From: Lance Yang <lance.yang@linux.dev>
To: leitao@debian.org
Cc: catalin.marinas@arm.com, akpm@linux-foundation.org,
lance.yang@linux.dev, dave@stgolabs.net, oleg@redhat.com,
cai@lca.pw, linux-mm@kvack.org, linux-kernel@vger.kernel.org,
kernel-team@meta.com, stable@vger.kernel.org
Subject: Re: [PATCH v2] mm/kmemleak: avoid soft lockup when scanning task stacks
Date: Sat, 13 Jun 2026 00:52:06 +0800 [thread overview]
Message-ID: <20260612165206.93126-1-lance.yang@linux.dev> (raw)
In-Reply-To: <20260612-kmemleak-stack-resched-v2-1-53240de79e88@debian.org>
On Fri, Jun 12, 2026 at 08:16:07AM -0700, Breno Leitao wrote:
>kmemleak_scan() walks every thread and scans its kernel stack under a
>single rcu_read_lock() with no reschedule point. On a host with very
>many threads -- amplified by KASAN/lockdep in debug builds -- this loop
>can hog a CPU long enough to trip the soft lockup watchdog:
>
> watchdog: BUG: soft lockup - CPU#35 stuck for 22s! [kmemleak:537]
> scan_block
> kmemleak_scan
> kmemleak_scan_thread
> kthread
>
>A cond_resched() cannot be added directly: the loop runs inside an RCU
>read-side critical section.
>
>Borrow the rcu_lock_break() pattern from kernel/hung_task.c: when a
>reschedule is needed, pin the two iteration cursors, drop the RCU read
>lock, cond_resched(), then re-acquire it and continue only if both
>cursors are still hashed.
>
>If a cursor was unhashed while the lock was dropped, the thread list
>cannot be walked further, so the round is aborted. Such a round scans
>only part of the task stacks, which would make live objects look
>unreferenced, so reuse the existing "scan interrupted" path to skip
>reporting; the next full scan reports the real leaks.
TBH, a bit dense to me as written ...
>Fixes: c4b28963fd79 ("mm/kmemleak: rely on rcu for task stack scanning")
>Cc: stable@vger.kernel.org
>Signed-off-by: Breno Leitao <leitao@debian.org>
>---
>Changes in v2:
>- Do not create the nasty array, but use the same pattern as
> kernel/hung_task.c.
>- Link to v1: https://lore.kernel.org/r/20260611-kmemleak-stack-resched-v1-1-d6248ade5f4a@debian.org
>---
> mm/kmemleak.c | 42 ++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 40 insertions(+), 2 deletions(-)
>
>diff --git a/mm/kmemleak.c b/mm/kmemleak.c
>index 7c7ba17ce7af0..d88274dc0c605 100644
>--- a/mm/kmemleak.c
>+++ b/mm/kmemleak.c
>@@ -1695,6 +1695,32 @@ static void kmemleak_cond_resched(struct kmemleak_object *object)
> put_object(object);
> }
>
>+/*
>+ * Briefly drop the RCU read lock to reschedule during the task stack scan.
>+ * Both cursors are pinned across the gap; return false if either one was
>+ * unhashed meanwhile, so the caller stops this round instead of walking a
>+ * stale list.
>+ */
Personally, looks a bit clunky to me with "gap" and "unhashed" ...
Maybe:
"
Drop RCU long enough to reschedule during task stack scanning. Keep both
cursors alive while RCU is dropped; return false if either cursor can no
longer continue the walk.
"
>+static bool kmemleak_stack_scan_break(struct task_struct *g,
>+ struct task_struct *p)
>+{
>+ bool can_cont;
>+
>+ get_task_struct(g);
>+ get_task_struct(p);
>+
>+ rcu_read_unlock();
>+ cond_resched();
>+ rcu_read_lock();
>+
>+ can_cont = pid_alive(g) && pid_alive(p);
>+
>+ put_task_struct(p);
>+ put_task_struct(g);
>+
>+ return can_cont;
>+}
>+
> /*
> * Print one leak inline. The hex dump is gated on OBJECT_ALLOCATED so it
> * does not touch user memory that was freed concurrently; the rest of the
>@@ -1804,6 +1830,7 @@ static void kmemleak_scan(void)
> int __maybe_unused i;
> struct xarray dedup;
> int new_leaks = 0;
>+ bool aborted = false;
>
> jiffies_last_scan = jiffies;
>
>@@ -1890,11 +1917,21 @@ static void kmemleak_scan(void)
> rcu_read_lock();
> for_each_process_thread(g, p) {
> void *stack = try_get_task_stack(p);
>+
> if (stack) {
> scan_block(stack, stack + THREAD_SIZE, NULL);
> put_task_stack(p);
> }
>+ /*
>+ * This is an expensive loop, we must to call the
>+ * scheduler to avoid lockups
>+ */
need_resched() plus the helper name already says most of it. Maybe just:
"
Break the RCU read-side section before rescheduling.
"
>+ if (need_resched() && !kmemleak_stack_scan_break(g, p)) {
>+ aborted = true;
>+ goto unlock;
>+ }
> }
>+unlock:
> rcu_read_unlock();
> }
>
>@@ -1937,9 +1974,10 @@ static void kmemleak_scan(void)
> scan_gray_list();
>
> /*
>- * If scanning was stopped do not report any new unreferenced objects.
>+ * If scanning was stopped or a stack scan round was aborted, do not
>+ * report any new unreferenced objects.
> */
Maybe just say "stack root scan was incomplete" here? That's the actual
reason we skip reporting.
"
If scanning was stopped or the stack root scan was incomplete, do not
report any new unreferenced objects.
"
>- if (scan_should_stop())
>+ if (scan_should_stop() || aborted)
> return;
>
> /*
>
>---
Apart from that, feel free to add:
Acked-by: Lance Yang <lance.yang@linux.dev>
next prev parent reply other threads:[~2026-06-12 16:52 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-12 15:16 [PATCH v2] mm/kmemleak: avoid soft lockup when scanning task stacks Breno Leitao
2026-06-12 16:52 ` Lance Yang [this message]
2026-06-12 17:11 ` Catalin Marinas
2026-06-13 0:53 ` SeongJae Park
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260612165206.93126-1-lance.yang@linux.dev \
--to=lance.yang@linux.dev \
--cc=akpm@linux-foundation.org \
--cc=cai@lca.pw \
--cc=catalin.marinas@arm.com \
--cc=dave@stgolabs.net \
--cc=kernel-team@meta.com \
--cc=leitao@debian.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=oleg@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.