From: Imre Deak <imre.deak@intel.com>
To: <intel-gfx@lists.freedesktop.org>, <intel-xe@lists.freedesktop.org>
Subject: [PATCH v2 18/34] drm/i915/dp: Iterate configurations via link_caps for SST DSC
Date: Wed, 1 Jul 2026 18:31:47 +0300 [thread overview]
Message-ID: <20260701153204.4124150-19-imre.deak@intel.com> (raw)
In-Reply-To: <20260701153204.4124150-1-imre.deak@intel.com>
Use the link caps configuration iterator for DP SST link configuration
computation for DSC mode. This is a step towards unifying configuration
selection and iteration across connector types and between compute and
fallback paths.
The iteration preserves the DP SST connector rate/lane ordering used by
the current code.
This also allows removing the now unused common rate count helper.
v2:
- Rebase on changes using a filter object instead of a mask of
configuration indices.
- Rebase on changes using an iteration object.
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/display/intel_dp.c | 92 +++++++++----------
.../gpu/drm/i915/display/intel_dp_link_caps.c | 5 -
.../gpu/drm/i915/display/intel_dp_link_caps.h | 1 -
3 files changed, 44 insertions(+), 54 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 108298186d121..c6920afb50902 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -1988,60 +1988,56 @@ static int dsc_compute_link_config(struct intel_dp *intel_dp,
const struct link_config_limits *limits,
int dsc_bpp_x16)
{
- struct intel_dp_link_caps *link_caps = intel_dp->link.caps;
const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
- int link_rate, lane_count;
- int i;
+ struct intel_connector *connector = to_intel_connector(conn_state->connector);
+ struct intel_dp_link_caps *link_caps = intel_dp->link.caps;
+ struct intel_dp_link_caps_order order =
+ intel_dp_link_caps_connector_compute_order(connector);
+ struct intel_dp_link_config link_config;
+ struct intel_dp_link_caps_iter iter;
- for (i = 0; i < intel_dp_link_caps_num_common_rates(intel_dp->link.caps); i++) {
- link_rate = intel_dp_common_rate(link_caps, i);
- if (link_rate < limits->min_rate || link_rate > limits->max_rate)
- continue;
+ intel_dp_link_caps_iter_start(&iter, link_caps, order, limits->link_config_filter);
+ for_each_dp_link_config(&iter, &link_config) {
+ /*
+ * FIXME: intel_dp_mtp_tu_compute_config() requires
+ * ->lane_count and ->port_clock set before we know
+ * they'll work. If we end up failing altogether,
+ * they'll remain in crtc state. This shouldn't matter,
+ * as we'd then bail out from compute config, but it's
+ * just ugly.
+ */
+ pipe_config->lane_count = link_config.lane_count;
+ pipe_config->port_clock = link_config.rate;
- for (lane_count = limits->min_lane_count;
- lane_count <= limits->max_lane_count;
- lane_count <<= 1) {
+ if (drm_dp_is_uhbr_rate(link_config.rate)) {
+ int ret;
- /*
- * FIXME: intel_dp_mtp_tu_compute_config() requires
- * ->lane_count and ->port_clock set before we know
- * they'll work. If we end up failing altogether,
- * they'll remain in crtc state. This shouldn't matter,
- * as we'd then bail out from compute config, but it's
- * just ugly.
- */
- pipe_config->lane_count = lane_count;
- pipe_config->port_clock = link_rate;
+ ret = intel_dp_mtp_tu_compute_config(intel_dp,
+ pipe_config,
+ conn_state,
+ dsc_bpp_x16,
+ dsc_bpp_x16,
+ 0, true);
+ if (ret)
+ continue;
+ } else {
+ unsigned long bw_overhead_flags =
+ pipe_config->fec_enable ? DRM_DP_BW_OVERHEAD_FEC : 0;
+ int line_slice_count =
+ intel_dsc_line_slice_count(&pipe_config->dsc.slice_config);
- if (drm_dp_is_uhbr_rate(link_rate)) {
- int ret;
-
- ret = intel_dp_mtp_tu_compute_config(intel_dp,
- pipe_config,
- conn_state,
- dsc_bpp_x16,
- dsc_bpp_x16,
- 0, true);
- if (ret)
- continue;
- } else {
- unsigned long bw_overhead_flags =
