From: sashiko-bot@kernel.org
To: "Jörg Rödel" <joro@8bytes.org>
Cc: kvm@vger.kernel.org
Subject: Re: [PATCH 58/60] kvm: svm: Invoke a specified VMPL level VMSA for the vCPU
Date: Mon, 08 Jun 2026 23:21:39 +0000 [thread overview]
Message-ID: <20260608232139.61E8F1F00893@smtp.kernel.org> (raw)
In-Reply-To: <20260608144252.351443-59-joro@8bytes.org>
Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
- [High] The MSR protocol handler for GHCB_MSR_VMPL_REQ propagates `-EINVAL` to KVM_RUN when a requested VMPL plane does not exist, causing the VM to crash.
- [High] Requesting a switch to the currently active VMPL puts the active vCPU plane into the STOPPED state, permanently hanging the vCPU thread.
- [High] Missing array_index_nospec() on guest-controlled VMPL index creates a Spectre v1 vulnerability.
--
commit 13abcdff43b65b23c1d479626cab3e83b513a2c8
Author: Tom Lendacky <thomas.lendacky@amd.com>
kvm: svm: Invoke a specified VMPL level VMSA for the vCPU
Implement the SNP Run VMPL NAE event and MSR protocol to allow a guest to
request a different VMPL level VMSA be run for the vCPU. This allows the
guest to "call" an SVSM to process an SVSM request.
> diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
> index 0b531eda062f3..70a06769a4100 100644
> --- a/arch/x86/kvm/svm/sev.c
> +++ b/arch/x86/kvm/svm/sev.c
[ ... ]
> @@ -4573,6 +4577,45 @@ static void sev_get_apic_ids(struct vcpu_svm *svm)
> kvfree(desc);
> }
>
> +static int __sev_snp_run_vmpl(struct vcpu_svm *svm, unsigned int vmpl)
> +{
> + struct kvm_vcpu *vcpu = &svm->vcpu;
> + struct kvm_vcpu *target = vcpu->common->vcpus[vmpl];
> + struct vcpu_svm *target_svm = to_svm(target);
> +
> + if (!target)
> + return -EINVAL;
> +
> + /* Mark current plane as stopped so it is not selected */
> + kvm_set_mp_state(target, KVM_MP_STATE_RUNNABLE);
> + /* In case KVM_REQ_UPDATE_PROTECTED_GUEST_STATE is set - mark the new VMSA as runnable */
> + target_svm->sev_es.snp_ap_runnable = true;
> + kvm_vcpu_set_plane_runnable(target);
> + kvm_vcpu_set_plane_stopped(vcpu);
[Severity: High]
If a guest requests a switch to the VMPL level it is already executing on,
target and vcpu will point to the same object. Will this sequence
cause the vCPU to hang?
Since kvm_vcpu_set_plane_runnable(target) is immediately followed by
kvm_vcpu_set_plane_stopped(vcpu), the plane's state would be overwritten
to STOPPED, indefinitely suspending the vCPU.
Should there be an explicit check for target == vcpu to handle this?
> +
> + kvm_make_request(KVM_REQ_PLANE_RESCHED, vcpu);
> +
> + return 1;
> +}
> +
> +static int sev_snp_run_vmpl(struct vcpu_svm *svm)
> +{
> + struct ghcb *ghcb = svm->sev_es.ghcb;
> + struct kvm_vcpu *vcpu = &svm->vcpu;
> + unsigned int vmpl;
> +
> + vmpl = lower_32_bits(svm->vmcb->control.exit_info_1);
> + if (vmpl >= SVM_SEV_VMPL_MAX) {
> + vcpu_unimpl(vcpu, "vmgexit: invalid VMPL level [%u] from guest\n", vmpl);
> + return -EINVAL;
> + }
[Severity: High]
Since vmpl is guest-controlled and used as an index into the
vcpu->common->vcpus[vmpl] array in __sev_snp_run_vmpl(), is there a risk
of speculative out-of-bounds execution here?
Should vmpl be sanitized with array_index_nospec() after this bounds
check to prevent a potential Spectre v1 vulnerability?
