All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mingming Cao <mmc@linux.ibm.com>
To: netdev@vger.kernel.org
Cc: horms@kernel.org, bjking1@linux.ibm.com, haren@linux.ibm.com,
	ricklind@linux.ibm.com, mmc@linux.ibm.com, kuba@kernel.org,
	edumazet@google.com, pabeni@redhat.com,
	linuxppc-dev@lists.ozlabs.org, maddy@linux.ibm.com,
	mpe@ellerman.id.au, Dave Marquardt <davemarq@linux.ibm.com>
Subject: [PATCH net-next v3 09/15] ibmveth: Add queue-aware RX buffer submit helper for MQ
Date: Mon,  6 Jul 2026 12:35:57 -0700	[thread overview]
Message-ID: <20260706193603.8039-10-mmc@linux.ibm.com> (raw)
In-Reply-To: <20260706193603.8039-1-mmc@linux.ibm.com>

Replenish is the last open-path hypervisor call that still needs
per-queue awareness before MQ receive is enabled. Today
ibmveth_replenish_buffer_pool() calls h_add_logical_lan_buffer() or
h_add_logical_lan_buffers() directly; MQ posts via
H_ADD_LOGICAL_LAN_BUFFERS_QUEUE against adapter->queue_handle[].

Add ibmveth_add_logical_lan_buffers() to pick the hcall:
multi_queue uses h_add_logical_lan_buffers_queue() (up to 12 buffers,
IOBAs packed with odd counts in the upper 32 bits); legacy uses the
existing single- and multi-buffer hcalls. Count add_buf/add_bufs/
add_bufs_queue in hcall_stats.

Thread queue_index through replenish_task() and replenish_buffer_pool()
so they index rx_buff_pool[queue_index][pool]. All callers still pass
queue 0; legacy hcalls remain the live path until MQ probe enables
multi_queue.

Also split H_FUNCTION handling: legacy batch falls back to single-buffer
mode; multi_queue logs an error on unsupported firmware.

Signed-off-by: Mingming Cao <mmc@linux.ibm.com>
Reviewed-by: Dave Marquardt <davemarq@linux.ibm.com>
---
 drivers/net/ethernet/ibm/ibmveth.c | 134 ++++++++++++++++++++---------
 1 file changed, 94 insertions(+), 40 deletions(-)

diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c
index fa2d4777ffc7..b3b3886c3eed 100644
--- a/drivers/net/ethernet/ibm/ibmveth.c
+++ b/drivers/net/ethernet/ibm/ibmveth.c
@@ -597,11 +597,73 @@ static inline void ibmveth_flush_buffer(void *addr, unsigned long length)
 		asm("dcbf %0,%1,1" :: "b" (addr), "r" (offset));
 }
 
+/**
+ * ibmveth_add_logical_lan_buffers - Add receive buffers to hypervisor
+ * @adapter: ibmveth adapter structure
+ * @descs: array of buffer descriptors to add
+ * @filled: number of valid descriptors in the array
+ * @buff_size: size of each buffer (multi-queue mode only)
+ * @queue_index: RX queue index
+ *
+ * Return: hypervisor return code
+ */
+static long ibmveth_add_logical_lan_buffers(struct ibmveth_adapter *adapter,
+					    union ibmveth_buf_desc *descs,
+					    int filled,
+					    unsigned long buff_size,
+					    int queue_index)
+{
+	struct vio_dev *vdev = adapter->vdev;
+	unsigned long rc;
+
+	if (adapter->multi_queue) {
+		unsigned long buffersznum = (buff_size << 32) | filled;
+		unsigned long ioba[IBMVETH_MAX_RX_PER_HCALL / 2] = {0};
+		int i;
+
+		/* Pack descriptor addresses into ioba pairs.
+		 * Each ioba holds two 32-bit addresses packed into 64 bits:
+		 * - Even descriptors (0,2,4...) go in high 32 bits
+		 * - Odd descriptors (1,3,5...) go in low 32 bits
+		 */
+		for (i = 0; i < filled && i < IBMVETH_MAX_RX_PER_HCALL; i++) {
+			int pair_idx = i / 2;           /* Which pair: 0-5 */
+			int is_high = (i % 2 == 0);     /* High or low 32 bits */
+
+			if (is_high)
+				ioba[pair_idx] = (unsigned long)descs[i].fields.address << 32;
+			else
+				ioba[pair_idx] |= descs[i].fields.address;
+		}
+
+		rc = h_add_logical_lan_buffers_queue(vdev->unit_address,
+						     adapter->queue_handle[queue_index],
+						     buffersznum,
+						     ioba[0], ioba[1], ioba[2],
+						     ioba[3], ioba[4], ioba[5]);
+		adapter->hcall_stats.add_bufs_queue++;
+	} else if (filled == 1) {
+		rc = h_add_logical_lan_buffer(vdev->unit_address,
+					      descs[0].desc);
+		adapter->hcall_stats.add_buf++;
+	} else {
+		rc = h_add_logical_lan_buffers(vdev->unit_address,
+					       descs[0].desc, descs[1].desc,
+					       descs[2].desc, descs[3].desc,
+					       descs[4].desc, descs[5].desc,
+					       descs[6].desc, descs[7].desc);
+		adapter->hcall_stats.add_bufs++;
+	}
+
+	return rc;
+}
+
 /* replenish the buffers for a pool.  note that we don't need to
  * skb_reserve these since they are used for incoming...
  */
 static void ibmveth_replenish_buffer_pool(struct ibmveth_adapter *adapter,
-					  struct ibmveth_buff_pool *pool)
+					  struct ibmveth_buff_pool *pool,
+					  int queue_index)
 {
 	union ibmveth_buf_desc descs[IBMVETH_MAX_RX_PER_HCALL] = {0};
 	u32 remaining = pool->size - atomic_read(&pool->available);
@@ -687,24 +749,15 @@ static void ibmveth_replenish_buffer_pool(struct ibmveth_adapter *adapter,
 		if (!filled)
 			break;
 
