All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christian Marangi <ansuelsmth@gmail.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	Daniel Lezcano <daniel.lezcano@kernel.org>,
	Zhang Rui <rui.zhang@intel.com>,
	Lukasz Luba <lukasz.luba@arm.com>,
	Christian Marangi <ansuelsmth@gmail.com>,
	Lorenzo Bianconi <lorenzo@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org
Subject: [PATCH v6 4/7] thermal/drivers: airoha: Generalize probe function
Date: Thu,  2 Jul 2026 11:48:32 +0200	[thread overview]
Message-ID: <20260702094846.17325-5-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20260702094846.17325-1-ansuelsmth@gmail.com>

In preparation for support of Airoha AN7583, generalize the probe
function to address for the 2 SoC differece.

Implement a match_data struct where it's possible to define a more
specific probe and post_probe function and specific thermal ops and
pllrg protect value.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/thermal/airoha_thermal.c | 102 +++++++++++++++++++++++--------
 1 file changed, 75 insertions(+), 27 deletions(-)

diff --git a/drivers/thermal/airoha_thermal.c b/drivers/thermal/airoha_thermal.c
index b63893a8997a..ebb47ae5f2ce 100644
--- a/drivers/thermal/airoha_thermal.c
+++ b/drivers/thermal/airoha_thermal.c
@@ -198,12 +198,23 @@ struct airoha_thermal_priv {
 	struct regmap *chip_scu;
 	struct resource scu_adc_res;
 
+	u32 pllrg_protect;
+
 	struct thermal_zone_device *tz;
 	int init_temp;
 	int default_slope;
 	int default_offset;
 };
 
+struct airoha_thermal_soc_data {
+	u32 pllrg_protect;
+
+	const struct thermal_zone_device_ops *thdev_ops;
+	int (*probe)(struct platform_device *pdev,
+		     struct airoha_thermal_priv *priv);
+	int (*post_probe)(struct platform_device *pdev);
+};
+
 static int airoha_get_thermal_ADC(struct airoha_thermal_priv *priv)
 {
 	u32 val;
@@ -220,7 +231,8 @@ static void airoha_init_thermal_ADC_mode(struct airoha_thermal_priv *priv)
 	regmap_read(priv->chip_scu, EN7581_PLLRG_PROTECT, &pllrg);
 
 	/* Give access to thermal regs */
-	regmap_write(priv->chip_scu, EN7581_PLLRG_PROTECT, EN7581_SCU_THERMAL_PROTECT_KEY);
+	regmap_write(priv->chip_scu, EN7581_PLLRG_PROTECT,
+		     priv->pllrg_protect);
 	adc_mux = FIELD_PREP(EN7581_MUX_TADC, EN7581_SCU_THERMAL_MUX_DIODE1);
 	regmap_write(priv->chip_scu, EN7581_PWD_TADC, adc_mux);
 
@@ -228,7 +240,7 @@ static void airoha_init_thermal_ADC_mode(struct airoha_thermal_priv *priv)
 	regmap_write(priv->chip_scu, EN7581_PLLRG_PROTECT, pllrg);
 }
 
-static int airoha_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+static int en7581_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
 {
 	struct airoha_thermal_priv *priv = thermal_zone_device_priv(tz);
 	int min_value, max_value, avg_value, value;
@@ -253,7 +265,7 @@ static int airoha_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
 	return 0;
 }
 
-static int airoha_thermal_set_trips(struct thermal_zone_device *tz, int low,
+static int en7581_thermal_set_trips(struct thermal_zone_device *tz, int low,
 				    int high)
 {
 	struct airoha_thermal_priv *priv = thermal_zone_device_priv(tz);
@@ -290,12 +302,12 @@ static int airoha_thermal_set_trips(struct thermal_zone_device *tz, int low,
 	return 0;
 }
 
-static const struct thermal_zone_device_ops thdev_ops = {
-	.get_temp = airoha_thermal_get_temp,
-	.set_trips = airoha_thermal_set_trips,
+static const struct thermal_zone_device_ops en7581_thdev_ops = {
+	.get_temp = en7581_thermal_get_temp,
+	.set_trips = en7581_thermal_set_trips,
 };
 
-static irqreturn_t airoha_thermal_irq(int irq, void *data)
+static irqreturn_t en7581_thermal_irq(int irq, void *data)
 {
 	struct airoha_thermal_priv *priv = data;
 	enum thermal_notify_event event;
@@ -326,7 +338,7 @@ static irqreturn_t airoha_thermal_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static void airoha_thermal_setup_adc_val(struct device *dev,
+static void en7581_thermal_setup_adc_val(struct device *dev,
 					 struct airoha_thermal_priv *priv)
 {
 	u32 efuse_calib_info = 0;
@@ -357,7 +369,7 @@ static void airoha_thermal_setup_adc_val(struct device *dev,
 	}
 }
 
-static void airoha_thermal_setup_monitor(struct airoha_thermal_priv *priv)
+static void en7581_thermal_setup_monitor(struct airoha_thermal_priv *priv)
 {
 	/* Set measure mode */
 	regmap_write(priv->map, EN7581_TEMPMSRCTL0,
@@ -412,30 +424,26 @@ static void airoha_thermal_setup_monitor(struct airoha_thermal_priv *priv)
 		     FIELD_PREP(EN7581_ADC_POLL_INTVL, 146));
 }
 
-static const struct regmap_config airoha_thermal_regmap_config = {
+static const struct regmap_config en7581_thermal_regmap_config = {
 	.reg_bits		= 32,
 	.reg_stride		= 4,
 	.val_bits		= 32,
 };
 
