[PATCH v6 4/4] arm64: dts: nuvoton: npcm845-evb: Add peripheral nodes

[Tomer Maimon <tmaimon77@gmail.com>]

Enable peripheral support for the NPCM845 evaluation board by wiring up
the SoC controller nodes to the board design. Add board aliases,
GPIO-backed MDIO buses for the external PHYs, a reserved-memory region
for TIP firmware, and flash partitions for the FIU boot flash. Enable
the Ethernet MACs, MMC controller, FIU controllers, USB device
controllers, ADC, RNG, PWM/FAN controller, I2C buses, and PECI
interface with the board-specific pinctrl and PHY connections they
require.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
---
 .../boot/dts/nuvoton/nuvoton-npcm845-evb.dts  | 417 ++++++++++++++++++
 1 file changed, 417 insertions(+)

diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
index 5edf5d13342d..1092dc5bb7ab 100644
--- a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
@@ -10,6 +10,42 @@ / {
 
 	aliases {
 		serial0 = &serial0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+		ethernet3 = &gmac3;
+		mdio-gpio0 = &mdio0;
+		mdio-gpio1 = &mdio1;
+		fiu0 = &fiu0;
+		fiu1 = &fiu3;
+		fiu2 = &fiux;
+		fiu3 = &fiu1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		i2c16 = &i2c16;
+		i2c17 = &i2c17;
+		i2c18 = &i2c18;
+		i2c19 = &i2c19;
+		i2c20 = &i2c20;
+		i2c21 = &i2c21;
+		i2c22 = &i2c22;
+		i2c23 = &i2c23;
+		i2c24 = &i2c24;
+		i2c25 = &i2c25;
+		i2c26 = &i2c26;
 	};
 
 	chosen {
@@ -26,12 +62,393 @@ refclk: refclk-25mhz {
 		clock-frequency = <25000000>;
 		#clock-cells = <0>;
 	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tip_reserved: tip@0 {
+			reg = <0x0 0x0 0x0 0x6200000>;
+			no-map;
+		};
+	};
+
+	mdio0: mdio-0 {
+		compatible = "virtual,mdio-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>,
+			<&gpio1 26 GPIO_ACTIVE_HIGH>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+
+	mdio1: mdio-1 {
+		compatible = "virtual,mdio-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>,
+			<&gpio2 28 GPIO_ACTIVE_HIGH>;
+
+		phy1: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gmac1 {
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gmac2 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&r1_pins
+			&r1oen_pins>;
+	phy-handle = <&phy0>;
+	status = "okay";
+};
+
+&gmac3 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&r2_pins
+			&r2oen_pins>;
+	phy-handle = <&phy1>;
+	status = "okay";
 };
 
 &serial0 {
 	status = "okay";
 };
 
+&fiu0 {
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-rx-bus-width = <1>;
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bmc@0 {
+				compatible = "fixed-partitions";
+				label = "bmc";
+				reg = <0x00000000 0x04000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				u-boot@0 {
+					label = "u-boot";
+					reg = <0x00000000 0x007C0000>;
+				};
+				u-boot-env@7c0000 {
+					label = "u-boot-env";
+					reg = <0x007C0000 0x00040000>;
+				};
+				kernel@800000 {
+					label = "kernel";
+					reg = <0x00800000 0x00800000>;
+				};
+				rofs@1000000 {
+					label = "rofs";
+					reg = <0x01000000 0x02C00000>;
+				};
+				rwfs@3c00000 {
+					label = "rwfs";
+					reg = <0x03C00000 0x00400000>;
+				};
+			};
+		};
+	};
+};
+
+&fiu1 {
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "spi1-system1";
+				reg = <0x0 0x0>;
+			};
+		};
+	};
+};
+
+&fiu3 {
+	pinctrl-0 = <&spi3_pins>, <&spi3quad_pins>;
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-rx-bus-width = <1>;
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "spi3-system1";
+				reg = <0x0 0x0>;
+			};
+		};
+	};
+};
+
+&fiux {
+	nuvoton,spix-mode;
+};
+
+&sdhci {
+	status = "okay";
+};
+
+&udc0 {
+	status = "okay";
+};
+
+&udc1 {
+	status = "okay";
+};
+
+&udc2 {
+	status = "okay";
+};
+
+&udc3 {
+	status = "okay";
+};
+
+&udc4 {
+	status = "okay";
+};
+
+&udc5 {
+	status = "okay";
+};
+
+&udc6 {
+	status = "okay";
+};
+
+&udc7 {
+	status = "okay";
+};
+
+&mc {
+	status = "okay";
+};
+
+&peci {
+	status = "okay";
+};
+
+&rng {
+	status = "okay";
+};
+
+&adc {
+	#io-channel-cells = <1>;
+	status = "okay";
+};
+
 &watchdog1 {
 	status = "okay";
 };
+
+&pwm_fan {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins &pwm1_pins
+		&pwm2_pins &pwm3_pins
+		&pwm4_pins &pwm5_pins
+		&pwm6_pins &pwm7_pins
+		&fanin0_pins &fanin1_pins
+		&fanin2_pins &fanin3_pins
+		&fanin4_pins &fanin5_pins
+		&fanin6_pins &fanin7_pins>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	fan@0 {
+		reg = <0x00>;
+		fan-tach-ch = /bits/ 8 <0x0 0x1>;
+		cooling-levels = <127 255>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		fan-tach-ch = /bits/ 8 <0x2 0x3>;
+		cooling-levels = <127 255>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		fan-tach-ch = /bits/ 8 <0x4 0x5>;
+		cooling-levels = <127 255>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		fan-tach-ch = /bits/ 8 <0x6 0x7>;
+		cooling-levels = <127 255>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		fan-tach-ch = /bits/ 8 <0x8 0x9>;
+		cooling-levels = <127 255>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		fan-tach-ch = /bits/ 8 <0xa 0xb>;
+		cooling-levels = <127 255>;
+	};
+	fan@6 {
+		reg = <0x06>;
+		fan-tach-ch = /bits/ 8 <0xc 0xd>;
+		cooling-levels = <127 255>;
+	};
+	fan@7 {
+		reg = <0x07>;
+		fan-tach-ch = /bits/ 8 <0xe 0xf>;
+		cooling-levels = <127 255>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <0x10>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	ipmb@11 {
+		compatible = "ipmb-dev";
+		reg = <0x11>;
+		i2c-protocol;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&i2c16 {
+	status = "okay";
+};
+
+&i2c17 {
+	status = "okay";
+};
+
+&i2c18 {
+	status = "okay";
+};
+
+&i2c19 {
+	status = "okay";
+};
+
+&i2c20 {
+	status = "okay";
+};
+
+&i2c21 {
+	status = "okay";
+};
+
+&i2c22 {
+	status = "okay";
+};
+
+&i2c23 {
+	status = "okay";
+};
+
+&i2c24 {
+	status = "okay";
+};
+
+&i2c25 {
+	status = "okay";
+};
+
+&i2c26 {
+	status = "okay";
+};
-- 
2.34.1