[PATCH v5 5/5] arm64: dts: allwinner: sun55i: add thermal sensors

[Mikhail Kalashnikov <iuncuim@gmail.com>]

The A523 processor has two temperature controllers, THS0 and THS1.
THS0 has only one temperature sensor, which is located in the DRAM
controller.

THS1 does have 3 sensors:
ths1_0 - "big" cores
ths1_1 - "little" cores
ths1_2 - gpu

Add the thermal sensor configuration and the thermal zones.
Trips temperature, polling-delay and sustainable-power parameters are
derived from the manufacturer's BSP.

Signed-off-by: Mikhail Kalashnikov <iuncuim@gmail.com>
---
 .../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 160 ++++++++++++++++++
 1 file changed, 160 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
index ca6a16807..2ed00e7a7 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/reset/sun55i-a523-r-ccu.h>
 #include <dt-bindings/power/allwinner,sun55i-a523-ppu.h>
 #include <dt-bindings/power/allwinner,sun55i-a523-pck-600.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -26,6 +27,7 @@ cpu0: cpu@0 {
 			device_type = "cpu";
 			reg = <0x000>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@100 {
@@ -33,6 +35,7 @@ cpu1: cpu@100 {
 			device_type = "cpu";
 			reg = <0x100>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@200 {
@@ -40,6 +43,7 @@ cpu2: cpu@200 {
 			device_type = "cpu";
 			reg = <0x200>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@300 {
@@ -47,6 +51,7 @@ cpu3: cpu@300 {
 			device_type = "cpu";
 			reg = <0x300>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 		};
 
 		cpu4: cpu@400 {
@@ -54,6 +59,7 @@ cpu4: cpu@400 {
 			device_type = "cpu";
 			reg = <0x400>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 		};
 
 		cpu5: cpu@500 {
@@ -61,6 +67,7 @@ cpu5: cpu@500 {
 			device_type = "cpu";
 			reg = <0x500>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 		};
 
 		cpu6: cpu@600 {
@@ -68,6 +75,7 @@ cpu6: cpu@600 {
 			device_type = "cpu";
 			reg = <0x600>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 		};
 
 		cpu7: cpu@700 {
@@ -75,6 +83,7 @@ cpu7: cpu@700 {
 			device_type = "cpu";
 			reg = <0x700>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -355,6 +364,32 @@ gpadc: adc@2009000 {
 			status = "disabled";
 		};
 
+		ths1: thermal-sensor@2009400 {
+			compatible = "allwinner,sun55i-a523-ths1";
+			reg = <0x02009400 0x400>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_GPADC1>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration0>, <&ths_calibration1>;
+			nvmem-cell-names = "calibration",
+				     "calibration-second-part";
+			#thermal-sensor-cells = <1>;
+		};
+
+		ths0: thermal-sensor@200a000 {
+			compatible = "allwinner,sun55i-a523-ths0";
+			reg = <0x0200a000 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_GPADC0>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration0>, <&ths_calibration1>;
+			nvmem-cell-names = "calibration",
+				     "calibration-second-part";
+			#thermal-sensor-cells = <0>;
+		};
+
 		wdt: watchdog@2050000 {
 			compatible = "allwinner,sun55i-a523-wdt";
 			reg = <0x2050000 0x20>;
@@ -586,6 +621,14 @@ sid: efuse@3006000 {
 			reg = <0x03006000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			ths_calibration0: ths-calibration0@38 {
+				reg = <0x38 0x8>;
+			};
+
+			ths_calibration1: ths-calibration1@44 {
+				reg = <0x44 0x8>;
+			};
 		};
 
 		gic: interrupt-controller@3400000 {
@@ -1102,4 +1145,121 @@ npu: npu@7122000 {
 			power-domains = <&ppu PD_NPU>;
 		};
 	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths1 1>;
+			sustainable-power = <1200>;
+
+			trips {
+				cpu0_threshold: cpu-trip-0 {
+					temperature = <70000>;
+					type = "passive";
+					hysteresis = <0>;
+				};
+
+				cpu0_target: cpu-trip-1 {
+					temperature = <90000>;
+					type = "passive";
+					hysteresis = <0>;
+				};
+
+				cpu0_critical: cpu-trip-2 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_target>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4_thermal: cpu4-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths1 0>;
+			sustainable-power = <1600>;
+
+			trips {
+				cpu4_threshold: cpu-trip-0 {
+					temperature = <70000>;
+					type = "passive";
+					hysteresis = <0>;
+				};
+
+				cpu4_target: cpu-trip-1 {
+					temperature = <90000>;
+					type = "passive";
+					hysteresis = <0>;
+				};
+
+				cpu4_critical: cpu-trip-2 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_target>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths1 2>;
+			sustainable-power = <2400>;
+
+			gpu-trips {
+				gpu_temp_threshold: gpu-trip-0 {
+					temperature = <60000>;
+					type = "passive";
+					hysteresis = <0>;
+				};
+
+				gpu_temp_target: gpu-trip-1 {
+					temperature = <90000>;
+					type = "passive";
+					hysteresis = <0>;
+				};
+
+				gpu_temp_critical: gpu-trip-2 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths0>;
+
+			trips {
+				ddr_temp_critical: ddr-trip-0 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+		};
+	};
 };
-- 
2.55.0