From: Pengyu Luo <mitltlatltl@gmail.com>
To: Neil Armstrong <neil.armstrong@linaro.org>,
Jessica Zhang <jesszhan0024@gmail.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Pengyu Luo <mitltlatltl@gmail.com>
Subject: [PATCH v2 2/2] drm/panel: Add Novatek NT36536 panel driver
Date: Sun, 5 Jul 2026 23:35:15 +0800 [thread overview]
Message-ID: <20260705153515.46147-3-mitltlatltl@gmail.com> (raw)
In-Reply-To: <20260705153515.46147-1-mitltlatltl@gmail.com>
Add a driver for panels using the Novatek NT36536 Display Driver IC,
including support for the CSOT PP8807HB1-1, a dual-link 10-bit panel
found in LENOVO Legion Y700 Gen4.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
---
v2:
- Collect tags
- Use devm_drm_panel_add() (Neil)
---
drivers/gpu/drm/panel/Kconfig | 11 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-novatek-nt36536.c | 488 ++++++++++++++++++
3 files changed, 500 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-novatek-nt36536.c
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index cfbfb371bc67..53c0b95c26ca 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -662,6 +662,17 @@ config DRM_PANEL_NOVATEK_NT36523
around the Novatek NT36523 display controller, such as some
Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
+config DRM_PANEL_NOVATEK_NT36536
+ tristate "Novatek NT36536 panel driver"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ select DRM_KMS_HELPER
+ help
+ Say Y here if you want to enable support for Novatek NT36536-based
+ display panels, such as the one found in the LENOVO Legion Y700
+ Gen4.
+
config DRM_PANEL_NOVATEK_NT36672A
tristate "Novatek NT36672A DSI panel"
depends on GPIOLIB
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 0f29f22f589e..3b523cf37833 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -64,6 +64,7 @@ obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35532) += panel-novatek-nt35532.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35560) += panel-novatek-nt35560.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35950) += panel-novatek-nt35950.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT36523) += panel-novatek-nt36523.o
+obj-$(CONFIG_DRM_PANEL_NOVATEK_NT36536) += panel-novatek-nt36536.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT36672A) += panel-novatek-nt36672a.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT36672E) += panel-novatek-nt36672e.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT37700F) += panel-novatek-nt37700f.o
diff --git a/drivers/gpu/drm/panel/panel-novatek-nt36536.c b/drivers/gpu/drm/panel/panel-novatek-nt36536.c
new file mode 100644
index 000000000000..961bfc605b1a
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-novatek-nt36536.c
@@ -0,0 +1,488 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Novatek NT36536 DriverIC panels driver
+ * Copyright (c) 2026 Pengyu Luo <mitltlatltl@gmail.com>
+ *
+ * Based on the sample code which is generated with
+ * linux-mdss-dsi-panel-driver-generator
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/display/drm_dsc.h>
+#include <drm/display/drm_dsc_helper.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_probe_helper.h>
+
+#include <video/mipi_display.h>
+
+struct novatek {
+ struct drm_panel panel;
+ struct mipi_dsi_device *dsi[2];
+ const struct panel_desc *desc;
+ struct drm_dsc_config dsc;
+ struct gpio_desc *reset_gpio;
+ struct regulator_bulk_data *supplies;
+ struct backlight_device *backlight;
+};
+
+struct panel_desc {
+ unsigned int width_mm;
+ unsigned int height_mm;
+ unsigned int bpc;
+ unsigned int lanes;
