From: Rosen Penev <rosenp@gmail.com>
To: dmaengine@vger.kernel.org
Cc: Vinod Koul <vkoul@kernel.org>, Frank Li <Frank.Li@kernel.org>,
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH 3/3] dma: mv_xor: use devm for dma pool and irq
Date: Tue, 9 Jun 2026 23:57:37 -0700 [thread overview]
Message-ID: <20260610065737.118211-4-rosenp@gmail.com> (raw)
In-Reply-To: <20260610065737.118211-1-rosenp@gmail.com>
Replace dma_alloc_wc with dmam_alloc_attrs and request_irq
with devm_request_irq. This eliminates the need for
manual cleanup of the dma pool and irq in both the channel
remove function and the channel add error labels, removing
the err_free_irq and err_free_dma labels entirely.
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
drivers/dma/mv_xor.c | 23 +++++++----------------
1 file changed, 7 insertions(+), 16 deletions(-)
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index 3fc39cca7cbd..2ac7f01155fe 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -1013,8 +1013,6 @@ static int mv_xor_channel_remove(struct mv_xor_chan *mv_chan)
dma_async_device_unregister(&mv_chan->dmadev);
- dma_free_wc(dev, MV_XOR_POOL_SIZE,
- mv_chan->dma_desc_pool_virt, mv_chan->dma_desc_pool);
dma_unmap_single(dev, mv_chan->dummy_src_addr,
MV_XOR_MIN_BYTE_COUNT, DMA_FROM_DEVICE);
dma_unmap_single(dev, mv_chan->dummy_dst_addr,
@@ -1025,8 +1023,6 @@ static int mv_xor_channel_remove(struct mv_xor_chan *mv_chan)
list_del(&chan->device_node);
}
- free_irq(mv_chan->irq, mv_chan);
-
return 0;
}
@@ -1077,8 +1073,8 @@ mv_xor_channel_add(struct mv_xor_device *xordev,
* requires that we explicitly flush the writes
*/
mv_chan->dma_desc_pool_virt =
- dma_alloc_wc(&pdev->dev, MV_XOR_POOL_SIZE, &mv_chan->dma_desc_pool,
- GFP_KERNEL);
+ dmam_alloc_attrs(&pdev->dev, MV_XOR_POOL_SIZE, &mv_chan->dma_desc_pool,
+ GFP_KERNEL, DMA_ATTR_WRITE_COMBINE);
if (!mv_chan->dma_desc_pool_virt) {
ret = -ENOMEM;
goto err_unmap_dst;
@@ -1112,10 +1108,10 @@ mv_xor_channel_add(struct mv_xor_device *xordev,
/* clear errors before enabling interrupts */
mv_chan_clear_err_status(mv_chan);
- ret = request_irq(mv_chan->irq, mv_xor_interrupt_handler,
+ ret = devm_request_irq(&pdev->dev, mv_chan->irq, mv_xor_interrupt_handler,
0, dev_name(&pdev->dev), mv_chan);
if (ret)
- goto err_free_dma;
+ goto err_unmap_dst;
mv_chan_unmask_interrupts(mv_chan);
@@ -1138,14 +1134,14 @@ mv_xor_channel_add(struct mv_xor_device *xordev,
ret = mv_chan_memcpy_self_test(mv_chan);
dev_dbg(&pdev->dev, "memcpy self test returned %d\n", ret);
if (ret)
- goto err_free_irq;
+ goto err_unmap_dst;
}
if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
ret = mv_chan_xor_self_test(mv_chan);
dev_dbg(&pdev->dev, "xor self test returned %d\n", ret);
if (ret)
- goto err_free_irq;
+ goto err_unmap_dst;
}
dev_info(&pdev->dev, "Marvell XOR (%s): ( %s%s%s)\n",
@@ -1156,15 +1152,10 @@ mv_xor_channel_add(struct mv_xor_device *xordev,
ret = dma_async_device_register(dma_dev);
if (ret)
- goto err_free_irq;
+ goto err_unmap_dst;
return mv_chan;
-err_free_irq:
- free_irq(mv_chan->irq, mv_chan);
-err_free_dma:
- dma_free_wc(&pdev->dev, MV_XOR_POOL_SIZE,
- mv_chan->dma_desc_pool_virt, mv_chan->dma_desc_pool);
err_unmap_dst:
dma_unmap_single(dma_dev->dev, mv_chan->dummy_dst_addr,
MV_XOR_MIN_BYTE_COUNT, DMA_TO_DEVICE);
--
2.54.0
next prev parent reply other threads:[~2026-06-10 6:58 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-10 6:57 [PATCH 0/3] dma: mv_xor: convert to devm resource management Rosen Penev
2026-06-10 6:57 ` [PATCH 1/3] dma: mv_xor: use devm_clk_get_optional_enabled Rosen Penev
2026-06-10 7:13 ` sashiko-bot
2026-06-10 6:57 ` [PATCH 2/3] dma: mv_xor: add missing platform remove function Rosen Penev
2026-06-10 9:10 ` sashiko-bot
2026-06-10 6:57 ` Rosen Penev [this message]
2026-06-10 7:12 ` [PATCH 3/3] dma: mv_xor: use devm for dma pool and irq sashiko-bot
2026-06-10 14:42 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260610065737.118211-4-rosenp@gmail.com \
--to=rosenp@gmail.com \
--cc=Frank.Li@kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.