[PATCH v4 1/3] dt-bindings: watchdog: npcm: add GCR syscon property

[Tomer Maimon <tmaimon77@gmail.com>]

NPCM750 and NPCM845 latch watchdog reset indications in the SoC
GCR block rather than in the watchdog block itself.

Add the optional nuvoton,sysgcr phandle so watchdog nodes can
reference the shared GCR reset-status registers that hold those
latched watchdog reset indications.

This is needed by the following reset-status support, which reads
those latches and reports watchdog-caused resets through bootstatus.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
---
 .../bindings/watchdog/nuvoton,npcm750-wdt.yaml     | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/watchdog/nuvoton,npcm750-wdt.yaml b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm750-wdt.yaml
index 7aa30f5b5c49..81269fdc81a5 100644
--- a/Documentation/devicetree/bindings/watchdog/nuvoton,npcm750-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm750-wdt.yaml
@@ -16,6 +16,14 @@ description:
 
 allOf:
   - $ref: watchdog.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nuvoton,wpcm450-wdt
+    then:
+      properties:
+        nuvoton,sysgcr: false
 
 properties:
   compatible:
@@ -40,6 +48,12 @@ properties:
   clock-frequency:
     description: Frequency in Hz of the clock that drives the NPCM timer.
 
+  nuvoton,sysgcr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      a phandle to access the GCR reset-status registers that latch
+      watchdog reset indications on NPCM750 and NPCM845.
+
 required:
   - compatible
   - reg
-- 
2.34.1