[PATCH v2 3/3] arm64: dts: qcom: sc8280xp-x13s: Use predefined MCLK pinctrl

[Pengyu Luo <mitltlatltl@gmail.com>]

Now that the predefined MCLK pinctrl configuration is available in the
sc8280xp SoC DTSI, switch the ThinkPad X13s to use it. Drop the local,
duplicate MCLK pin definition from the camera pinctrl node.

Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
---
 .../boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 3ddd44e16e67..5d652be69e44 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -674,8 +674,9 @@ camera@10 {
 		reg = <0x10>;
 
 		reset-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&cam_rgb_default>, <&cam_mclk3_default>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&cam_rgb_default>;
 
 		leds = <&privacy_led>;
 		led-names = "privacy";
@@ -1552,13 +1553,6 @@ cam_indicator_en: cam-indicator-en-state {
 	};
 
 	cam_rgb_default: cam-rgb-default-state {
-		mclk-pins {
-			pins = "gpio17";
-			function = "cam_mclk";
-			drive-strength = <6>;
-			bias-disable;
-		};
-
 		sc-rgb-xshut-n-pins {
 			pins = "gpio15";
 			function = "gpio";
-- 
2.54.0