-static int airoha_thermal_probe(struct platform_device *pdev)
+static int en7581_thermal_probe(struct platform_device *pdev,
+				struct airoha_thermal_priv *priv)
 {
-	struct airoha_thermal_priv *priv;
 	struct device_node *chip_scu_np;
 	struct device *dev = &pdev->dev;
 	void __iomem *base;
 	int irq, ret;
 
-	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
 	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
 	priv->map = devm_regmap_init_mmio(dev, base,
-					  &airoha_thermal_regmap_config);
+					  &en7581_thermal_regmap_config);
 	if (IS_ERR(priv->map))
 		return PTR_ERR(priv->map);
 
@@ -455,18 +463,55 @@ static int airoha_thermal_probe(struct platform_device *pdev)
 		return irq;
 
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
-					airoha_thermal_irq, IRQF_ONESHOT,
+					en7581_thermal_irq, IRQF_ONESHOT,
 					pdev->name, priv);
 	if (ret) {
 		dev_err(dev, "Can't get interrupt working.\n");
 		return ret;
 	}
 
-	airoha_thermal_setup_monitor(priv);
-	airoha_thermal_setup_adc_val(dev, priv);
+	en7581_thermal_setup_monitor(priv);
+	en7581_thermal_setup_adc_val(dev, priv);
+
+	return 0;
+}
+
+static int en7581_thermal_post_probe(struct platform_device *pdev)
+{
+	struct airoha_thermal_priv *priv = platform_get_drvdata(pdev);
+
+	/* Enable LOW and HIGH interrupt (if supported) */
+	regmap_write(priv->map, EN7581_TEMPMONINT,
+		     EN7581_HOFSINTEN0 | EN7581_LOFSINTEN0);
+
+	return 0;
+}
+
+static int airoha_thermal_probe(struct platform_device *pdev)
+{
+	const struct airoha_thermal_soc_data *soc_data;
+	struct airoha_thermal_priv *priv;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	soc_data = device_get_match_data(dev);
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->pllrg_protect = soc_data->pllrg_protect;
+
+	if (!soc_data->probe)
+		return -EINVAL;
+
+	ret = soc_data->probe(pdev, priv);
+	if (ret)
+		return ret;
 
 	/* register of thermal sensor and get info from DT */
-	priv->tz = devm_thermal_of_zone_register(dev, 0, priv, &thdev_ops);
+	priv->tz = devm_thermal_of_zone_register(dev, 0, priv,
+						 soc_data->thdev_ops);
 	if (IS_ERR(priv->tz)) {
 		dev_err(dev, "register thermal zone sensor failed\n");
 		return PTR_ERR(priv->tz);
@@ -474,15 +519,18 @@ static int airoha_thermal_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, priv);
 
-	/* Enable LOW and HIGH interrupt */
-	regmap_write(priv->map, EN7581_TEMPMONINT,
-		     EN7581_HOFSINTEN0 | EN7581_LOFSINTEN0);
-
-	return 0;
+	return soc_data->post_probe ? soc_data->post_probe(pdev) : 0;
 }
 
+static const struct airoha_thermal_soc_data en7581_data = {
+	.pllrg_protect = EN7581_SCU_THERMAL_PROTECT_KEY,
+	.thdev_ops = &en7581_thdev_ops,
+	.probe = &en7581_thermal_probe,
+	.post_probe = &en7581_thermal_post_probe,
+};
+
 static const struct of_device_id airoha_thermal_match[] = {
-	{ .compatible = "airoha,en7581-thermal" },
+	{ .compatible = "airoha,en7581-thermal", .data = &en7581_data },
 	{},
 };
 MODULE_DEVICE_TABLE(of, airoha_thermal_match);
-- 
2.53.0


  parent reply	other threads:[~2026-07-02  9:49 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-02  9:48 [PATCH v6 0/7] thermal/drivers: airoha: Add support for AN7583 Christian Marangi
2026-07-02  9:48 ` [PATCH v6 1/7] thermal/drivers: airoha: fix copy paste error on clamp_t low temp Christian Marangi
2026-07-02 10:00   ` sashiko-bot
2026-07-02  9:48 ` [PATCH v6 2/7] thermal/drivers: airoha: fix copy paste error for sen internal Christian Marangi
2026-07-02 10:07   ` sashiko-bot
2026-07-02  9:48 ` [PATCH v6 3/7] thermal/drivers: airoha: Convert to regmap API Christian Marangi
2026-07-02 10:16   ` sashiko-bot
2026-07-02  9:48 ` Christian Marangi [this message]
2026-07-02 10:35   ` [PATCH v6 4/7] thermal/drivers: airoha: Generalize probe function sashiko-bot
2026-07-02  9:48 ` [PATCH v6 5/7] thermal/drivers: airoha: Generalize get_thermal_ADC and set_mux function Christian Marangi
2026-07-02  9:48 ` [PATCH v6 6/7] dt-bindings: arm: airoha: Add the chip-scu node for AN7583 SoC Christian Marangi
2026-07-02 10:48   ` sashiko-bot
2026-07-02  9:48 ` [PATCH v6 7/7] thermal/drivers: airoha: Add support for AN7583 Thermal Sensor Christian Marangi
2026-07-02 11:04   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260702094846.17325-5-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel.lezcano@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=lorenzo@kernel.org \
    --cc=lukasz.luba@arm.com \
    --cc=rafael@kernel.org \
    --cc=robh@kernel.org \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.