- pipe_config->fec_enable ? DRM_DP_BW_OVERHEAD_FEC : 0;
- int line_slice_count =
- intel_dsc_line_slice_count(&pipe_config->dsc.slice_config);
-
- if (!is_bw_sufficient_for_dsc_config(intel_dp,
- link_rate, lane_count,
- adjusted_mode->crtc_clock,
- adjusted_mode->hdisplay,
- line_slice_count,
- dsc_bpp_x16,
- bw_overhead_flags))
- continue;
- }
-
- return 0;
+ if (!is_bw_sufficient_for_dsc_config(intel_dp,
+ link_config.rate,
+ link_config.lane_count,
+ adjusted_mode->crtc_clock,
+ adjusted_mode->hdisplay,
+ line_slice_count,
+ dsc_bpp_x16,
+ bw_overhead_flags))
+ continue;
}
+
+ return 0;
}
return -EINVAL;
diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_caps.c b/drivers/gpu/drm/i915/display/intel_dp_link_caps.c
index 8dfb7f4f703bc..4ce35b76afee6 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_link_caps.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_link_caps.c
@@ -273,11 +273,6 @@ int intel_dp_max_common_rate(struct intel_dp_link_caps *link_caps)
return intel_dp_common_rate(link_caps, link_caps->num_rates - 1);
}
-int intel_dp_link_caps_num_common_rates(struct intel_dp_link_caps *link_caps)
-{
- return link_caps->num_rates;
-}
-
void intel_dp_link_caps_print_common_rates(struct intel_dp_link_caps *link_caps)
{
struct intel_display *display = to_intel_display(link_caps->dp);
diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_caps.h b/drivers/gpu/drm/i915/display/intel_dp_link_caps.h
index 07002d745d384..3c7e6c8d1ab1d 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_link_caps.h
+++ b/drivers/gpu/drm/i915/display/intel_dp_link_caps.h
@@ -124,7 +124,6 @@ int intel_dp_common_len_rate_limit(struct intel_dp_link_caps *link_caps,
int intel_dp_common_rate(struct intel_dp_link_caps *link_caps, int index);
int intel_dp_link_caps_common_rate_idx(struct intel_dp_link_caps *link_caps, int rate);
int intel_dp_max_common_rate(struct intel_dp_link_caps *link_caps);
-int intel_dp_link_caps_num_common_rates(struct intel_dp_link_caps *link_caps);
void intel_dp_link_caps_print_common_rates(struct intel_dp_link_caps *link_caps);
--
2.49.1
next prev parent reply other threads:[~2026-07-01 15:33 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-01 15:31 [PATCH v2 00/34] drm/i915/dp_link: Unify modeset/fallback config selection Imre Deak
2026-07-01 15:31 ` [PATCH v2 01/34] drm/i915/doc: Document DP link capabilities Imre Deak
2026-07-02 5:17 ` Kandpal, Suraj
2026-07-01 15:31 ` [PATCH v2 02/34] drm/i915/dp_link_caps: Factor out helper to get link config by index Imre Deak
2026-07-03 2:55 ` Kandpal, Suraj
2026-07-01 15:31 ` [PATCH v2 03/34] drm/i915/dp_link_caps: Add support for link rate, lane count iteration orders Imre Deak
2026-07-07 4:06 ` Kandpal, Suraj
2026-07-01 15:31 ` [PATCH v2 04/34] drm/i915/dp_link_caps: Add link configuration iterator Imre Deak
2026-07-07 4:17 ` Kandpal, Suraj
2026-07-01 15:31 ` [PATCH v2 05/34] drm/i915/dp_link_caps: Add helper to get iteration order for a connector Imre Deak
2026-07-01 15:31 ` [PATCH v2 06/34] drm/i915/dp_link_caps: Validate max link limits Imre Deak
2026-07-06 8:17 ` Kandpal, Suraj
2026-07-01 15:31 ` [PATCH v2 07/34] drm/i915/dp_link_caps: Add filter for enabled link configurations Imre Deak
2026-07-06 8:08 ` Kandpal, Suraj
2026-07-01 15:31 ` [PATCH v2 08/34] drm/i915/dp_link_caps: Re-enable link configurations after a link reset Imre Deak
2026-07-06 8:09 ` Kandpal, Suraj
2026-07-01 15:31 ` [PATCH v2 09/34] drm/i915/dp_link_caps: Re-enable link configurations after sink caps change Imre Deak
2026-07-06 8:14 ` Kandpal, Suraj
2026-07-01 15:31 ` [PATCH v2 10/34] drm/i915/dp_link_caps: Drop noupdate postfix from max link limit set helpers Imre Deak
2026-07-06 8:16 ` Kandpal, Suraj
2026-07-01 15:31 ` [PATCH v2 11/34] drm/i915/dp_link_caps: Add debugfs entry showing allowed configurations Imre Deak