> +
> + ghcb_set_sw_exit_info_1(ghcb, 0);
> + ghcb_set_sw_exit_info_2(ghcb, 0);
> +
> + return __sev_snp_run_vmpl(svm, vmpl);
> +}
> +
[ ... ]
> @@ -4684,6 +4727,27 @@ static int sev_handle_vmgexit_msr_protocol(struct vcpu_svm *svm)
>
> ret = snp_begin_psc_msr(svm, control->ghcb_gpa);
> break;
> + case GHCB_MSR_VMPL_REQ: {
> + unsigned int vmpl;
> +
> + if (!sev_snp_guest(vcpu->kvm))
> + goto out_terminate;
> +
> + vmpl = get_ghcb_msr_bits(svm, GHCB_MSR_VMPL_LEVEL_MASK, GHCB_MSR_VMPL_LEVEL_POS);
> +
> + set_ghcb_msr_bits(svm, 0, GHCB_MSR_VMPL_ERROR_MASK, GHCB_MSR_VMPL_ERROR_POS);
> + set_ghcb_msr_bits(svm, 0, GHCB_MSR_VMPL_RSVD_MASK, GHCB_MSR_VMPL_RSVD_POS);
> + set_ghcb_msr_bits(svm, GHCB_MSR_VMPL_RESP, GHCB_MSR_INFO_MASK, GHCB_MSR_INFO_POS);
> +
> + if (vmpl >= SVM_SEV_VMPL_MAX) {
> + vcpu_unimpl(vcpu, "vmgexit: invalid VMPL level [%u] from guest\n", vmpl);
> + set_ghcb_msr_bits(svm, 1, GHCB_MSR_VMPL_ERROR_MASK, GHCB_MSR_VMPL_ERROR_POS);
> + break;
> + }
[Severity: High]
Similar to sev_snp_run_vmpl(), does this guest-controlled vmpl index require
array_index_nospec() after the bounds check to mitigate Spectre v1?
> +
> + ret = __sev_snp_run_vmpl(svm, vmpl);
> + break;
[Severity: High]
If target == NULL inside __sev_snp_run_vmpl(), it returns -EINVAL which
is then assigned to ret here and propagated up. Will this cause the
KVM_RUN ioctl to return -EINVAL to userspace?
Since QEMU treats negative returns from KVM_RUN as fatal errors and aborts
the VM, could a less privileged guest level (e.g., VMPL3) exploit this to
intentionally crash the VM and disrupt more privileged levels?
Should the MSR handler trap the negative return, set GHCB_MSR_VMPL_ERROR_MASK
in the response, and return 1 to safely resume the guest instead?
> + }
> case GHCB_MSR_TERM_REQ: {
> u64 reason_set, reason_code;
>
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260608144252.351443-1-joro@8bytes.org?part=58
next prev parent reply other threads:[~2026-06-08 23:21 UTC|newest]
Thread overview: 174+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-08 14:41 [PATCH 00/60] KVM Planes + SEV-SNP Support Jörg Rödel
2026-06-08 14:41 ` Jörg Rödel
2026-06-08 14:41 ` [PATCH 01/60] x86/sev: Define the #HV doorbell page structure Jörg Rödel
2026-06-08 14:41 ` Jörg Rödel
2026-06-08 14:41 ` [PATCH 02/60] KVM: SVM: Add support for the SEV-SNP #HV doorbell page NAE event Jörg Rödel
2026-06-08 14:41 ` Jörg Rödel
2026-06-08 15:09 ` sashiko-bot
2026-06-08 14:41 ` [PATCH 03/60] KVM: SVM: Inject #HV when Restricted Injection is active Jörg Rödel
2026-06-08 14:41 ` Jörg Rödel
2026-06-08 15:12 ` sashiko-bot
2026-06-08 14:41 ` [PATCH 04/60] KVM: SVM: Inject NMIs " Jörg Rödel
2026-06-08 14:41 ` Jörg Rödel
2026-06-08 15:15 ` sashiko-bot
2026-06-08 14:41 ` [PATCH 05/60] KVM: SVM: Inject MCEs " Jörg Rödel
2026-06-08 14:41 ` Jörg Rödel
2026-06-08 15:28 ` sashiko-bot
2026-06-08 14:41 ` [PATCH 06/60] KVM: SVM: Enable Restricted Injection for an SEV-SNP guest Jörg Rödel
2026-06-08 14:41 ` Jörg Rödel
2026-06-08 15:38 ` sashiko-bot
2026-06-08 14:41 ` [PATCH 07/60] KVM: SVM: Add support for the SEV-SNP #HV IPI NAE event Jörg Rödel
2026-06-08 14:41 ` Jörg Rödel
2026-06-08 15:24 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 08/60] Documentation: kvm: introduce "VM plane" concept Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 15:29 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 09/60] kvm: Introduce struct kvm_plane Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 14:42 ` [PATCH 10/60] kvm: Move vcpu_array to " Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 14:42 ` [PATCH 11/60] kvm: Introduce struct kvm_vcpu_common Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 14:42 ` [PATCH 12/60] kvm: Move vcpu accounting to " Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 15:52 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 13/60] kvm: Add read accessors for kvm_vcpu scheduling state Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 15:56 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 14/60] kvm: Make kvm_running_vcpus point to struct kvm_vcpu_common Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 15:51 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 15/60] kvm: Move VCPU scheduling state " Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 16:07 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 16/60] kvm: Add accessors for kvm_vcpu->mutex Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 14:42 ` [PATCH 17/60] kvm: Move VCPU locking to struct kvm_vcpu_common Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 16:12 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 18/60] kvm: Move kvm_vcpu->rcuwait " Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 16:26 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 19/60] kvm: Introduce accessors for kvm_vcpu->mode Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 16:16 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 20/60] kvm: Move kvm_vcpu mode and requests field to struct kvm_vcpu_common Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 16:37 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 21/60] kvm: Introduce per-plane VCPU requests Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 16:33 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 22/60] kvm: Move kvm_vcpu pid members to struct kvm_vcpu_common Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 14:42 ` [PATCH 23/60] kvm: Move kvm_vcpu sigset " Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 16:49 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 24/60] kvm: Move kvm_vcpu spinloop " Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 16:50 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 25/60] kvm: Move kvm_vcpu->dirty_ring " Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 