From: SeongJae Park <sj@kernel.org>
To: gutierrez.asier@huawei-partners.com
Cc: SeongJae Park <sj@kernel.org>,
artem.kuzin@huawei.com, stepanov.anatoly@huawei.com,
wangkefeng.wang@huawei.com, yanquanmin1@huawei.com,
zuoze1@huawei.com, damon@lists.linux.dev,
akpm@linux-foundation.org, linux-mm@kvack.org,
linux-kernel@vger.kernel.org
Subject: Re: [RFC PATCH v4 2/4] mm/damon: introduce DAMON_HUGEPAGE for hot region hugepage collapsing
Date: Thu, 11 Jun 2026 17:46:45 -0700 [thread overview]
Message-ID: <20260612004645.83801-1-sj@kernel.org> (raw)
In-Reply-To: <20260611150244.3454699-3-gutierrez.asier@huawei-partners.com>
On Thu, 11 Jun 2026 15:02:42 +0000 <gutierrez.asier@huawei-partners.com> wrote:
> From: Asier Gutierrez <gutierrez.asier@huawei-partners.com>
>
> This patch introduces a new DAMON module (SAMPLE_DAMON_HUGEPAGE)
> which collapses hot regions into huge pages.
To the previous revision, I suggested SAMPLE_DAMON_HPAGE. Because you didn't
comment more, I thought my suggestion is accepted. Can you please elaborate
why you use this name instead of the suggested one?
If there is no special reason, could you please do 's/hugepage/hpage/a' for
this patch?
>
> SAMPLE_DAMON_HUGEPAGE operates in the virtual memory space, for a
> specific task. The user is expected to supply the PID of the task
> that is going to be monitored through the monitored_pid module
> variable.
>
> SAMPLE_DAMON_HUGEPAGE uses the hugepage auto-tune mechanism to
> increase or decrease the aggressiveness of page collapsing. User
> autotuning is also available for additional tuning aggressiveness
> control.
>
> The module also includes changes to the DAMON compilation, so that
> the module can be enabled or disabled.
The above sentence is wrong?
>
> Signed-off-by: Asier Gutierrez <gutierrez.asier@huawei-partners.com>
> ---
> samples/damon/Kconfig | 12 ++
> samples/damon/Makefile | 1 +
> samples/damon/hugepage.c (new) | 207 +++++++++++++++++++++++++++++++++
> 3 files changed, 220 insertions(+)
>
> diff --git a/samples/damon/Kconfig b/samples/damon/Kconfig
> index cbf96fd8a8bf..512f150aaabb 100644
> --- a/samples/damon/Kconfig
> +++ b/samples/damon/Kconfig
> @@ -40,4 +40,16 @@ config SAMPLE_DAMON_MTIER
>
> If unsure, say N.
>
> +config SAMPLE_DAMON_HUGEPAGE
> + bool "Build DAMON-based collapse of hot regions (SAMPLE_DAMON_HUGEPAGE)"
> + depends on DAMON && DAMON_VADDR
> + help
> + This module monitors a certain PID provided by the user through
> + monitored_pid attribute. Hot regions are determined by DAMON-based
target_pid?
> + sampling. Collapsing occurs according to the quota goal using total
> + memory usage to huge page usage ratio. The ratio is set by the user
> + through a module attribute.
> +
> + If unsure, say N.
Please give a simple one sentence at the beginning of the help message, like
other sample modules.
> +
> endmenu
> diff --git a/samples/damon/Makefile b/samples/damon/Makefile
> index 72f68cbf422a..96bde2c44846 100644
> --- a/samples/damon/Makefile
> +++ b/samples/damon/Makefile
> @@ -3,3 +3,4 @@
> obj-$(CONFIG_SAMPLE_DAMON_WSSE) += wsse.o
> obj-$(CONFIG_SAMPLE_DAMON_PRCL) += prcl.o
> obj-$(CONFIG_SAMPLE_DAMON_MTIER) += mtier.o
> +obj-$(CONFIG_SAMPLE_DAMON_HUGEPAGE) += hugepage.o
> diff --git a/samples/damon/hugepage.c b/samples/damon/hugepage.c
> new file mode 100644
> index 000000000000..2c7fd213a8db
> --- /dev/null
> +++ b/samples/damon/hugepage.c
> @@ -0,0 +1,207 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2026 HUAWEI, Inc.
