[PATCH] clk: palmas: unprepare clock on provider registration failure

[Myeonghun Pak <mhun512@gmail.com>]

palmas_clks_init_configure() prepares the clock when an external control
pin is configured.  If the subsequent of_clk_add_hw_provider() call fails,
palmas_clks_probe() returns the error without dropping that prepare
reference.

Unprepare the clock on that error path when external control is active, so
the probe failure path balances the successful clk_prepare().

This issue was identified during our ongoing static-analysis research while
reviewing kernel code.

Fixes: 942d1d674931 ("clk: Add driver for Palmas clk32kg and clk32kgaudio clocks")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>

---
 drivers/clk/clk-palmas.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk-palmas.c b/drivers/clk/clk-palmas.c
index 39049f62db..ab9df2eedb 100644
--- a/drivers/clk/clk-palmas.c
+++ b/drivers/clk/clk-palmas.c
@@ -265,8 +265,11 @@ static int palmas_clks_probe(struct platform_device *pdev)
 	}
 
 	ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, &cinfo->hw);
-	if (ret < 0)
+	if (ret < 0) {
 		dev_err(&pdev->dev, "Fail to add clock driver, %d\n", ret);
+		if (cinfo->ext_control_pin)
+			clk_unprepare(cinfo->hw.clk);
+	}
 	return ret;
 }
 
-- 
2.47.1