+ enum mipi_dsi_pixel_format format;
+ unsigned long mode_flags;
+ const struct drm_dsc_config *dsc_cfg;
+ const struct drm_display_mode *modes;
+ unsigned int num_modes;
+
+ int (*init_sequence)(struct mipi_dsi_multi_context *dsi_ctx);
+
+ bool is_dual_dsi;
+ bool has_dcs_backlight;
+};
+
+static const struct regulator_bulk_data novatek_supplies[] = {
+ { .supply = "vddio" },
+ { .supply = "vsp" },
+ { .supply = "vsn" },
+};
+
+static inline struct novatek *to_novatek(struct drm_panel *panel)
+{
+ return container_of(panel, struct novatek, panel);
+}
+
+static inline struct mipi_dsi_device *to_primary_dsi(struct novatek *ctx)
+{
+ /* Sync on DSI1 for dual dsi */
+ return ctx->desc->is_dual_dsi ? ctx->dsi[1] : ctx->dsi[0];
+}
+
+static void novatek_reset(struct novatek *ctx)
+{
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ usleep_range(11000, 12000);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ usleep_range(1000, 2000);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ usleep_range(3000, 4000);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ usleep_range(10000, 11000);
+}
+
+static int novatek_prepare(struct drm_panel *panel)
+{
+ struct novatek *ctx = to_novatek(panel);
+ struct mipi_dsi_device *dsi = to_primary_dsi(ctx);
+ struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
+ struct drm_dsc_picture_parameter_set pps;
+ struct device *dev = &dsi->dev;
+ int ret;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(novatek_supplies),
+ ctx->supplies);
+ if (ret < 0)
+ return ret;
+
+ novatek_reset(ctx);
+
+ ret = ctx->desc->init_sequence(&dsi_ctx);
+ if (ret < 0) {
+ dev_err(dev, "Failed to initialize panel: %d\n", ret);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ regulator_bulk_disable(ARRAY_SIZE(novatek_supplies),
+ ctx->supplies);
+ return ret;
+ }
+
+ drm_dsc_pps_payload_pack(&pps, &ctx->dsc);
+ mipi_dsi_picture_parameter_set_multi(&dsi_ctx, &pps);
+ mipi_dsi_compression_mode_multi(&dsi_ctx, true);
+ mipi_dsi_msleep(&dsi_ctx, 28);
+
+ return backlight_enable(ctx->backlight);
+}
+
+static int novatek_off(struct mipi_dsi_multi_context *dsi_ctx)
+{
+ mipi_dsi_dcs_set_display_off_multi(dsi_ctx);
+ mipi_dsi_dcs_enter_sleep_mode_multi(dsi_ctx);
+
+ return dsi_ctx->accum_err;
+}
+
+static int novatek_unprepare(struct drm_panel *panel)
+{
+ struct novatek *ctx = to_novatek(panel);
+ struct mipi_dsi_device *dsi = to_primary_dsi(ctx);
+ struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
+ struct device *dev = &dsi->dev;
+ int ret;
+
+ backlight_disable(ctx->backlight);
+
+ ret = novatek_off(&dsi_ctx);
+ if (ret < 0)
+ dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
+
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ regulator_bulk_disable(ARRAY_SIZE(novatek_supplies), ctx->supplies);
+
+ return 0;
+}
+
+static int novatek_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct novatek *ctx = to_novatek(panel);
+ const struct panel_desc *desc = ctx->desc;
+ int i;
+
+ for (i = 0; i < desc->num_modes; i++) {
+ const struct drm_display_mode *m = &desc->modes[i];
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(connector->dev, m);
+ if (!mode) {
+ dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
+ m->hdisplay, m->vdisplay, drm_mode_vrefresh(m));
+ return -ENOMEM;
+ }
+
+ mode->type = DRM_MODE_TYPE_DRIVER;
+ if (i == 0)
+ mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+ drm_mode_set_name(mode);
+ drm_mode_probed_add(connector, mode);
+ }
+
+ connector->display_info.width_mm = desc->width_mm;
+ connector->display_info.height_mm = desc->height_mm;
