From: Stefan Roese <stefan.roese@mailbox.org>
To: Tom Rini <trini@konsulko.com>
Cc: u-boot@lists.denx.de
Subject: Please pull u-boot-marvell/next
Date: Wed, 10 Jun 2026 14:21:55 +0200 [thread overview]
Message-ID: <20260610122155.2674504-1-stefan.roese@mailbox.org> (raw)
Hi Tom,
please pull the following marvell changes for the next branch:
- arm: kirkwood: Remove unnecessary watchdog GPIO for ZyXEL NSA325 board (Tony)
- net: mvpp2: fix NULL pointer dereference in mvpp2_phy_connect (Vincent)
- mtd: nand: pxa3xx: Pass valid dev to dev_err() (Chris)
- arm: mvebu: db-xc3-24g4xg: Remove marvell, nand-keep-config (Chris)
- arm: mvebu: Add Allied Telesis x220 (Chris)
- board: Synology: legacy.c: Include asm/io.h (Phil)
- board: Synology: common: Fix typo in Makefile (Phil)
- serial: serial_octeon_bootcmd.c: use correct Kconfig symbol (Heinrich)
- arm: mvebu: Drop unnecessary BOARD_EARLY_INIT_F usage (Tom)
- pinctrl: armada-38x: Staticize and constify driver ops (Marek)
- arm: mach-mvebu: armada8k: cpuinfo and SAR (Vincent)
- board: freebox: add Nodebox 10G board support (Vincent)
- board: freebox: nbx10g: add emmcboot for dual-bank eMMC boot (Vincent)
- board: freebox: nbx10g: add device serial and MAC address initialization (Vincent)
- arm: dts: armada-8040-nbx: add U-Boot dtsi for conditional OP-TEE (Vincent)
- timer: orion: Use dev_remap_addr_index() (Peng)
CI (GitLab world build) is passing:
https://source.denx.de/u-boot/custodians/u-boot-marvell/-/pipelines/30413
Thanks,
Stefan
The following changes since commit 511bd63db98836579764b87c961a7f50c8149839:
Merge assorted patches to use device API to replace devfdt_ helpers (2026-06-09 16:00:11 -0600)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-marvell.git tags/u-boot-marvell-next-20260610
for you to fetch changes up to eab66c3a9085e07b227847b0c442ee8d2efb241d:
timer: orion: Use dev_remap_addr_index() (2026-06-10 11:23:26 +0200)
----------------------------------------------------------------
u-boot-marvell changes 2026-06-10
----------------------------------------------------------------
Chris Packham (3):
mtd: nand: pxa3xx: Pass valid dev to dev_err()
arm: mvebu: db-xc3-24g4xg: Remove marvell, nand-keep-config
arm: mvebu: Add Allied Telesis x220
Heinrich Schuchardt (1):
serial: serial_octeon_bootcmd.c: use correct Kconfig symbol
Marek Vasut (1):
pinctrl: armada-38x: Staticize and constify driver ops
Peng Fan (1):
timer: orion: Use dev_remap_addr_index()
Phil Sutter (2):
board: Synology: legacy.c: Include asm/io.h
board: Synology: common: Fix typo in Makefile
Tom Rini (1):
arm: mvebu: Drop unnecessary BOARD_EARLY_INIT_F usage
Tony Dinh (1):
arm: kirkwood: Remove unnecessary watchdog GPIO for ZyXEL NSA325 board
Vincent Jardin (6):
net: mvpp2: fix NULL pointer dereference in mvpp2_phy_connect
arm: mach-mvebu: armada8k: cpuinfo and SAR
board: freebox: add Nodebox 10G board support
board: freebox: nbx10g: add emmcboot for dual-bank eMMC boot
board: freebox: nbx10g: add device serial and MAC address initialization
arm: dts: armada-8040-nbx: add U-Boot dtsi for conditional OP-TEE
arch/arm/dts/Makefile | 2 +
arch/arm/dts/armada-8040-nbx-u-boot.dtsi | 15 +
arch/arm/dts/armada-8040-nbx.dts | 259 ++++++++++++++++
arch/arm/dts/armada-xp-atl-x220.dts | 162 ++++++++++
arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi | 1 -
arch/arm/mach-mvebu/Kconfig | 16 +
arch/arm/mach-mvebu/armada8k/Makefile | 2 +-
arch/arm/mach-mvebu/armada8k/cpu.c | 12 +
arch/arm/mach-mvebu/armada8k/soc_info.c | 194 ++++++++++++
arch/arm/mach-mvebu/armada8k/soc_info.h | 14 +
board/Marvell/mvebu_armada-37xx/board.c | 5 -
board/Synology/common/Makefile | 2 +-
board/Synology/common/legacy.c | 1 +
board/alliedtelesis/x220/.gitattributes | 1 +
