[PATCH] fbdev: tdfxfb: fix PCI enable cleanup with pcim_enable_device()

[Myeonghun Pak <mhun512@gmail.com>]

tdfxfb_probe() enables the PCI device with pci_enable_device(), but
several failure paths after that point return without disabling it. The
framebuffer_alloc() failure path returns -ENOMEM directly, and the later
shared out_err path releases the framebuffer and returns -ENXIO without
balancing the PCI enable state.

The successful probe path has the same imbalance because tdfxfb_remove()
releases the framebuffer, mappings and regions, but never calls
pci_disable_device().

Use pcim_enable_device() so the PCI device is disabled automatically on
probe failure and driver detach.

This issue was identified during our ongoing static-analysis research while
reviewing kernel code.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
---
 drivers/video/fbdev/tdfxfb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/tdfxfb.c b/drivers/video/fbdev/tdfxfb.c
index cc6a074f3165..7f7c268c3b0d 100644
--- a/drivers/video/fbdev/tdfxfb.c
+++ b/drivers/video/fbdev/tdfxfb.c
@@ -1385,7 +1385,7 @@ static int tdfxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (err)
 		return err;
 
-	err = pci_enable_device(pdev);
+	err = pcim_enable_device(pdev);
 	if (err) {
 		printk(KERN_ERR "tdfxfb: Can't enable pdev: %d\n", err);
 		return err;
-- 
2.47.1