All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Blasko <blasko@google.com>
To: stephen@networkplumber.org
Cc: dev@dpdk.org, joshwash@google.com, jtranoleary@google.com,
	 blasko@google.com
Subject: [PATCH v3 0/6] net/gve: add hardware timestamping support
Date: Fri,  5 Jun 2026 21:29:38 +0000	[thread overview]
Message-ID: <20260605213022.2770893-1-blasko@google.com> (raw)
In-Reply-To: <20260515231936.3296603-1-blasko@google.com>

This patch series introduces support for GVE hardware timestamping on DQO
queues. To support concurrent access, a mutex lock is introduced to protect
admin queue operations. A mechanism is then added to periodically synchronize
the NIC clock via AdminQ, and support is introduced for the read_clock ethdev
operation. Finally, the RX datapath is updated to reconstruct full 64-bit
timestamps from the 32-bit values in DQO descriptors.

---
v3:
- Patch 5:
  - Add mutex lock to protect shared NIC timestamp memzone access.
  - Fix missing read_clock assignment to DQO queue ops table
    (accidental omission in v2).

v2:
- Patch 1: Dropped ROBUST mutex attribute.
- Patch 3: Added adminq timestamp counter reset to gve_adminq_alloc.
- Patch 4:
  - Removed redundant void* casts.
  - Handled alarm reschedule failures by marking timestamp stale.
  - Added transient error logging on memzone allocation failure.
- Patch 5: Scoped read_clock ethdev operation strictly to DQO queues.
- Patch 6:
  - Scoped timestamp offload capability advertisement strictly to
    DQO queues.
  - Predicated capability advertisement directly on memzone
    allocation.
  - Initialized mbuf_timestamp_offset to -1.
  - Added blank line separating release notes.
---

Mark Blasko (6):
  net/gve: add thread safety to admin queue
  net/gve: add device option support for HW timestamps
  net/gve: add AdminQ command for NIC timestamps
  net/gve: add periodic NIC clock synchronization
  net/gve: support read clock ethdev op
  net/gve: reconstruct HW timestamps from DQO

 .mailmap                               |   1 +
 doc/guides/nics/features/gve.ini       |   1 +
 doc/guides/nics/gve.rst                |  20 ++++
 doc/guides/rel_notes/release_26_07.rst |   4 +
 drivers/net/gve/base/gve_adminq.c      | 128 +++++++++++++++++---
 drivers/net/gve/base/gve_adminq.h      |  29 +++++
 drivers/net/gve/base/gve_desc_dqo.h    |   8 +-
 drivers/net/gve/gve_ethdev.c           | 159 ++++++++++++++++++++++++-
 drivers/net/gve/gve_ethdev.h           |  40 +++++++
 drivers/net/gve/gve_rx_dqo.c           |  26 ++++
 10 files changed, 394 insertions(+), 22 deletions(-)

-- 
2.54.0.1032.g2f8565e1d1-goog


  parent reply	other threads:[~2026-06-05 21:30 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-11 22:43 [PATCH 0/6] net/gve: add hardware timestamping support mark-blasko
2026-05-11 22:43 ` [PATCH 1/6] net/gve: add thread safety to admin queue mark-blasko
2026-05-11 22:43 ` [PATCH 2/6] net/gve: add device option support for HW timestamps mark-blasko
2026-05-11 22:43 ` [PATCH 3/6] net/gve: add AdminQ command for NIC timestamps mark-blasko
2026-05-11 22:43 ` [PATCH 4/6] net/gve: add periodic NIC clock synchronization mark-blasko
2026-05-11 22:43 ` [PATCH 5/6] net/gve: support read clock ethdev op mark-blasko
2026-05-11 22:43 ` [PATCH 6/6] net/gve: reconstruct HW timestamps from DQO mark-blasko
2026-05-12  7:14 ` [PATCH 0/6] net/gve: add hardware timestamping support Stephen Hemminger
2026-05-15 23:19 ` [PATCH v2 " Mark Blasko
2026-05-15 23:19   ` [PATCH v2 1/6] net/gve: add thread safety to admin queue Mark Blasko
2026-05-15 23:19   ` [PATCH v2 2/6] net/gve: add device option support for HW timestamps Mark Blasko
2026-05-15 23:19   ` [PATCH v2 3/6] net/gve: add AdminQ command for NIC timestamps Mark Blasko
2026-05-15 23:19   ` [PATCH v2 4/6] net/gve: add periodic NIC clock synchronization Mark Blasko
2026-05-15 23:19   ` [PATCH v2 5/6] net/gve: support read clock ethdev op Mark Blasko
2026-05-15 23:19   ` [PATCH v2 6/6] net/gve: reconstruct HW timestamps from DQO Mark Blasko
2026-05-17 23:15   ` [PATCH v2 0/6] net/gve: add hardware timestamping support Stephen Hemminger
2026-05-18 18:43     ` Mark Blasko
2026-05-21 16:10       ` Joshua Washington
2026-06-05 21:29   ` Mark Blasko [this message]
2026-06-05 21:29     ` [PATCH v3 1/6] net/gve: add thread safety to admin queue Mark Blasko
2026-06-05 21:29     ` [PATCH v3 2/6] net/gve: add device option support for HW timestamps Mark Blasko
2026-06-05 21:29     ` [PATCH v3 3/6] net/gve: add AdminQ command for NIC timestamps Mark Blasko
2026-06-05 21:29     ` [PATCH v3 4/6] net/gve: add periodic NIC clock synchronization Mark Blasko
2026-06-05 21:29     ` [PATCH v3 5/6] net/gve: support read clock ethdev op Mark Blasko
2026-06-05 21:29     ` [PATCH v3 6/6] net/gve: reconstruct HW timestamps from DQO Mark Blasko
2026-06-13  4:22     ` [PATCH v4 0/6] net/gve: add hardware timestamping support Mark Blasko
2026-06-13  4:22       ` [PATCH v4 1/6] net/gve: add thread safety to admin queue Mark Blasko
2026-06-13  4:22       ` [PATCH v4 2/6] net/gve: add device option support for HW timestamps Mark Blasko
2026-06-13  4:22       ` [PATCH v4 3/6] net/gve: add AdminQ command for NIC timestamps Mark Blasko
2026-06-13  4:22       ` [PATCH v4 4/6] net/gve: add periodic NIC clock synchronization Mark Blasko
2026-06-13  4:22       ` [PATCH v4 5/6] net/gve: support read clock ethdev op Mark Blasko
2026-06-13  4:22       ` [PATCH v4 6/6] net/gve: reconstruct HW timestamps from DQO Mark Blasko
2026-06-15 18:53       ` [PATCH v4 0/6] net/gve: add hardware timestamping support Stephen Hemminger
2026-06-15 21:01         ` Mark Blasko
2026-06-15 21:29           ` Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260605213022.2770893-1-blasko@google.com \
    --to=blasko@google.com \
    --cc=dev@dpdk.org \
    --cc=joshwash@google.com \
    --cc=jtranoleary@google.com \
    --cc=stephen@networkplumber.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.