2026-07-02 10:35 ` Luca Coelho
2026-07-01 15:31 ` [PATCH v2 12/34] drm/i915/dp: Add link configuration filter for modeset computation Imre Deak
2026-07-02 11:03 ` Luca Coelho
2026-07-06 7:52 ` Imre Deak
2026-07-01 15:31 ` [PATCH v2 13/34] drm/i915/dp_link_caps: Add helper to query max BW link configuration Imre Deak
2026-07-02 11:06 ` Luca Coelho
2026-07-01 15:31 ` [PATCH v2 14/34] drm/i915/dp: Query max BW config via link_caps during mode validation Imre Deak
2026-07-02 11:22 ` Luca Coelho
2026-07-01 15:31 ` [PATCH v2 15/34] drm/i915/dp_tunnel: Query max BW config via link_caps for BW computation Imre Deak
2026-07-02 11:23 ` Luca Coelho
2026-07-01 15:31 ` [PATCH v2 16/34] drm/i915/dp_test: Use link caps for compliance link configs Imre Deak
2026-07-02 16:19 ` Luca Coelho
2026-07-01 15:31 ` [PATCH v2 17/34] drm/i915/dp: Iterate configurations via link_caps for SST non-DSC Imre Deak
2026-07-06 10:42 ` Luca Coelho
2026-07-01 15:31 ` Imre Deak [this message]
2026-07-06 10:48 ` [PATCH v2 18/34] drm/i915/dp: Iterate configurations via link_caps for SST DSC Luca Coelho
2026-07-01 15:31 ` [PATCH v2 19/34] drm/i915/dp: Use link caps for eDP DSC config selection Imre Deak
2026-07-06 10:49 ` Luca Coelho
2026-07-06 15:03 ` Imre Deak
2026-07-01 15:31 ` [PATCH v2 20/34] drm/i915/dp_mst: Use link caps for non-DSC " Imre Deak
2026-07-06 16:45 ` Luca Coelho
2026-07-01 15:31 ` [PATCH v2 21/34] drm/i915/dp_mst: Use link caps for MST DSC " Imre Deak
2026-07-01 15:31 ` [PATCH v2 22/34] drm/i915/dp: Remove min/max link config limits Imre Deak
2026-07-01 15:31 ` [PATCH v2 23/34] drm/i915/dp_link_training: Reset the max link limits in the fallback code Imre Deak
2026-07-01 15:31 ` [PATCH v2 24/34] drm/i915/dp_link_training: Use config iterator for fallback Imre Deak
2026-07-01 15:31 ` [PATCH v2 25/34] drm/i915/dp_link_training: Disable failed config during fallback Imre Deak
2026-07-01 15:31 ` [PATCH v2 26/34] drm/i915/kunit: Enable KUnit tests Imre Deak
2026-07-04 10:48 ` Michał Grzelak
2026-07-06 7:07 ` Imre Deak
2026-07-01 15:31 ` [PATCH v2 27/34] drm/i915/kunit: Add DP link test stub Imre Deak
2026-07-04 10:48 ` Michał Grzelak
2026-07-01 15:31 ` [PATCH v2 28/34] drm/xe/kunit: Add display test config Imre Deak
2026-07-04 10:49 ` Michał Grzelak
2026-07-01 15:31 ` [PATCH v2 29/34] drm/xe/kunit: Build DP link display tests Imre Deak
2026-07-04 10:49 ` Michał Grzelak
2026-07-06 7:14 ` Imre Deak
2026-07-01 15:31 ` [PATCH v2 30/34] drm/i915/kunit: Setup DP link test context Imre Deak
2026-07-04 10:50 ` Michał Grzelak
2026-07-06 7:18 ` Imre Deak
2026-07-01 15:32 ` [PATCH v2 31/34] drm/i915/kunit: Export link training and caps funcs for testing Imre Deak
2026-07-04 10:52 ` Michał Grzelak
2026-07-01 15:32 ` [PATCH v2 32/34] drm/i915/kunit: DP link: add baseline fixed table reference test Imre Deak
2026-07-04 10:51 ` Michał Grzelak
2026-07-06 7:31 ` Imre Deak
2026-07-01 15:32 ` [PATCH v2 33/34] drm/i915/kunit: DP link: add update config tests Imre Deak
2026-07-04 10:51 ` Michał Grzelak
2026-07-06 7:46 ` Imre Deak
2026-07-01 15:32 ` [PATCH v2 34/34] drm/i915/kunit: DP link: add fallback tests Imre Deak
2026-07-04 10:51 ` Michał Grzelak
2026-07-06 7:51 ` Imre Deak
2026-07-01 16:39 ` ✗ CI.checkpatch: warning for drm/i915/dp_link: Unify modeset/fallback config selection Patchwork
2026-07-01 16:40 ` ✓ CI.KUnit: success " Patchwork
2026-07-01 16:59 ` ✗ CI.checksparse: warning " Patchwork
2026-07-01 17:43 ` ✓ Xe.CI.BAT: success " Patchwork
2026-07-02 1:54 ` ✓ i915.CI.BAT: " Patchwork
2026-07-02 12:25 ` ✓ Xe.CI.FULL: " Patchwork
2026-07-02 19:43 ` ✓ i915.CI.Full: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260701153204.4124150-19-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.