All of lore.kernel.org
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Nathan Lynch via B4 Relay" <devnull+nathan.lynch.amd.com@kernel.org>
Cc: linux-pci@vger.kernel.org, vkoul@kernel.org,
	dmaengine@vger.kernel.org, Frank.Li@kernel.org
Subject: Re: [PATCH v3 20/23] dmaengine: sdxi: Encode nop, copy, and interrupt descriptors
Date: Sat, 06 Jun 2026 00:20:39 +0000	[thread overview]
Message-ID: <20260606002039.7594D1F00893@smtp.kernel.org> (raw)
In-Reply-To: <20260605-sdxi-base-v3-20-4d38ca2bdffe@amd.com>

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] Use of WARN_ON_ONCE() for normal input validation leading to potential DoS, and subsequent dead clamp_val() code.
--

commit 7911601fb1520af0d6b7d063a371eaff05507d92
Author: Nathan Lynch <nathan.lynch@amd.com>

dmaengine: sdxi: Encode nop, copy, and interrupt descriptors

This commit introduces low-level support for serializing nop, copy, and
interrupt operations to the descriptor ring of an SDXI client context.

> diff --git a/drivers/dma/sdxi/descriptor.c b/drivers/dma/sdxi/descriptor.c
> --- a/drivers/dma/sdxi/descriptor.c
> +++ b/drivers/dma/sdxi/descriptor.c
[ ... ]
> @@ -7,12 +7,119 @@
>  
>  #include <kunit/visibility.h>
>  #include <linux/bitfield.h>
> +#include <linux/bug.h>
> +#include <linux/range.h>
> +#include <linux/sizes.h>
>  #include <linux/types.h>
>  #include <asm/byteorder.h>
>  
>  #include "hw.h"
>  #include "descriptor.h"
>  
> +VISIBLE_IF_KUNIT int __must_check sdxi_encode_size32(u64 size, __le32 *dest)
> +{
> +	/*
> +	 * sizes are encoded as value - 1:
> +	 * value    encoding
> +	 *     1           0
> +	 *     2           1
> +	 *   ...
> +	 *    4G  0xffffffff
> +	 */
> +	if (WARN_ON_ONCE(size > SZ_4G) ||
> +	    WARN_ON_ONCE(size == 0))
> +		return -EINVAL;

[Severity: Medium]
Is WARN_ON_ONCE() appropriate for input validation here?

Since dmaengine_prep_dma_memcpy() doesn't filter out 0 or sizes greater
than 4GB before calling the driver, requesting an unsupported transfer size
will trigger a stack dump, and potentially a system crash if panic_on_warn
is enabled.

> +	size = clamp_val(size, 1, SZ_4G);

Also, since the condition above returns -EINVAL for out-of-bounds sizes,
is this clamp_val() call unreachable dead code?

> +	*dest = cpu_to_le32((u32)(size - 1));
> +	return 0;
> +}
> +EXPORT_SYMBOL_IF_KUNIT(sdxi_encode_size32);

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260605-sdxi-base-v3-0-4d38ca2bdffe@amd.com?part=20

  reply	other threads:[~2026-06-06  0:20 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-06  0:02 [PATCH v3 00/23] dmaengine: Smart Data Accelerator Interface (SDXI) basic support Nathan Lynch via B4 Relay
2026-06-06  0:02 ` Nathan Lynch
2026-06-06  0:02 ` [PATCH v3 01/23] PCI: Add SNIA SDXI accelerator sub-class Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:02 ` [PATCH v3 02/23] MAINTAINERS: Add entry for SDXI driver Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:02 ` [PATCH v3 03/23] dmaengine: sdxi: Add PCI initialization Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:02 ` [PATCH v3 04/23] dmaengine: sdxi: Feature discovery and initial configuration Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:14   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 05/23] dmaengine: sdxi: Configure context tables Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:02 ` [PATCH v3 06/23] dmaengine: sdxi: Allocate DMA pools Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:15   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 07/23] dmaengine: sdxi: Allocate administrative context Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:02 ` [PATCH v3 08/23] dmaengine: sdxi: Install " Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:26   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 09/23] dmaengine: sdxi: Start functions on probe, stop on remove Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:14   ` sashiko-bot
2026-06-09 19:55   ` Tycho Andersen
2026-06-06  0:02 ` [PATCH v3 10/23] dmaengine: sdxi: Complete administrative context jump start Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:12   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 11/23] dmaengine: sdxi: Add client context alloc and release APIs Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:22   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 12/23] dmaengine: sdxi: Add descriptor ring management Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:19   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 13/23] dmaengine: sdxi: Add unit tests for descriptor ring reservations Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:16   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 14/23] dmaengine: sdxi: Attach descriptor ring state to contexts Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:24   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 15/23] dmaengine: sdxi: Per-context access key (AKey) table entry allocator Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:20   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 16/23] dmaengine: sdxi: Generic descriptor manipulation helpers Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:02 ` [PATCH v3 17/23] dmaengine: sdxi: Add completion status block API Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:21   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 18/23] dmaengine: sdxi: Encode context start, stop, and sync descriptors Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:02 ` [PATCH v3 19/23] dmaengine: sdxi: Provide context start and stop APIs Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:22   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 20/23] dmaengine: sdxi: Encode nop, copy, and interrupt descriptors Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:20   ` sashiko-bot [this message]
2026-06-06  0:02 ` [PATCH v3 21/23] dmaengine: sdxi: Add unit tests for descriptor encoding Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:26   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 22/23] dmaengine: sdxi: MSI/MSI-X vector allocation and mapping Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:31   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 23/23] dmaengine: sdxi: Add DMA engine provider Nathan Lynch via B4 Relay
2026-06-06  0:02   ` Nathan Lynch
2026-06-06  0:33   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260606002039.7594D1F00893@smtp.kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=Frank.Li@kernel.org \
    --cc=devnull+nathan.lynch.amd.com@kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.