intel.com,jic23@kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] iio: adc: npcm: fix unbalanced clk_disable_unprepare()" failed to apply to 6.6-stable tree
Date: Thu, 04 Jun 2026 10:43:17 +0200	[thread overview]
Message-ID: <2026060417-editor-stylishly-7101@gregkh> (raw)


The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 0d42e2c0bd6ceb89e44c6e065f9bdf9b1df3ef0c
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026060417-editor-stylishly-7101@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 0d42e2c0bd6ceb89e44c6e065f9bdf9b1df3ef0c Mon Sep 17 00:00:00 2001
From: David Carlier <devnexen@gmail.com>
Date: Tue, 14 Apr 2026 13:30:06 +0100
Subject: [PATCH] iio: adc: npcm: fix unbalanced clk_disable_unprepare()

The driver acquired the ADC clock with devm_clk_get() and read its
rate, but never called clk_prepare_enable(). The probe error path and
npcm_adc_remove() both called clk_disable_unprepare() unconditionally,
causing the clk framework's enable/prepare counts to underflow on
probe failure or module unbind.

The issue went unnoticed because NPCM BMC firmware leaves the ADC
clock enabled at boot, so the driver happened to work in practice.

Switch to devm_clk_get_enabled() so the clock is properly enabled
during probe and automatically released by the device-managed
cleanup, and drop the now-redundant clk_disable_unprepare() from
both the probe error path and remove().

While at it, drop the duplicate error message on devm_request_irq()
failure since the IRQ core already logs it.

Fixes: 9bf85fbc9d8f ("iio: adc: add NPCM ADC driver")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c
index ddabb9600d46..61c8b825bda1 100644
--- a/drivers/iio/adc/npcm_adc.c
+++ b/drivers/iio/adc/npcm_adc.c
@@ -231,7 +231,7 @@ static int npcm_adc_probe(struct platform_device *pdev)
 	if (IS_ERR(info->reset))
 		return PTR_ERR(info->reset);
 
-	info->adc_clk = devm_clk_get(&pdev->dev, NULL);
+	info->adc_clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(info->adc_clk)) {
 		dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n");
 		return PTR_ERR(info->adc_clk);
@@ -244,17 +244,13 @@ static int npcm_adc_probe(struct platform_device *pdev)
 	info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * 2);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		ret = irq;
-		goto err_disable_clk;
-	}
+	if (irq < 0)
+		return irq;
 
 	ret = devm_request_irq(&pdev->dev, irq, npcm_adc_isr, 0,
 			       "NPCM_ADC", indio_dev);
-	if (ret < 0) {
-		dev_err(dev, "failed requesting interrupt\n");
-		goto err_disable_clk;
-	}
+	if (ret < 0)
+		return ret;
 
 	reg_con = ioread32(info->regs + NPCM_ADCCON);
 	info->vref = devm_regulator_get_optional(&pdev->dev, "vref");
@@ -262,7 +258,7 @@ static int npcm_adc_probe(struct platform_device *pdev)
 		ret = regulator_enable(info->vref);
 		if (ret) {
 			dev_err(&pdev->dev, "Can't enable ADC reference voltage\n");
-			goto err_disable_clk;
+			return ret;
 		}
 
 		iowrite32(reg_con & ~NPCM_ADCCON_REFSEL,
@@ -272,10 +268,8 @@ static int npcm_adc_probe(struct platform_device *pdev)
 		 * Any error which is not ENODEV indicates the regulator
 		 * has been specified and so is a failure case.
 		 */
-		if (PTR_ERR(info->vref) != -ENODEV) {
-			ret = PTR_ERR(info->vref);
-			goto err_disable_clk;
-		}
+		if (PTR_ERR(info->vref) != -ENODEV)
+			return PTR_ERR(info->vref);
 
 		/* Use internal reference */
 		iowrite32(reg_con | NPCM_ADCCON_REFSEL,
@@ -314,8 +308,6 @@ static int npcm_adc_probe(struct platform_device *pdev)
 	iowrite32(reg_con & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON);
 	if (!IS_ERR(info->vref))
 		regulator_disable(info->vref);
-err_disable_clk:
-	clk_disable_unprepare(info->adc_clk);
 
 	return ret;
 }
@@ -332,7 +324,6 @@ static void npcm_adc_remove(struct platform_device *pdev)
 	iowrite32(regtemp & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON);
 	if (!IS_ERR(info->vref))
 		regulator_disable(info->vref);
-	clk_disable_unprepare(info->adc_clk);
 }
 
 static struct platform_driver npcm_adc_driver = {


             reply	other threads:[~2026-06-04  8:44 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-04  8:43 gregkh [this message]
2026-06-04 11:25 ` [PATCH 6.6.y 1/2] iio: adc: npcm: Convert to platform remove callback returning void Sasha Levin
2026-06-04 11:25   ` [PATCH 6.6.y 2/2] iio: adc: npcm: fix unbalanced clk_disable_unprepare() Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2026060417-editor-stylishly-7101@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=Stable@vger.kernel.org \
    --cc=andriy.shevchenko@intel.com \
    --cc=devnexen@gmail.com \
    --cc=jic23@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.