From: kernel test robot <lkp@intel.com>
To: Rosen Penev <rosenp@gmail.com>
Cc: oe-kbuild-all@lists.linux.dev, linux-kernel@vger.kernel.org,
Florian Fainelli <florian.fainelli@broadcom.com>
Subject: arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: leds (gpio-leds): led-0:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
Date: Fri, 03 Jul 2026 04:25:53 +0200 [thread overview]
Message-ID: <202607030407.1DT5VDLb-lkp@intel.com> (raw)
tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
head: 87320be9f0d24fce67631b7eef919f0b79c3e45c
commit: 6b0cb7b34ba68425abb6b3174cca4a7ee031da6d ARM: dts: BCM5301X: EA9200: add LEDs
date: 3 months ago
config: arm-randconfig-2055 (https://download.01.org/0day-ci/archive/20260703/202607030407.1DT5VDLb-lkp@intel.com/config)
compiler: arm-linux-gnueabi-gcc (GCC) 12.5.0
dtschema: 2026.7.dev1+g2203c1720
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20260703/202607030407.1DT5VDLb-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Fixes: 6b0cb7b34ba6 ("ARM: dts: BCM5301X: EA9200: add LEDs")
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202607030407.1DT5VDLb-lkp@intel.com/
dtcheck warnings: (new ones prefixed by >>)
arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0.dtsi:10.18-19.5: Warning (avoid_unnecessary_addr_size): /nand-controller@18028000/nand@0: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" or "ranges" property
arch/arm/boot/dts/broadcom/bcm-ns.dtsi:24.28-47.4: Warning (unique_unit_address_if_enabled): /chipcommon-a-bus@18000000: duplicate unit-address (also used in node /axi@18000000)
arch/arm/boot/dts/broadcom/bcm-ns.dtsi:377.22-382.4: Warning (unique_unit_address_if_enabled): /mdio@18003000: duplicate unit-address (also used in node /mdio-mux@18003000)
arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: /axi@18000000: failed to match any schema with compatible: ['brcm,bus-axi']
arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: ethernet-switch@18007000 (brcm,bcm53012-srab): ports:port@8: 'phy-mode' is a required property
from schema $id: http://devicetree.org/schemas/net/dsa/brcm,b53.yaml
arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: ethernet-switch@18007000 (brcm,bcm53012-srab): Unevaluated properties are not allowed ('ports' was unexpected)
from schema $id: http://devicetree.org/schemas/net/dsa/brcm,b53.yaml
>> arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: leds (gpio-leds): led-0:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
'rfkill-none' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'netdev', 'none', 'rc-feedback', 'torch', 'usb-gadget', 'usb-host', 'usbport']
'rfkill-none' does not match '^cpu[0-9]*$'
'rfkill-none' does not match '^hci[0-9]+-power$'
'rfkill-none' does not match '^mmc[0-9]+$'
'rfkill-none' does not match '^phy[0-9]+tx$'
from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
reply other threads:[~2026-07-03 2:26 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202607030407.1DT5VDLb-lkp@intel.com \
--to=lkp@intel.com \
--cc=florian.fainelli@broadcom.com \
--cc=linux-kernel@vger.kernel.org \
--cc=oe-kbuild-all@lists.linux.dev \
--cc=rosenp@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.