+ connector->display_info.bpc = desc->bpc;
+
+ return desc->num_modes;
+}
+
+static const struct drm_panel_funcs novatek_panel_funcs = {
+ .prepare = novatek_prepare,
+ .unprepare = novatek_unprepare,
+ .get_modes = novatek_get_modes,
+};
+
+static int novatek_bl_update_status(struct backlight_device *bl)
+{
+ struct novatek *ctx = bl_get_data(bl);
+ u16 brightness = backlight_get_brightness(bl);
+
+ return mipi_dsi_dcs_set_display_brightness_large(to_primary_dsi(ctx),
+ brightness);
+}
+
+static const struct backlight_ops novatek_bl_ops = {
+ .update_status = novatek_bl_update_status,
+};
+
+static struct backlight_device *novatek_create_backlight(struct novatek *ctx)
+{
+ struct mipi_dsi_device *dsi = to_primary_dsi(ctx);
+ struct device *dev = &dsi->dev;
+ const struct backlight_properties props = {
+ .type = BACKLIGHT_RAW,
+ .brightness = 512,
+ .max_brightness = 4095,
+ .scale = BACKLIGHT_SCALE_NON_LINEAR,
+ };
+
+ return devm_backlight_device_register(dev, dev_name(dev), dev, ctx,
+ &novatek_bl_ops, &props);
+}
+
+static int csot_pp8807hb1_1_init_seq(struct mipi_dsi_multi_context *dsi_ctx)
+{
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xff, 0x20);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xfb, 0x01);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, MIPI_DCS_SET_PARTIAL_ROWS, 0x50);
+
+ /* cabc */
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xff, 0x23);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xfb, 0x01);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x89, 0xa4);
+
+ /* pen code */
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xff, 0x26);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xfb, 0x01);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xcd, 0x8f, 0xa9, 0x00);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xce, 0x8c, 0xa9, 0x00);
+
+ /* esd init */
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xff, 0x27);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xfb, 0x01);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x79, 0x22);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xd0, 0x31);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xd1, 0x08, 0x08);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xd2, 0x08);
+
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xff, 0xd0);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xfb, 0x01);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x00, 0x31);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x09, 0xee);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x1c, 0x77);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x1d, 0x07);
+
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xff, 0xe0);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xfb, 0x01);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xbb, 0x00);
+
+ /* IC transfer */
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xff, 0xf0);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xfb, 0x01);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xe6, 0x02);
+
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xff, 0x10);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xfb, 0x01);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x3b,
+ 0x03, 0x4e, 0x1a, 0x04, 0x04, 0x01, 0x80,
+ 0x36, 0x36);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x60, 0x00);
+ /* enable DSC */
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x90, 0x03, 0x00);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x91,
+ 0xab, 0xa8, 0x00, 0x14, 0xd2, 0x00, 0x00,
+ 0x00, 0x01, 0xb9, 0x00, 0x06, 0x05, 0x7a,