> + * https://www.huawei.com
> + *
> + * Author: Asier Gutierrez <gutierrez.asier@huawei-partners.com>
> + */
> +
> +#define pr_fmt(fmt) "damon_sample_hugepage: " fmt
> +
> +#include <linux/damon.h>
> +#include <linux/kstrtox.h>
> +#include <linux/module.h>
> +
> +#ifdef MODULE_PARAM_PREFIX
> +#undef MODULE_PARAM_PREFIX
> +#endif
> +#define MODULE_PARAM_PREFIX "damon_sample_hugepage."
> +
> +static bool enabled __read_mostly;
> +
> +static unsigned long target_pid;
> +module_param(target_pid, ulong, 0600);
> +
> +/* By default, total huge pages to system memory usage ratio set to 10% */
> +static unsigned long quota_percentage_hugepage __read_mostly = 1000;
> +module_param(quota_percentage_hugepage, ulong, 0600);
> +
> +static unsigned long quota_autotune_feedback __read_mostly;
> +module_param(quota_autotune_feedback, ulong, 0600);
> +
> +static struct damon_ctx *ctx;
> +static struct pid *target_pidp;
> +
> +static int damon_sample_hugepage_damon_call_fn(void *data)
> +{
> + struct damon_ctx *c = data;
> + struct damon_target *t;
> +
> + damon_for_each_target(t, c) {
> + struct damon_region *r;
> + unsigned long hugepages = 0;
> +
> + damon_for_each_region(r, t) {
> + if (r->nr_accesses > 0)
> + hugepages += r->ar.end - r->ar.start;
> + }
> + hugepages = hugepages / HPAGE_PMD_SIZE;
> + pr_info("hugepage: %lu\n", hugepages);
> + }
> + return 0;
> +}
> +
> +static struct damon_call_control call_control = {
> + .fn = damon_sample_hugepage_damon_call_fn,
> + .repeat = true,
> +};
> +
> +static int damon_sample_hugepage_start(void)
> +{
> + int err;
> + struct damon_target *target;
> + struct damos *scheme;
> + struct damos_quota_goal *goal;
> +
> + pr_info("start\n");
> +
> +
> + ctx = damon_new_ctx();
> + if (!ctx)
> + return -ENOMEM;
> + if (damon_select_ops(ctx, DAMON_OPS_VADDR)) {
> + damon_destroy_ctx(ctx);
> + return -EINVAL;
> + }
> +
> + target = damon_new_target();
> + if (!target) {
> + damon_destroy_ctx(ctx);
> + return -ENOMEM;
> + }
> + damon_add_target(ctx, target);
> + target_pidp = find_get_pid(target_pid);
> + if (!target_pidp) {
> + damon_destroy_ctx(ctx);
> + return -EINVAL;
> + }
> + target->pid = target_pidp;
> +
> + scheme = damon_new_scheme(&(struct damos_access_pattern) {
> + .min_sz_region = HPAGE_PMD_SIZE,
> + .max_sz_region = ULONG_MAX,
> + .min_nr_accesses = 0,
> + .max_nr_accesses = UINT_MAX,
> + .min_age_region = 50,
> + .max_age_region = UINT_MAX},
> + DAMOS_COLLAPSE, 0,
> + &(struct damos_quota) {
> + .ms = 10,
> + .sz = 128 * 1024 * 1024,
> + .reset_interval = 1000,
> + .weight_sz = 0,
> + .weight_nr_accesses = 1,
> + .weight_age = 1,
> + .goal_tuner = DAMOS_QUOTA_GOAL_TUNER_TEMPORAL},
> + &(struct damos_watermarks){}, NUMA_NO_NODE);
> + if (!scheme) {
> + damon_destroy_ctx(ctx);
> + return -ENOMEM;
> + }
> + damon_set_schemes(ctx, &scheme, 1);
> + goal = damos_new_quota_goal(DAMOS_QUOTA_HUGEPAGE_MEM_BP,
> + quota_percentage_hugepage);
> + if (!goal) {
> + damon_destroy_ctx(ctx);
> + return -ENOMEM;
> + }
> + damos_add_quota_goal(&scheme->quota, goal);
> +
> + if (quota_autotune_feedback) {
> + goal = damos_new_quota_goal(DAMOS_QUOTA_USER_INPUT, 10000);
> + if (!goal) {
> + damon_destroy_ctx(ctx);
> + return -ENOMEM;
> + }
> + goal->current_value = quota_autotune_feedback;
> + damos_add_quota_goal(&scheme->quota, goal);
> + }
> +
> + err = damon_start(&ctx, 1, true);
> + if (err) {
> + damon_destroy_ctx(ctx);
> + return err;