board/alliedtelesis/x220/.gitignore | 1 +
board/alliedtelesis/x220/MAINTAINERS | 8 +
board/alliedtelesis/x220/Makefile | 14 +
board/alliedtelesis/x220/binary.0 | Bin 0 -> 423 bytes
board/alliedtelesis/x220/kwbimage.cfg.in | 12 +
board/alliedtelesis/x220/x220.c | 67 ++++
board/freebox/nbx10g/Kconfig | 94 ++++++
board/freebox/nbx10g/MAINTAINERS | 6 +
board/freebox/nbx10g/Makefile | 5 +
board/freebox/nbx10g/board.c | 53 ++++
board/freebox/nbx10g/nbx_emmcboot.c | 357 ++++++++++++++++++++++
board/freebox/nbx10g/nbx_fbxserial.c | 286 +++++++++++++++++
board/freebox/nbx10g/nbx_fbxserial.h | 156 ++++++++++
board/freebox/nbx10g/nbx_imagetag.h | 78 +++++
board/freebox/nbx10g/nbx_nrboot.h | 34 +++
board/zyxel/nsa325/nsa325.c | 7 +-
configs/eDPU_defconfig | 1 -
configs/mvebu_db-88f3720_defconfig | 1 -
configs/mvebu_espressobin-88f3720_defconfig | 1 -
configs/mvebu_espressobin_ultra-88f3720_defconfig | 1 -
configs/mvebu_nbx_88f8040_defconfig | 75 +++++
configs/uDPU_defconfig | 1 -
configs/x220_defconfig | 76 +++++
doc/board/alliedtelesis/index.rst | 11 +
doc/board/alliedtelesis/x220.rst | 39 +++
doc/board/index.rst | 1 +
drivers/mtd/nand/raw/pxa3xx_nand.c | 11 +-
drivers/net/mvpp2.c | 4 +-
drivers/pinctrl/mvebu/pinctrl-armada-38x.c | 2 +-
drivers/serial/Kconfig | 2 +-
drivers/timer/orion-timer.c | 3 +-
include/configs/nbx10g.h | 29 ++
include/configs/x220.h | 20 ++
47 files changed, 2114 insertions(+), 28 deletions(-)
create mode 100644 arch/arm/dts/armada-8040-nbx-u-boot.dtsi
create mode 100644 arch/arm/dts/armada-8040-nbx.dts
create mode 100644 arch/arm/dts/armada-xp-atl-x220.dts
create mode 100644 arch/arm/mach-mvebu/armada8k/soc_info.c
create mode 100644 arch/arm/mach-mvebu/armada8k/soc_info.h
create mode 100644 board/alliedtelesis/x220/.gitattributes
create mode 100644 board/alliedtelesis/x220/.gitignore
create mode 100644 board/alliedtelesis/x220/MAINTAINERS
create mode 100644 board/alliedtelesis/x220/Makefile
create mode 100644 board/alliedtelesis/x220/binary.0
create mode 100644 board/alliedtelesis/x220/kwbimage.cfg.in
create mode 100644 board/alliedtelesis/x220/x220.c
create mode 100644 board/freebox/nbx10g/Kconfig
create mode 100644 board/freebox/nbx10g/MAINTAINERS
create mode 100644 board/freebox/nbx10g/Makefile
create mode 100644 board/freebox/nbx10g/board.c
create mode 100644 board/freebox/nbx10g/nbx_emmcboot.c
create mode 100644 board/freebox/nbx10g/nbx_fbxserial.c
create mode 100644 board/freebox/nbx10g/nbx_fbxserial.h
create mode 100644 board/freebox/nbx10g/nbx_imagetag.h
create mode 100644 board/freebox/nbx10g/nbx_nrboot.h
create mode 100644 configs/mvebu_nbx_88f8040_defconfig
create mode 100644 configs/x220_defconfig
create mode 100644 doc/board/alliedtelesis/index.rst
create mode 100644 doc/board/alliedtelesis/x220.rst
create mode 100644 include/configs/nbx10g.h
create mode 100644 include/configs/x220.h
next reply other threads:[~2026-06-10 12:25 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-10 12:21 Stefan Roese [this message]
2026-06-10 19:59 ` Please pull u-boot-marvell/next Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2026-10-05 11:50 Stefan Roese
2026-10-05 21:35 ` Tom Rini
2023-03-30 8:22 Stefan Roese
2023-03-30 14:35 ` Tom Rini
2023-03-24 14:49 Stefan Roese
2023-03-25 13:39 ` Tom Rini
2023-03-01 15:49 Stefan Roese
2023-03-01 19:54 ` Tom Rini
2022-09-20 6:59 Stefan Roese
2022-09-20 18:16 ` Tom Rini
2021-12-21 8:27 Stefan Roese
2021-12-23 1:55 ` Tom Rini
2021-12-18 13:51 Stefan Roese
2021-12-18 14:12 ` Tom Rini
2021-10-01 12:36 Stefan Roese
2021-10-01 13:16 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260610122155.2674504-1-stefan.roese@mailbox.org \
--to=stefan.roese@mailbox.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.