[PATCH 0/4] hw/arm/fsl-imx8mp: Add inital FlexCAN support

[Bernhard Beschow <shentey@gmail.com>]

Now that FlexCAN emulation is on its way into master [1], let's add it to
imx8mp-evk as well. While the real i.MX8M Plus supports CAN FD which isn't
emulated yet, the non-FD mode works well under Linux: It is possible to use
`cangen` and `candump` either way on the host and on the guest, as described in
docs/system/devices/can.rst.

This series consists of four patches where the first three are preparations.
The last patch integrates FlexCAN into the i.MX8M Plus SoC and EVK board.

It would be nice if this series could make it into 11.1.

Based-on: cover.1782140438.git.matyas.bobek@gmail.com

[1]
https://lore.kernel.org/qemu-devel/20260629120032.1645265-35-peter.
maydell@linaro.org/

Bernhard Beschow (4):
  hw/net/can/flexcan: Subclass TYPE_CAN_FLEXCAN
  hw/arm/imx8mp-evk: Open code DEFINE_MACHINE_AARCH64
  hw/arm/imx8mp-evk: Introduce FslImx8mpEvkState
  hw/arm: Add basic FlexCAN3 support to TYPE_FSL_IMX8MP and imx8mp-evk

 docs/system/arm/imx8m.rst   |  1 +
 include/hw/arm/fsl-imx8mp.h |  8 +++++
 include/hw/net/flexcan.h    |  4 ++-
 hw/arm/fsl-imx6.c           |  2 +-
 hw/arm/fsl-imx8mp.c         | 37 +++++++++++++++++++++
 hw/arm/imx8mp-evk.c         | 64 ++++++++++++++++++++++++++++++-------
 hw/misc/imx8mp_ccm.c        |  3 ++
 hw/net/can/flexcan.c        | 61 +++++++++++++++++++++++++++--------
 hw/arm/Kconfig              |  1 +
 9 files changed, 154 insertions(+), 27 deletions(-)

-- 
2.54.0