All of lore.kernel.org
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "SeongJae Park" <sj@kernel.org>
Cc: damon@lists.linux.dev
Subject: Re: [RFC PATCH v1.1 05/13] mm/damon/sysfs-schemes: use damon_nr_accesses_mvsum() for damo regions
Date: Sat, 20 Jun 2026 17:37:48 +0000	[thread overview]
Message-ID: <20260620173749.28BE01F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260620172244.90953-6-sj@kernel.org>

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] If a user configures `sample_interval=0` and `aggr_interval=0`, the time difference calculation inside `damon_nr_accesses_mvsum()` underflows, resulting in a huge garbage value for `nr_accesses`. This corrupts sysfs outputs and erratically influences DAMOS operations.
--

commit 2a77ab9c787a549b18af4699f5ffa8d3e4d60ca2
Author: SeongJae Park <sj@kernel.org>

mm/damon/sysfs-schemes: use damon_nr_accesses_mvsum() for damo regions

This commit modifies the DAMON sysfs interface to calculate region
accesses using damon_nr_accesses_mvsum() rather than a simple division.

> diff --git a/mm/damon/sysfs-schemes.c b/mm/damon/sysfs-schemes.c
> index 329cfd0bbe9f3..e648b0f809332 100644
> --- a/mm/damon/sysfs-schemes.c
> +++ b/mm/damon/sysfs-schemes.c
> @@ -159,7 +159,7 @@ struct damon_sysfs_scheme_region {
>  };
>  
>  static struct damon_sysfs_scheme_region *damon_sysfs_scheme_region_alloc(
> -		struct damon_region *region)
> +		struct damon_region *region, struct damon_ctx *ctx)
>  {
>  	struct damon_sysfs_scheme_region *sysfs_region = kmalloc_obj(*sysfs_region);
>  
> @@ -167,7 +167,7 @@ static struct damon_sysfs_scheme_region *damon_sysfs_scheme_region_alloc(
>  		return NULL;
>  	sysfs_region->kobj = (struct kobject){};
>  	sysfs_region->ar = region->ar;
> -	sysfs_region->nr_accesses = region->nr_accesses_bp / 10000;
> +	sysfs_region->nr_accesses = damon_nr_accesses_mvsum(region, ctx);

[Severity: High]
Could this lead to an unsigned integer underflow if a user configures
both sample_us and aggr_us to 0 via sysfs?

If a user configures sample_interval=0 and aggr_interval=0, the
intervals bypass the validation in damon_set_attrs(). Inside kdamond_fn(),
ctx->next_aggregation_sis is updated by adding 0 and never advances,
but ctx->passed_sample_intervals continues to increment on every loop
iteration.

When damon_nr_accesses_mvsum() is called, it calculates the difference:

mm/damon/core.c:damon_nr_accesses_mvsum() {
        ...
        left_window = ctx->next_aggregation_sis - ctx->passed_sample_intervals;
        ...
}

Because ctx->passed_sample_intervals quickly exceeds
ctx->next_aggregation_sis, does this subtraction result in an unsigned
integer underflow?

If left_window becomes a massive value, it appears it would propagate
through mult_frac() and damon_mvsum() to yield a garbage value for
nr_accesses. Since __damos_valid_target() evaluates scheme criteria
using this value, could this cause DAMON to act on wildly inaccurate
access scores and disrupt system stability?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260620172244.90953-1-sj@kernel.org?part=5

  reply	other threads:[~2026-06-20 17:37 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-20 17:22 [RFC PATCH v1.1 00/13] mm/damon: optimize out nr_accesses_bp SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 01/13] mm/damon: introduce damon_nr_accesses_mvsum() SeongJae Park
2026-06-20 17:36   ` sashiko-bot
2026-06-20 17:39     ` SeongJae Park
2026-06-20 17:41       ` SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 02/13] mm/damon/tests/core-kunit: test damon_mvsum() SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 03/13] mm/damon/core: use damon_nr_accesses_mvsum() in __damos_valid_target() SeongJae Park
2026-06-20 17:41   ` sashiko-bot
2026-06-20 18:07     ` SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 04/13] mm/damon/core: use damon_nr_accesses_mvsum() for damos region tracing SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 05/13] mm/damon/sysfs-schemes: use damon_nr_accesses_mvsum() for damo regions SeongJae Park
2026-06-20 17:37   ` sashiko-bot [this message]
2026-06-20 18:19     ` SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 06/13] mm/damon/core: remove damon_warn_fix_nr_accesses_corruption() SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 07/13] mm/damon/core: remove damon_verify_reset_aggregated() SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 08/13] mm/damon/core: remove damon_verify_merge_regions_of() SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 09/13] mm/damon/tests/core-kunit: remove nr_accesses_bp setup and tests SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 10/13] selftests/damon/drgn_dump_damon_status: do not dump nr_accesses_bp SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 11/13] mm/damon/core: remove nr_accesses_bp setups and updates SeongJae Park
2026-06-20 17:34   ` sashiko-bot
2026-06-20 17:45     ` SeongJae Park
2026-06-20 18:20       ` SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 12/13] mm/damon/core: remove damon_moving_sum() and its unit test SeongJae Park
2026-06-20 17:35   ` sashiko-bot
2026-06-20 17:47     ` SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 13/13] mm/damon: remove damon_region->nr_accesses_bp SeongJae Park

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260620173749.28BE01F000E9@smtp.kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=damon@lists.linux.dev \
    --cc=sashiko-reviews@lists.linux.dev \
    --cc=sj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.