From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.1.y 2/3] tty: serial: qcom-geni-serial: align #define values
Date: Fri, 5 Jun 2026 22:47:08 -0400 [thread overview]
Message-ID: <20260606024709.2514691-2-sashal@kernel.org> (raw)
In-Reply-To: <20260606024709.2514691-1-sashal@kernel.org>
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
[ Upstream commit 6cde11dbf4b65170eeefba48df730c93d75e01a3 ]
Keep the #define symbols aligned for better readability.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221229155030.418800-5-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: ca2584d841b6 ("serial: qcom-geni: fix UART_RX_PAR_EN bit position")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/qcom_geni_serial.c | 62 +++++++++++++--------------
1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 0dba8106792954..b7579da9af9d98 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -39,57 +39,57 @@
#define SE_UART_MANUAL_RFR 0x2ac
/* SE_UART_TRANS_CFG */
-#define UART_TX_PAR_EN BIT(0)
-#define UART_CTS_MASK BIT(1)
+#define UART_TX_PAR_EN BIT(0)
+#define UART_CTS_MASK BIT(1)
/* SE_UART_TX_STOP_BIT_LEN */
-#define TX_STOP_BIT_LEN_1 0
-#define TX_STOP_BIT_LEN_2 2
+#define TX_STOP_BIT_LEN_1 0
+#define TX_STOP_BIT_LEN_2 2
/* SE_UART_RX_TRANS_CFG */
-#define UART_RX_PAR_EN BIT(3)
+#define UART_RX_PAR_EN BIT(3)
/* SE_UART_RX_WORD_LEN */
-#define RX_WORD_LEN_MASK GENMASK(9, 0)
+#define RX_WORD_LEN_MASK GENMASK(9, 0)
/* SE_UART_RX_STALE_CNT */
-#define RX_STALE_CNT GENMASK(23, 0)
+#define RX_STALE_CNT GENMASK(23, 0)
/* SE_UART_TX_PARITY_CFG/RX_PARITY_CFG */
-#define PAR_CALC_EN BIT(0)
-#define PAR_EVEN 0x00
-#define PAR_ODD 0x01
-#define PAR_SPACE 0x10
+#define PAR_CALC_EN BIT(0)
+#define PAR_EVEN 0x00
+#define PAR_ODD 0x01
+#define PAR_SPACE 0x10
/* SE_UART_MANUAL_RFR register fields */
-#define UART_MANUAL_RFR_EN BIT(31)
-#define UART_RFR_NOT_READY BIT(1)
-#define UART_RFR_READY BIT(0)
+#define UART_MANUAL_RFR_EN BIT(31)
+#define UART_RFR_NOT_READY BIT(1)
+#define UART_RFR_READY BIT(0)
/* UART M_CMD OP codes */
-#define UART_START_TX 0x1
+#define UART_START_TX 0x1
/* UART S_CMD OP codes */
-#define UART_START_READ 0x1
-
-#define UART_OVERSAMPLING 32
-#define STALE_TIMEOUT 16
-#define DEFAULT_BITS_PER_CHAR 10
-#define GENI_UART_CONS_PORTS 1
-#define GENI_UART_PORTS 3
-#define DEF_FIFO_DEPTH_WORDS 16
-#define DEF_TX_WM 2
-#define DEF_FIFO_WIDTH_BITS 32
-#define UART_RX_WM 2
+#define UART_START_READ 0x1
+
+#define UART_OVERSAMPLING 32
+#define STALE_TIMEOUT 16
+#define DEFAULT_BITS_PER_CHAR 10
+#define GENI_UART_CONS_PORTS 1
+#define GENI_UART_PORTS 3
+#define DEF_FIFO_DEPTH_WORDS 16
+#define DEF_TX_WM 2
+#define DEF_FIFO_WIDTH_BITS 32
+#define UART_RX_WM 2
/* SE_UART_LOOPBACK_CFG */
-#define RX_TX_SORTED BIT(0)
-#define CTS_RTS_SORTED BIT(1)
-#define RX_TX_CTS_RTS_SORTED (RX_TX_SORTED | CTS_RTS_SORTED)
+#define RX_TX_SORTED BIT(0)
+#define CTS_RTS_SORTED BIT(1)
+#define RX_TX_CTS_RTS_SORTED (RX_TX_SORTED | CTS_RTS_SORTED)
/* UART pin swap value */
-#define DEFAULT_IO_MACRO_IO0_IO1_MASK GENMASK(3, 0)
+#define DEFAULT_IO_MACRO_IO0_IO1_MASK GENMASK(3, 0)
#define IO_MACRO_IO0_SEL 0x3
-#define DEFAULT_IO_MACRO_IO2_IO3_MASK GENMASK(15, 4)
+#define DEFAULT_IO_MACRO_IO2_IO3_MASK GENMASK(15, 4)
#define IO_MACRO_IO2_IO3_SWAP 0x4640
/* We always configure 4 bytes per FIFO word */
--
2.53.0
next prev parent reply other threads:[~2026-06-06 2:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-04 10:52 FAILED: patch "[PATCH] serial: qcom-geni: fix UART_RX_PAR_EN bit position" failed to apply to 6.1-stable tree gregkh
2026-06-06 2:47 ` [PATCH 6.1.y 1/3] tty: serial: qcom-geni-serial: remove unused symbols Sasha Levin
2026-06-06 2:47 ` Sasha Levin [this message]
2026-06-06 2:47 ` [PATCH 6.1.y 3/3] serial: qcom-geni: fix UART_RX_PAR_EN bit position Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260606024709.2514691-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=bartosz.golaszewski@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=konrad.dybcio@linaro.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.