All of lore.kernel.org
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Alex Williamson" <alex.williamson@nvidia.com>
Cc: kvm@vger.kernel.org
Subject: Re: [PATCH 2/2] vfio/pci: Latch all module parameters per device
Date: Thu, 11 Jun 2026 18:44:28 +0000	[thread overview]
Message-ID: <20260611184428.C16441F00A3A@smtp.kernel.org> (raw)
In-Reply-To: <20260611182528.4004073-3-alex.williamson@nvidia.com>

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:

New issues:
- [High] VGA Arbiter NULL Pointer Dereference on Error Path

Pre-existing issues:
- [High] Bitfield data race breaking device interrupts and Runtime PM
--

commit 26787ee0fbb65453cacc903b9b0170155208490a
Author: Alex Williamson <alex.williamson@nvidia.com>

vfio/pci: Latch all module parameters per device

The vfio-pci module parameters of disable_idle_d3, nointxmask, and
disable_vga latch vfio-pci policy into vfio-pci-core globals each time
the vfio-pci module is initialized. The disable_idle_d3 parameter has
already migrated to a per-device flag in order to provide consistency
for refcounted PM operations for the lifetime of the device registration.

Pull the remaining vfio-pci module-parameter policy out of vfio-pci-core
into per-device flags set at device initialization.

> diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c
> index 9f71eae0cc947..61cf1a1996b0d 100644
> --- a/drivers/vfio/pci/vfio_pci_core.c
> +++ b/drivers/vfio/pci/vfio_pci_core.c

[ ... ]

> @@ -111,11 +107,12 @@ static inline bool vfio_vga_disabled(void)
>   */
>  static unsigned int vfio_pci_set_decode(struct pci_dev *pdev, bool single_vga)
>  {
> +	struct vfio_pci_core_device *vdev = dev_get_drvdata(&pdev->dev);
>  	struct pci_dev *tmp = NULL;
>  	unsigned char max_busnr;
>  	unsigned int decodes;
>  
> -	if (single_vga || !vfio_vga_disabled() || pci_is_root_bus(pdev->bus))
> +	if (single_vga || !vfio_vga_disabled(vdev) || pci_is_root_bus(pdev->bus))

[Severity: High]
If vfio_pci_core_register_device() fails on vfio_register_group_dev(), the
error path skips calling vfio_pci_vga_uninit():

	out_power:
		if (!vdev->disable_idle_d3)
			pm_runtime_get_noresume(dev);

		pm_runtime_forbid(dev);
	out_vf:
		vfio_pci_vf_uninit(vdev);
		return ret;

This leaves the device registered with the VGA arbiter. After the probe fails,
the driver core clears the drvdata.

Will the VGA arbiter later invoke this callback, causing dev_get_drvdata() to
return NULL and vfio_vga_disabled(vdev) to panic when dereferencing vdev?

> diff --git a/include/linux/vfio_pci_core.h b/include/linux/vfio_pci_core.h
> index 27aab3fdbb91d..74b950d73aef0 100644
> --- a/include/linux/vfio_pci_core.h
> +++ b/include/linux/vfio_pci_core.h

[ ... ]

> @@ -128,6 +128,8 @@ struct vfio_pci_core_device {
>  	bool			pm_intx_masked:1;
>  	bool			pm_runtime_engaged:1;
>  	bool			disable_idle_d3:1;
> +	bool			nointxmask:1;
> +	bool			disable_vga:1;
>  	bool			sriov_active;

[Severity: High]
This is a pre-existing issue, but this patch extends the bitfield block that
has a data race.

vdev->pm_intx_masked and vdev->pm_runtime_engaged are adjacent bitfields.

In vfio_pci_core_runtime_suspend(), pm_intx_masked is updated without holding
vdev->memory_lock:

	vdev->pm_intx_masked = ((vdev->irq_type == VFIO_PCI_INTX_IRQ_INDEX) &&
				vfio_pci_intx_mask(vdev));

Concurrently, userspace can call __vfio_pci_runtime_pm_exit(), which takes
vdev->memory_lock and updates pm_runtime_engaged:

	if (vdev->pm_runtime_engaged) {
		vdev->pm_runtime_engaged = false;

Because these bitfields share the same memory byte and are updated without a
shared lock, will the read-modify-write operations race and potentially lose
one of the updates, permanently breaking device interrupts or low-power state
entry?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260611182528.4004073-1-alex.williamson@nvidia.com?part=2

  reply	other threads:[~2026-06-11 18:44 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-11 18:25 [PATCH 0/2] vfio/pci: Latch module parameters per device Alex Williamson
2026-06-11 18:25 ` [PATCH 1/2] vfio/pci: Latch disable_idle_d3 " Alex Williamson
2026-06-11 18:25 ` [PATCH 2/2] vfio/pci: Latch all module parameters " Alex Williamson
2026-06-11 18:44   ` sashiko-bot [this message]
2026-06-11 19:06     ` Alex Williamson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260611184428.C16441F00A3A@smtp.kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=alex.williamson@nvidia.com \
    --cc=kvm@vger.kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.