> + }
> +
> + call_control.data = ctx;
> + err = damon_call(ctx, &call_control);
> + if (err) {
> + damon_stop(&ctx, 1);
> + damon_destroy_ctx(ctx);
> + }
> + return err;
> +}
> +
> +static void damon_sample_hugepage_stop(void)
> +{
> + pr_info("stop\n");
> + if (ctx) {
> + damon_stop(&ctx, 1);
> + damon_destroy_ctx(ctx);
> + }
> +}
> +static int damon_sample_hugepage_enabled_store(const char *val,
> + const struct kernel_param *kp)
> +{
> + bool is_enabled = enabled;
> + int err;
> +
> + err = kstrtobool(val, &enabled);
> + if (err)
> + return err;
> +
> + if (enabled == is_enabled)
> + return 0;
> +
> + if (!damon_initialized())
> + return 0;
> +
> + if (enabled) {
> + err = damon_sample_hugepage_start();
> + if (err)
> + enabled = false;
> + return err;
> + }
> + damon_sample_hugepage_stop();
> + return 0;
> +}
> +
> +static const struct kernel_param_ops enabled_param_ops = {
> + .set = damon_sample_hugepage_enabled_store,
> + .get = param_get_bool,
> +};
> +
> +module_param_cb(enabled, &enabled_param_ops, &enabled, 0600);
> +MODULE_PARM_DESC(enabled,
> + "Enable or disable DAMON_HUGEPAGE (default: disabled)");
> +
> +static int __init damon_sample_hugepage_init(void)
> +{
> + int err = 0;
> +
> + if (!damon_initialized()) {
> + if (enabled)
> + enabled = false;
> + pr_warn("Module not initialized\n");
> + return -ENOMEM;
> + }
> +
> + if (enabled) {
> + err = damon_sample_hugepage_start();
> + if (err)
> + enabled = false;
> + }
> + return err;
> +}
> +
> +module_init(damon_sample_hugepage_init);
> --
> 2.43.0
Looks good overall, except the name that is not consistent to other sample
modules.
The wrong sentence in the commit message makes me feel this patch is not really
ready for a review of details, though. I therefore skipped reviewing each
details. Could you plese thoroughly check details in the next revision? I
will reiterate more details in the next revision, then.
Thanks,
SJ
next prev parent reply other threads:[~2026-06-12 0:46 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-11 15:02 [RFC PATCH v4 0/4] mm/damon: Introduce a huge page collapsing mechanism using auto tuning gutierrez.asier
2026-06-11 15:02 ` [RFC PATCH v4 1/4] mm/damon: Introduce DAMOS_QUOTA_HUGEPAGE " gutierrez.asier
2026-06-11 15:20 ` sashiko-bot
2026-06-11 15:02 ` [RFC PATCH v4 2/4] mm/damon: introduce DAMON_HUGEPAGE for hot region hugepage collapsing gutierrez.asier
2026-06-11 15:21 ` sashiko-bot
2026-06-12 0:46 ` SeongJae Park [this message]
2026-06-11 15:02 ` [RFC PATCH v4 3/4] mm/damon/sysfs: support hugepage_mem_bp quota goal metric gutierrez.asier
2026-06-11 15:24 ` sashiko-bot
2026-06-12 0:31 ` SeongJae Park
2026-06-11 15:02 ` [RFC PATCH v4 4/4] Documentation/admin-guide/mm/damon: add DAMON-based Hugepage Management gutierrez.asier
2026-06-11 15:14 ` sashiko-bot
2026-06-12 0:33 ` SeongJae Park
2026-06-12 0:56 ` [RFC PATCH v4 0/4] mm/damon: Introduce a huge page collapsing mechanism using auto tuning SeongJae Park
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260612004645.83801-1-sj@kernel.org \
--to=sj@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=artem.kuzin@huawei.com \
--cc=damon@lists.linux.dev \
--cc=gutierrez.asier@huawei-partners.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=stepanov.anatoly@huawei.com \
--cc=wangkefeng.wang@huawei.com \
--cc=yanquanmin1@huawei.com \
--cc=zuoze1@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.