[PATCH v3 06/12] gpu: nova-core: gsp: fold TU102 unload bundle construction into HAL method

[Alexandre Courbot <acourbot@nvidia.com>]

The construction of the unload bundle is currently a bit convoluted and
could be done in one function instead of two.

Additionally, turn that function into a method of `Tu102`. A following
patch will turn the "use FWSEC bootloader" property into a flag of the
TU102 HAL itself, and making this a method will allow the code to access
it instead of querying `Chipset`.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
 drivers/gpu/nova-core/gsp/hal/tu102.rs | 96 ++++++++++++++++------------------
 1 file changed, 45 insertions(+), 51 deletions(-)

diff --git a/drivers/gpu/nova-core/gsp/hal/tu102.rs b/drivers/gpu/nova-core/gsp/hal/tu102.rs
index d669ce7625a8..22b4927cbaa6 100644
--- a/drivers/gpu/nova-core/gsp/hal/tu102.rs
+++ b/drivers/gpu/nova-core/gsp/hal/tu102.rs
@@ -56,23 +56,6 @@ enum FwsecUnloadFirmware {
 }
 
 impl FwsecUnloadFirmware {
-    /// Loads the FWSEC SB firmware, as well as its bootloader if `chipset` requires it.
-    fn new(
-        dev: &device::Device<device::Bound>,
-        bar: Bar0<'_>,
-        chipset: Chipset,
-        bios: &Vbios,
-        gsp_falcon: &Falcon<GspEngine>,
-    ) -> Result<Self> {
-        let fwsec_sb = FwsecFirmware::new(dev, gsp_falcon, bar, bios, FwsecCommand::Sb)?;
-
-        Ok(if chipset.needs_fwsec_bootloader() {
-            Self::WithBl(FwsecFirmwareWithBl::new(fwsec_sb, dev, chipset)?)
-        } else {
-            Self::WithoutBl(fwsec_sb)
-        })
-    }
-
     /// Runs the FWSEC SB firmware.
     fn run(
         &self,
@@ -94,35 +77,6 @@ struct Sec2UnloadBundle {
     booter_unloader: BooterFirmware,
 }
 
-impl Sec2UnloadBundle {
-    /// Load and prepare the resources required to properly reset the GSP after it has been stopped.
-    fn build(
-        dev: &device::Device<device::Bound>,
-        bar: Bar0<'_>,
-        chipset: Chipset,
-        bios: &Vbios,
-        gsp_falcon: &Falcon<GspEngine>,
-        sec2_falcon: &Falcon<Sec2>,
-    ) -> Result<KBox<dyn UnloadBundle>> {
-        KBox::new(
-            Self {
-                fwsec_sb: FwsecUnloadFirmware::new(dev, bar, chipset, bios, gsp_falcon)?,
-                booter_unloader: BooterFirmware::new(
-                    dev,
-                    BooterKind::Unloader,
-                    chipset,
-                    FIRMWARE_VERSION,
-                    sec2_falcon,
-                    bar,
-                )?,
-            },
-            GFP_KERNEL,
-        )
-        .map(|b| b as KBox<dyn UnloadBundle>)
-        .map_err(Into::into)
-    }
-}
-
 impl UnloadBundle for Sec2UnloadBundle {
     fn run(&self, ctx: &GspBootContext<'_>) -> Result {
         let dev = ctx.dev();
@@ -261,6 +215,47 @@ fn run_fwsec_frts(
 
 struct Tu102;
 
+impl Tu102 {
+    /// Load and prepare the resources required to properly reset the GSP after it has been stopped.
+    fn build_unload_bundle(
+        &self,
+        dev: &device::Device<device::Bound>,
+        bar: Bar0<'_>,
+        chipset: Chipset,
+        bios: &Vbios,
+        gsp_falcon: &Falcon<GspEngine>,
+        sec2_falcon: &Falcon<Sec2>,
+    ) -> Result<crate::gsp::UnloadBundle> {
+        // Load the FWSEC SB firmware, as well as its bootloader if required.
+        let fwsec_sb = FwsecFirmware::new(dev, gsp_falcon, bar, bios, FwsecCommand::Sb).and_then(
+            |fwsec_sb| {
+                Ok(if chipset.needs_fwsec_bootloader() {
+                    FwsecUnloadFirmware::WithBl(FwsecFirmwareWithBl::new(fwsec_sb, dev, chipset)?)
+                } else {
+                    FwsecUnloadFirmware::WithoutBl(fwsec_sb)
+                })
+            },
+        )?;
+
+        KBox::new(
+            Sec2UnloadBundle {
+                fwsec_sb,
+                booter_unloader: BooterFirmware::new(
+                    dev,
+                    BooterKind::Unloader,
+                    chipset,
+                    FIRMWARE_VERSION,
+                    sec2_falcon,
+                    bar,
+                )?,
+            },
+            GFP_KERNEL,
+        )
+        .map(|b| crate::gsp::UnloadBundle(b))
+        .map_err(Into::into)
+    }
+}
+
 impl GspHal for Tu102 {
     fn boot(
         &self,
@@ -281,11 +276,10 @@ fn boot(
         //
         // If the unload bundle creation fails, the GPU will need to be reset before the driver can
         // be probed again.
-        let unload_bundle =
-            Sec2UnloadBundle::build(dev, bar, chipset, &bios, gsp_falcon, sec2_falcon)
-                .inspect_err(|e| dev_warn!(dev, "Failed to prepare unload firmware: {:?}\n", e))
-                .ok()
-                .map(crate::gsp::UnloadBundle);
+        let unload_bundle = self
+            .build_unload_bundle(dev, bar, chipset, &bios, gsp_falcon, sec2_falcon)
+            .inspect_err(|e| dev_warn!(dev, "Failed to prepare unload firmware: {:?}\n", e))
+            .ok();
 
         // Run the unload bundle to try and recover the GSP if an error occurs.
         let unload_guard = ScopeGuard::new_with_data(unload_bundle, |unload_bundle| {

-- 
2.54.0