From: Nikhil Gautam <nikhilgtr@gmail.com>
To: linux-iio@vger.kernel.org
Cc: jic23@kernel.org, dlechner@baylibre.com, nuno.sa@analog.com,
andy@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Nikhil Gautam <nikhilgtr@gmail.com>
Subject: [PATCH v2 1/2] dt-bindings: iio: magnetometer: add Melexis MLX90393
Date: Thu, 18 Jun 2026 21:31:40 +0530 [thread overview]
Message-ID: <20260618160141.11409-2-nikhilgtr@gmail.com> (raw)
In-Reply-To: <20260618160141.11409-1-nikhilgtr@gmail.com>
Add devicetree bindings for the Melexis MLX90393
3-axis magnetometer and temperature sensor.
The device supports magnetic field and temperature
measurements over I2C and SPI interfaces.
This initial binding documents the I2C interface.
Signed-off-by: Nikhil Gautam <nikhilgtr@gmail.com>
---
.../iio/magnetometer/melexis,mlx90393.yaml | 55 +++++++++++++++++++
MAINTAINERS | 6 ++
2 files changed, 61 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/melexis,mlx90393.yaml
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/melexis,mlx90393.yaml b/Documentation/devicetree/bindings/iio/magnetometer/melexis,mlx90393.yaml
new file mode 100644
index 000000000000..79e7e4a124b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/melexis,mlx90393.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/melexis,mlx90393.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Melexis MLX90393 magnetometer sensor
+
+maintainers:
+ - Nikhil Gautam <nikhilgtr@gmail.com>
+
+description:
+ Melexis MLX90393 3-axis magnetometer and temperature sensor.
+
+properties:
+ compatible:
+ const: melexis,mlx90393
+
+ reg:
+ maxItems: 1
+
+ vdd-supply: true
+ vddio-supply: true
+
+ interrupts:
+ maxItems: 1
+
+ trigger-gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ magnetometer@c {
+ compatible = "melexis,mlx90393";
+ reg = <0x0c>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+
+ trigger-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index a92290fffa16..e9ddcd12feb5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -24926,6 +24926,12 @@ S: Maintained
F: Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml
F: drivers/iio/magnetometer/tmag5273.c
+MELEXIS MLX90393 MAGNETOMETER DRIVER
+M: Nikhil Gautam <nikhilgtr@gmail.com>
+L: linux-iio@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/iio/magnetometer/melexis,mlx90393.yaml
+
TI TRF7970A NFC DRIVER
M: Mark Greer <mgreer@animalcreek.com>
L: linux-wireless@vger.kernel.org
--
2.39.5
next prev parent reply other threads:[~2026-06-18 16:02 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-18 16:01 [PATCH v2 0/2] iio: magnetometer: add support for Melexis MLX90393 Nikhil Gautam
2026-06-18 16:01 ` Nikhil Gautam [this message]
2026-06-18 16:10 ` [PATCH v2 1/2] dt-bindings: iio: magnetometer: add " sashiko-bot
2026-06-18 16:01 ` [PATCH v2 2/2] iio: magnetometer: add support for " Nikhil Gautam
2026-06-18 16:15 ` sashiko-bot
2026-06-18 17:25 ` Uwe Kleine-König
2026-06-18 20:22 ` Nikhil Gautam
2026-06-18 19:26 ` Andy Shevchenko
2026-06-18 21:06 ` Nikhil Gautam
2026-06-18 18:59 ` [PATCH v2 0/2] " Andy Shevchenko
2026-06-18 20:26 ` Nikhil Gautam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260618160141.11409-2-nikhilgtr@gmail.com \
--to=nikhilgtr@gmail.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.