All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rosen Penev <rosenp@gmail.com>
To: linux-watchdog@vger.kernel.org
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Claudiu Beznea <claudiu.beznea@tuxon.dev>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	linux-arm-kernel@lists.infradead.org (moderated
	list:ARM/Microchip (AT91) SoC support),
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCHv2 1/3] watchdog: sama5d4: fix shared IRQ and hardcoded timeout issues
Date: Mon,  8 Jun 2026 13:09:31 -0700	[thread overview]
Message-ID: <20260608200933.18669-2-rosenp@gmail.com> (raw)
In-Reply-To: <20260608200933.18669-1-rosenp@gmail.com>

Fix three pre-existing issues in the sama5d4 watchdog driver:

1. Unsafe IRQF_SHARED | IRQF_NO_SUSPEND combination: The watchdog
   interrupt is a dedicated peripheral line, not shared with other
   devices.

2. Unconditional IRQ_HANDLED on shared line: The handler returned
   IRQ_HANDLED even when the status register indicated no watchdog
   interrupt was pending.  Return IRQ_NONE in that case so the kernel
   can properly detect spurious interrupts on the line.

3. Hardcoded 16-second timeout: sama5d4_wdt_init() unconditionally
   used WDT_DEFAULT_TIMEOUT (16s) for the hardware timeout, ignoring
   any timeout configured via device tree (watchdog_init_timeout) or
   userspace.  Pass wdd->timeout to sama5d4_wdt_init() so the
   configured timeout is honored during probe and resume.

Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/watchdog/sama5d4_wdt.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/watchdog/sama5d4_wdt.c b/drivers/watchdog/sama5d4_wdt.c
index 704b786cc2ec..f74f1e8956b5 100644
--- a/drivers/watchdog/sama5d4_wdt.c
+++ b/drivers/watchdog/sama5d4_wdt.c
@@ -169,11 +169,12 @@ static irqreturn_t sama5d4_wdt_irq_handler(int irq, void *dev_id)
 	else
 		reg = wdt_read(wdt, AT91_WDT_SR);
 
-	if (reg) {
-		pr_crit("Atmel Watchdog Software Reset\n");
-		emergency_restart();
-		pr_crit("Reboot didn't succeed\n");
-	}
+	if (!reg)
+		return IRQ_NONE;
+
+	pr_crit("Atmel Watchdog Software Reset\n");
+	emergency_restart();
+	pr_crit("Reboot didn't succeed\n");
 
 	return IRQ_HANDLED;
 }
@@ -197,11 +198,11 @@ static int of_sama5d4_wdt_init(struct device_node *np, struct sama5d4_wdt *wdt)
 	return 0;
 }
 
-static int sama5d4_wdt_init(struct sama5d4_wdt *wdt)
+static int sama5d4_wdt_init(struct sama5d4_wdt *wdt, unsigned int timeout)
 {
 	u32 reg, val;
 
-	val = WDT_SEC2TICKS(WDT_DEFAULT_TIMEOUT);
+	val = WDT_SEC2TICKS(timeout);
 	/*
 	 * When booting and resuming, the bootloader may have changed the
 	 * watchdog configuration.
@@ -305,7 +306,7 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
 		set_bit(WDOG_HW_RUNNING, &wdd->status);
 	}
 
-	ret = sama5d4_wdt_init(wdt);
+	ret = sama5d4_wdt_init(wdt, wdd->timeout);
 	if (ret)
 		return ret;
 
@@ -358,7 +359,7 @@ static int sama5d4_wdt_resume_early(struct device *dev)
 	 * This should only be done when the registers are lost on suspend but
 	 * there is no way to get this information right now.
 	 */
-	sama5d4_wdt_init(wdt);
+	sama5d4_wdt_init(wdt, wdt->wdd.timeout);
 
 	if (watchdog_active(&wdt->wdd))
 		sama5d4_wdt_start(&wdt->wdd);
-- 
2.54.0


  reply	other threads:[~2026-06-08 20:09 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-08 20:09 [PATCHv2 0/3] watchdog: sama5d4: fix IRQ and timeout bugs, use platform_get_irq_optional Rosen Penev
2026-06-08 20:09 ` Rosen Penev [this message]
2026-06-08 20:22   ` [PATCHv2 1/3] watchdog: sama5d4: fix shared IRQ and hardcoded timeout issues sashiko-bot
2026-06-08 22:35   ` Guenter Roeck
2026-06-08 20:09 ` [PATCHv2 2/3] watchdog: sama5d4: use platform_get_irq_optional() Rosen Penev
2026-06-08 20:16   ` sashiko-bot
2026-06-08 22:44   ` Guenter Roeck
2026-06-08 20:09 ` [PATCHv2 3/3] watchdog: sama5d4: fix NULL deref in irq handler Rosen Penev
2026-06-08 20:20   ` sashiko-bot
2026-06-08 20:38 ` [PATCHv2 0/3] watchdog: sama5d4: fix IRQ and timeout bugs, use platform_get_irq_optional Nicolas Ferre
2026-06-08 20:42   ` Rosen Penev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260608200933.18669-2-rosenp@gmail.com \
    --to=rosenp@gmail.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=claudiu.beznea@tuxon.dev \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=nicolas.ferre@microchip.com \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.