+ 0x05, 0xb8);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x92, 0x10, 0xe0);
+ /* frame ctl */
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xb2, 0x91, 0x80);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xb3, 0x40);
+ mipi_dsi_dcs_exit_sleep_mode_multi(dsi_ctx);
+ mipi_dsi_msleep(dsi_ctx, 105);
+ mipi_dsi_dcs_set_display_on_multi(dsi_ctx);
+ mipi_dsi_msleep(dsi_ctx, 40);
+
+ return dsi_ctx->accum_err;
+}
+
+static struct drm_dsc_config csot_pp8807hb1_1_dsc_cfg = {
+ .dsc_version_major = 1,
+ .dsc_version_minor = 2,
+ .slice_height = 20,
+ .slice_width = 476,
+ .slice_count = 2,
+ .bits_per_component = 10,
+ .bits_per_pixel = 8 << 4,
+ .block_pred_enable = true,
+};
+
+static const struct drm_display_mode csot_pp8807hb1_1_modes[] = {
+ /* 915552 KHz */
+ {
+ .clock = (952 + 138 + 16 + 16) * 2 * (3040 + 26 + 4 + 330) * 120 / 1000,
+ .hdisplay = 952 * 2,
+ .hsync_start = (952 + 138) * 2,
+ .hsync_end = (952 + 138 + 16) * 2,
+ .htotal = (952 + 138 + 16 + 16) * 2,
+ .vdisplay = 3040,
+ .vsync_start = 3040 + 26,
+ .vsync_end = 3040 + 26 + 4,
+ .vtotal = 3040 + 26 + 4 + 330,
+ },
+ {
+ .clock = (952 + 138 + 16 + 16) * 2 * (3040 + 3426 + 4 + 330) * 60 / 1000,
+ .hdisplay = 952 * 2,
+ .hsync_start = (952 + 138) * 2,
+ .hsync_end = (952 + 138 + 16) * 2,
+ .htotal = (952 + 138 + 16 + 16) * 2,
+ .vdisplay = 3040,
+ .vsync_start = 3040 + 3426,
+ .vsync_end = 3040 + 3426 + 4,
+ .vtotal = 3040 + 3426 + 4 + 330,
+ },
+ {
+ .clock = (952 + 138 + 16 + 16) * 2 * (3040 + 10226 + 4 + 330) * 30 / 1000,
+ .hdisplay = 952 * 2,
+ .hsync_start = (952 + 138) * 2,
+ .hsync_end = (952 + 138 + 16) * 2,
+ .htotal = (952 + 138 + 16 + 16) * 2,
+ .vdisplay = 3040,
+ .vsync_start = 3040 + 10226,
+ .vsync_end = 3040 + 10226 + 4,
+ .vtotal = 3040 + 10226 + 4 + 330,
+ },
+ /* 1064606.4 KHz */
+ {
+ .clock = (952 + 50 + 16 + 16) * 2 * (3040 + 26 + 4 + 50) * 165 / 1000,
+ .hdisplay = 952 * 2,
+ .hsync_start = (952 + 50) * 2,
+ .hsync_end = (952 + 50 + 16) * 2,
+ .htotal = (952 + 50 + 16 + 16) * 2,
+ .vdisplay = 3040,
+ .vsync_start = 3040 + 26,
+ .vsync_end = 3040 + 26 + 4,
+ .vtotal = 3040 + 26 + 4 + 50,
+ },
+ {
+ .clock = (952 + 50 + 16 + 16) * 2 * (3040 + 481 + 4 + 50) * 144 / 1000,
+ .hdisplay = 952 * 2,
+ .hsync_start = (952 + 50) * 2,
+ .hsync_end = (952 + 50 + 16) * 2,
+ .htotal = (952 + 50 + 16 + 16) * 2,
+ .vdisplay = 3040,
+ .vsync_start = 3040 + 481,
+ .vsync_end = 3040 + 481 + 4,
+ .vtotal = 3040 + 481 + 4 + 50,
+ },
+ /* 737942.4 KHz */
+ {
+ .clock = (952 + 330 + 16 + 16) * 2 * (3040 + 26 + 4 + 50) * 90 / 1000,
+ .hdisplay = 952 * 2,
+ .hsync_start = (952 + 330) * 2,
+ .hsync_end = (952 + 330 + 16) * 2,
+ .htotal = (952 + 330 + 16 + 16) * 2,
+ .vdisplay = 3040,
+ .vsync_start = 3040 + 26,
+ .vsync_end = 3040 + 26 + 4,
+ .vtotal = 3040 + 26 + 4 + 50,
+ },
+};
+
+static int novatek_probe(struct mipi_dsi_device *dsi)
+{
+ struct mipi_dsi_device_info dsi_info = {"dsi-secondary", 0, NULL};
+ struct mipi_dsi_host *dsi1_host;
+ struct device *dev = &dsi->dev;
+ const struct panel_desc *desc;
+ struct device_node *dsi1;
+ struct novatek *ctx;
+ int num_dsi = 1;
+ int ret, i;
+
+ ctx = devm_drm_panel_alloc(dev, struct novatek, panel,
+ &novatek_panel_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ ret = devm_regulator_bulk_get_const(dev, ARRAY_SIZE(novatek_supplies),
+ novatek_supplies, &ctx->supplies);
+ if (ret < 0)
+ return ret;
+
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(ctx->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+ "Failed to get reset-gpios\n");
+
+ desc = of_device_get_match_data(dev);
+ if (!desc)