17:01 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 26/60] kvm: Introduce arch-specific plane state Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 14:42 ` [PATCH 27/60] kvm: Introduce arch-specific part of struct kvm_vcpu_common Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 14:42 ` [PATCH 28/60] kvm: Implement KVM_CAP_PLANES Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 17:29 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 29/60] kvm: Implement KVM_CREATE_PLANE ioctl Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 17:13 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 30/60] kvm: Add KVM_EXIT_PLANE_EVENT Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 17:36 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 31/60] kvm: Allocate struct kvm_plane in architecture code Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 14:42 ` [PATCH 32/60] kvm: Allocate struct kvm_run only for struct kvm_vcpu_common Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 17:53 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 33/60] KVM: Implement KVM_CREATE_VCPU ioctl for planes Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 18:13 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 34/60] kvm: Keep track of plane VCPUs in struct kvm_vcpu_common Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 18:24 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 35/60] kvm: Add VCPU plane-scheduling state and helpers Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 16:47 ` Paolo Bonzini
2026-06-08 16:47 ` Paolo Bonzini
2026-06-08 17:52 ` Jörg Rödel
2026-06-08 17:52 ` Jörg Rödel
2026-06-08 17:58 ` Paolo Bonzini
2026-06-08 17:58 ` Paolo Bonzini
2026-06-08 18:35 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 36/60] kvm: Add plane_level to kvm_kernel_irq_routing_entry Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 14:42 ` [PATCH 37/60] kvm: Pass plane_level to kvm_set_routing_entry() Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 18:58 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 38/60] kvm: Make KVM_SIGNAL_MSI per plane Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 19:13 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 39/60] kvm: Make KVM_SET_GSI_ROUTING " Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 19:23 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 40/60] kvm: x86: Handle IOAPIC EOIs " Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 19:37 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 41/60] kvm: x86: Make apic_map " Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 19:49 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 42/60] kvm: x86: Make local APIC code aware of planes Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 20:03 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 43/60] kvm: x86: Move CPUID state to struct kvm_vcpu_arch_common Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 20:17 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 44/60] kvm: x86: Move cpu_caps " Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 20:35 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 45/60] kvm: x86: Update state for all plane VCPUs after CPUID update Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 20:48 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 46/60] kvm: x86: Share MTRR state across planes Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 14:42 ` [PATCH 47/60] kvm: x86: Select a plane to run Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 21:14 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 48/60] kvm: x86: Make event injection VCPU requests per-plane Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 21:22 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 49/60] kvm: x86: Allow hardware backend to overwrite struct kvm_plane allocation Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 14:42 ` [PATCH 50/60] kvm: x86: Make KVM_REQ_UPDATE_PROTECTED_GUEST_STATE per plane Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 21:44 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 51/60] kvm: x86: Share pio_data across planes Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 14:42 ` [PATCH 52/60] kvm: x86: Switch to plane0 if it has events Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 22:10 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 53/60] kvm: x86: Introduce max_planes x86-op Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 14:42 ` [PATCH 54/60] kvm: x86: Restrict KVM planes support to KVM_IRQCHIP_SPLIT Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 22:32 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 55/60] kvm: svm: Track vmsa_features per plane Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 22:45 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 56/60] kvm: svm: Implement GET_AP_APIC_IDS NAE event Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 22:57 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 57/60] kvm: sev: Allow for VMPL level specification in AP create Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 23:08 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 58/60] kvm: svm: Invoke a specified VMPL level VMSA for the vCPU Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 23:21 ` sashiko-bot [this message]
2026-06-08 14:42 ` [PATCH 59/60] kvm: svm: Implement max_planes x86 operation Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 23:33 ` sashiko-bot
2026-06-08 14:42 ` [PATCH 60/60] kvm: svm: Advertise full multi-VMPL support to the SNP guest Jörg Rödel
2026-06-08 14:42 ` Jörg Rödel
2026-06-08 23:40 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260608232139.61E8F1F00893@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.