From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-alma10-1.taild15c8.ts.net [100.103.45.18]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 1A8483D091A; Tue, 16 Jun 2026 18:13:56 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=100.103.45.18 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1781633637; cv=none; b=O+wQ6YH0ls/Aiar8TX7kEAEplN4z6FSvKVeO9zIicNCnuRwoOsURkKcZWwA54XCpTcnI6WG1lCmZOihVv41WUbaai+EkZr9iEogUGY0qaHdIeiVFIpaeTN3dJnGKWohRSpd6kh6tdSVp6LZpDK97wBcYLOQBO1gwapOpY8ocdSo= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1781633637; c=relaxed/simple; bh=k9taSoh8+Qijw9M2rPCrnEXZS5pRN3Q2S1jjbND5jKk=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=jW3McXkIz9TecMxWa8mgPmOHiURuSvyV0ahfUdEMcDR1L2QxEcVjTJ1EupTp1ytbyAhMhHUWkXIK4+p93dtcaMKhbZ2XrOwyW/loFIITnKUcQjqT7zMkgXV6JSM6ABc95D6+91GBA+/xXi6F+tnBgh4sC45/A7VIPEFcciZlwkQ= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=linuxfoundation.org header.i=@linuxfoundation.org header.b=SkE8d3UC; arc=none smtp.client-ip=100.103.45.18 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=linuxfoundation.org header.i=@linuxfoundation.org header.b="SkE8d3UC" Received: by smtp.kernel.org (Postfix) with ESMTPSA id 298611F000E9; Tue, 16 Jun 2026 18:13:54 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linuxfoundation.org; s=korg; t=1781633636; bh=uNczgTlQG1g2UqxexCUDKgnC3HiFuaU/JdKMBG392M0=; h=From:To:Cc:Subject:Date:In-Reply-To:References; b=SkE8d3UCQZa4w/7PoEa7hsk94jq4xeSSUnc50XZu5G5TSMZygfjpe00wvLhri+qP7 u9SLbcnnrIZNslAhhWy8eVCTyiFdpyXnhqp5/5rXIw6iCwSkXSmd5QMQJdeZEhFDdm U1EJe3xw6AZHRwXAxRBsROvbnLcZkXiBB/hKBmjM= From: Greg Kroah-Hartman To: stable@vger.kernel.org Cc: Greg Kroah-Hartman , patches@lists.linux.dev, Wanquan Zhong , Johan Hovold Subject: [PATCH 5.15 115/411] USB: serial: option: add missing RSVD(5) flag for Rolling RW135R-GL Date: Tue, 16 Jun 2026 20:25:53 +0530 Message-ID: <20260616145106.415422547@linuxfoundation.org> X-Mailer: git-send-email 2.54.0 In-Reply-To: <20260616145100.376842714@linuxfoundation.org> References: <20260616145100.376842714@linuxfoundation.org> User-Agent: quilt/0.69 X-stable: review X-Patchwork-Hint: ignore Precedence: bulk X-Mailing-List: patches@lists.linux.dev List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit 5.15-stable review patch. If anyone has any objections, please let me know. ------------------ From: Wanquan Zhong commit 689f2facc689c8add11d7ff69fbbad17d65ee596 upstream. The RW135R-GL entry added in commit 01e8d0f74222 ("USB: serial: option: add support for Rolling Wireless RW135R-GL") was missing the .driver_info = RSVD(5) flag used by other Rolling Wireless MBIM laptop modules (e.g. RW135-GL and RW350-GL). Without this flag, the option driver incorrectly binds to the reserved ADB interface (If#5) in multi-interface USB modes, causing AT/MBIM communication failures after mode switching. This matches the handling of other Rolling Wireless MBIM devices. - VID:PID 33f8:1003, RW135R-GL for laptop debug M.2 cards (with MBIM interface for Linux/Chrome OS) 0x1003: mbim, diag, AT, pipe Here are the outputs of usb-devices: T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=1003 Rev= 5.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling RW135R-GL Module S: SerialNumber=12345678 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms - VID:PID 33f8:1003, RW135R-GL for laptop debug M.2 cards (with MBIM interface for Linux/Chrome OS) 0x1003: mbim, diag, AT, ADB, pipe Here are the outputs of usb-devices: T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=1003 Rev= 5.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling RW135R-GL Module S: SerialNumber=12345678 C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms - VID:PID 33f8:1003, RW135R-GL for laptop debug M.2 cards (with MBIM interface for Linux/Chrome OS) 0x1003: mbim, pipe Here are the outputs of usb-devices: T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=1003 Rev= 5.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling RW135R-GL Module S: SerialNumber=12345678 C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Fixes: 01e8d0f74222 ("USB: serial: option: add support for Rolling Wireless RW135R-GL") Signed-off-by: Wanquan Zhong Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2476,7 +2476,8 @@ static const struct usb_device_id option { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x0302, 0xff) }, /* Rolling RW101R-GL (laptop MBIM) */ { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x0802, 0xff), /* Rolling RW350-GL (laptop MBIM) */ .driver_info = RSVD(5) }, - { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x1003, 0xff) }, /* Rolling RW135R-GL (laptop MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x1003, 0xff), /* Rolling RW135R-GL (laptop MBIM) */ + .driver_info = RSVD(5) }, { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0100, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WWD for Global */ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0100, 0xff, 0x00, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0100, 0xff, 0xff, 0x40) },