From: Myeonghun Pak <mhun512@gmail.com>
To: Sean Wang <sean.wang@mediatek.com>, Vinod Koul <vkoul@kernel.org>,
Frank Li <Frank.Li@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>
Cc: dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
Myeonghun Pak <mhun512@gmail.com>, Ijae Kim <ae878000@gmail.com>
Subject: [PATCH] dmaengine: mediatek: hsdma: fix runtime PM leak on init failure
Date: Wed, 24 Jun 2026 17:16:38 +0900 [thread overview]
Message-ID: <20260624081701.19358-1-mhun512@gmail.com> (raw)
mtk_hsdma_hw_init() enables runtime PM and gets a runtime PM reference
before enabling the HSDMA clock. It currently ignores failures from
pm_runtime_get_sync(); if runtime resume fails, the usage count remains
held. If clk_prepare_enable() then fails, runtime PM is left enabled with
the usage count held.
Use pm_runtime_resume_and_get() so resume failures do not leak the usage
count, and unwind runtime PM when clk_prepare_enable() fails.
The probe path also ignores the return value from mtk_hsdma_hw_init(), so a
failed hardware init can continue as a successful probe. Propagate
mtk_hsdma_hw_init() failures from probe, while keeping a separate unwind
label so mtk_hsdma_hw_deinit() is only called after hardware init succeeds.
Fixes: 548c4597e984 ("dmaengine: mediatek: Add MediaTek High-Speed DMA controller for MT7622 and MT7623 SoC")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
---
drivers/dma/mediatek/mtk-hsdma.c | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/dma/mediatek/mtk-hsdma.c b/drivers/dma/mediatek/mtk-hsdma.c
index a43412ff5e..987e5274fc 100644
--- a/drivers/dma/mediatek/mtk-hsdma.c
+++ b/drivers/dma/mediatek/mtk-hsdma.c
@@ -849,16 +849,25 @@ static int mtk_hsdma_hw_init(struct mtk_hsdma_device *hsdma)
int err;
pm_runtime_enable(hsdma2dev(hsdma));
- pm_runtime_get_sync(hsdma2dev(hsdma));
+ err = pm_runtime_resume_and_get(hsdma2dev(hsdma));
+ if (err < 0)
+ goto err_disable_pm;
err = clk_prepare_enable(hsdma->clk);
if (err)
- return err;
+ goto err_put_pm;
mtk_dma_write(hsdma, MTK_HSDMA_INT_ENABLE, 0);
mtk_dma_write(hsdma, MTK_HSDMA_GLO, MTK_HSDMA_GLO_DEFAULT);
return 0;
+
+err_put_pm:
+ pm_runtime_put_sync(hsdma2dev(hsdma));
+err_disable_pm:
+ pm_runtime_disable(hsdma2dev(hsdma));
+
+ return err;
}
static int mtk_hsdma_hw_deinit(struct mtk_hsdma_device *hsdma)
@@ -983,7 +992,9 @@ static int mtk_hsdma_probe(struct platform_device *pdev)
goto err_unregister;
}
- mtk_hsdma_hw_init(hsdma);
+ err = mtk_hsdma_hw_init(hsdma);
+ if (err)
+ goto err_free;
err = devm_request_irq(&pdev->dev, hsdma->irq,
mtk_hsdma_irq, 0,
@@ -991,7 +1002,7 @@ static int mtk_hsdma_probe(struct platform_device *pdev)
if (err) {
dev_err(&pdev->dev,
"request_irq failed with err %d\n", err);
- goto err_free;
+ goto err_deinit;
}
platform_set_drvdata(pdev, hsdma);
@@ -1000,8 +1011,9 @@ static int mtk_hsdma_probe(struct platform_device *pdev)
return 0;
-err_free:
+err_deinit:
mtk_hsdma_hw_deinit(hsdma);
+err_free:
of_dma_controller_free(pdev->dev.of_node);
err_unregister:
dma_async_device_unregister(dd);
--
2.47.1
next reply other threads:[~2026-06-24 8:17 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-24 8:16 Myeonghun Pak [this message]
2026-06-24 8:30 ` [PATCH] dmaengine: mediatek: hsdma: fix runtime PM leak on init failure sashiko-bot
2026-06-25 16:03 ` Frank Li
2026-08-04 15:39 ` [PATCH v2 RESEND] " Myeonghun Pak
2026-08-04 15:56 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260624081701.19358-1-mhun512@gmail.com \
--to=mhun512@gmail.com \
--cc=Frank.Li@kernel.org \
--cc=ae878000@gmail.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=dmaengine@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=sean.wang@mediatek.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.