[PATCHv3 6/6] serial: mxs-auart: terminate DMA before releasing channels in exit

[Rosen Penev <rosenp@gmail.com>]

mxs_auart_dma_exit_channel() calls dma_release_channel() and then
kfree() on the DMA buffers without first terminating any in-flight
transfers. If an asynchronous DMA transfer completes after the buffers
have been freed, the callback will access freed memory.

Call dmaengine_terminate_sync() on each channel before releasing it
to safely abort pending transfers.

Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/tty/serial/mxs-auart.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index fe48a372d022..ec2c60dd0f52 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -872,10 +872,12 @@ static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s)
 static void mxs_auart_dma_exit_channel(struct mxs_auart_port *s)
 {
 	if (s->tx_dma_chan) {
+		dmaengine_terminate_sync(s->tx_dma_chan);
 		dma_release_channel(s->tx_dma_chan);
 		s->tx_dma_chan = NULL;
 	}
 	if (s->rx_dma_chan) {
+		dmaengine_terminate_sync(s->rx_dma_chan);
 		dma_release_channel(s->rx_dma_chan);
 		s->rx_dma_chan = NULL;
 	}
-- 
2.54.0