+ return -ENODEV;
+ ctx->desc = desc;
+ ctx->dsc = *desc->dsc_cfg;
+
+ if (desc->is_dual_dsi) {
+ num_dsi = 2;
+ dsi1 = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
+ if (!dsi1) {
+ dev_err(dev, "cannot get secondary DSI node.\n");
+ return -ENODEV;
+ }
+
+ dsi1_host = of_find_mipi_dsi_host_by_node(dsi1);
+ of_node_put(dsi1);
+ if (!dsi1_host)
+ return dev_err_probe(dev, -EPROBE_DEFER,
+ "cannot get secondary DSI host\n");
+
+ ctx->dsi[1] = devm_mipi_dsi_device_register_full(dev, dsi1_host,
+ &dsi_info);
+ if (IS_ERR(ctx->dsi[1])) {
+ dev_err(dev, "cannot get secondary DSI device\n");
+ return PTR_ERR(ctx->dsi[1]);
+ }
+
+ mipi_dsi_set_drvdata(ctx->dsi[1], ctx);
+ }
+
+ ctx->dsi[0] = dsi;
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ ctx->panel.prepare_prev_first = true;
+
+ ret = devm_drm_panel_add(dev, &ctx->panel);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "failed to add panel\n");
+
+ for (i = 0; i < num_dsi; i++) {
+ ctx->dsi[i]->lanes = desc->lanes;
+ ctx->dsi[i]->format = desc->format;
+ ctx->dsi[i]->mode_flags = desc->mode_flags;
+ ctx->dsi[i]->dsc = &ctx->dsc;
+ ret = devm_mipi_dsi_attach(dev, ctx->dsi[i]);
+ if (ret < 0) {
+ drm_panel_remove(&ctx->panel);
+ return dev_err_probe(dev, ret,
+ "Failed to attach to DSI host\n");
+ }
+ }
+
+ if (desc->has_dcs_backlight) {
+ ctx->backlight = novatek_create_backlight(ctx);
+ if (IS_ERR(ctx->backlight))
+ return dev_err_probe(dev, PTR_ERR(ctx->backlight),
+ "Failed to create backlight\n");
+ } else {
+ ret = drm_panel_of_backlight(&ctx->panel);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to get backlight\n");
+ }
+
+ return 0;
+}
+
+/* Model name: CSOT PP8807HB1-1 */
+static const struct panel_desc csot_pp8807hb1_1_desc = {
+ .width_mm = 118,
+ .height_mm = 190,
+ .bpc = 10, /* set this to 8 with RGB888 format to support 8-bit mode */
+ .lanes = 3,
+ .format = MIPI_DSI_FMT_RGB101010,
+ .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_CLOCK_NON_CONTINUOUS |
+ MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_DSC_ALL_SLICES_IN_PKT,
+ .dsc_cfg = &csot_pp8807hb1_1_dsc_cfg,
+ .modes = csot_pp8807hb1_1_modes,
+ .num_modes = ARRAY_SIZE(csot_pp8807hb1_1_modes),
+ .init_sequence = csot_pp8807hb1_1_init_seq,
+ .is_dual_dsi = true,
+ .has_dcs_backlight = false,
+};
+
+static const struct of_device_id novatek_of_match[] = {
+ { .compatible = "csot,pp8807hb1-1", .data = &csot_pp8807hb1_1_desc },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, novatek_of_match);
+
+static struct mipi_dsi_driver novatek_driver = {
+ .probe = novatek_probe,
+ .driver = {
+ .name = "panel-novatek-nt36536",
+ .of_match_table = novatek_of_match,
+ },
+};
+module_mipi_dsi_driver(novatek_driver);
+
+MODULE_AUTHOR("Pengyu Luo <mitltlatltl@gmail.com>");
+MODULE_DESCRIPTION("Novatek NT36536 DriverIC panels driver");
+MODULE_LICENSE("GPL");
--
2.54.0
next prev parent reply other threads:[~2026-07-05 15:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-05 15:35 [PATCH v2 0/2] drm/panel: Add Novatek NT36536 panel driver Pengyu Luo
2026-07-05 15:35 ` [PATCH v2 1/2] dt-bindings: display: panel: Add Novatek NT36536 Pengyu Luo
2026-07-05 15:44 ` sashiko-bot
2026-07-05 15:35 ` Pengyu Luo [this message]
2026-07-05 15:47 ` [PATCH v2 2/2] drm/panel: Add Novatek NT36536 panel driver sashiko-bot
2026-07-06 17:15 ` Uwe Kleine-König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260705153515.46147-3-mitltlatltl@gmail.com \
--to=mitltlatltl@gmail.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jesszhan0024@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.