-		/* single buffer case*/
-		if (filled == 1)
-			lpar_rc = h_add_logical_lan_buffer(vdev->unit_address,
-							   descs[0].desc);
-		else
-			/* Multi-buffer hcall */
-			lpar_rc = h_add_logical_lan_buffers(vdev->unit_address,
-							    descs[0].desc,
-							    descs[1].desc,
-							    descs[2].desc,
-							    descs[3].desc,
-							    descs[4].desc,
-							    descs[5].desc,
-							    descs[6].desc,
-							    descs[7].desc);
+		lpar_rc = ibmveth_add_logical_lan_buffers(adapter, descs,
+							  filled,
+							  pool->buff_size,
+							  queue_index);
+
 		if (lpar_rc != H_SUCCESS) {
 			dev_warn_ratelimited(dev,
-					     "RX h_add_logical_lan failed: filled=%u, rc=%lu, batch=%u\n",
+					     "RX h_add_logical_lan %s failed: filled=%u, rc=%lu, batch=%u\n",
+					     adapter->multi_queue ? "_queue" : "",
 					     filled, lpar_rc, batch);
 			goto hcall_failure;
 		}
@@ -745,24 +798,19 @@ static void ibmveth_replenish_buffer_pool(struct ibmveth_adapter *adapter,
 		}
 		adapter->replenish_add_buff_failure += filled;
 
-		/*
-		 * If multi rx buffers hcall is no longer supported by FW
-		 * e.g. in the case of Live Partition Migration
-		 */
-		if (batch > 1 && lpar_rc == H_FUNCTION) {
-			/*
-			 * Instead of retry submit single buffer individually
-			 * here just set the max rx buffer per hcall to 1
-			 * buffers will be respleshed next time
-			 * when ibmveth_replenish_buffer_pool() is called again
-			 * with single-buffer case
-			 */
-			netdev_info(adapter->netdev,
-				    "RX Multi buffers not supported by FW, rc=%lu\n",
-				    lpar_rc);
-			adapter->rx_buffers_per_hcall = 1;
-			netdev_info(adapter->netdev,
-				    "Next rx replesh will fall back to single-buffer hcall\n");
+		if (lpar_rc == H_FUNCTION) {
+			if (adapter->multi_queue) {
+				netdev_err(adapter->netdev,
+					   "Unexpected H_FUNCTION from multi-queue buffer add (queue=%d, batch=%d)\n",
+					   queue_index, batch);
+				break;
+			} else if (batch > 1) {
+				netdev_warn(adapter->netdev,
+					    "H_FUNCTION from legacy batch buffer add (batch=%d), falling back to single buffer mode\n",
+					    batch);
+				adapter->rx_buffers_per_hcall = 1;
+				continue;
+			}
 		}
 		break;
 	}
@@ -784,18 +832,24 @@ static void ibmveth_update_rx_no_buffer(struct ibmveth_adapter *adapter)
 }
 
 /* replenish routine */
-static void ibmveth_replenish_task(struct ibmveth_adapter *adapter)
+static void ibmveth_replenish_task(struct ibmveth_adapter *adapter,
+				   int queue_index)
 {
 	int i;
 
+	if (queue_index >= adapter->num_rx_queues)
+		return;
+
 	adapter->replenish_task_cycles++;
 
 	for (i = (IBMVETH_NUM_BUFF_POOLS - 1); i >= 0; i--) {
-		struct ibmveth_buff_pool *pool = &adapter->rx_buff_pool[0][i];
+		struct ibmveth_buff_pool *pool =
+			&adapter->rx_buff_pool[queue_index][i];
 
 		if (pool->active &&
 		    (atomic_read(&pool->available) < pool->threshold))
-			ibmveth_replenish_buffer_pool(adapter, pool);
+			ibmveth_replenish_buffer_pool(adapter, pool,
+						      queue_index);
 	}
 
 	ibmveth_update_rx_no_buffer(adapter);
@@ -2307,7 +2361,7 @@ static int ibmveth_poll(struct napi_struct *napi, int budget)
 		}
 	}
 
-	ibmveth_replenish_task(adapter);
+	ibmveth_replenish_task(adapter, 0);
 
 	if (frames_processed == budget)
 		goto out;
@@ -2458,7 +2512,7 @@ static void ibmveth_poll_controller(struct net_device *dev)
 {
 	struct ibmveth_adapter *adapter = netdev_priv(dev);
 
-	ibmveth_replenish_task(adapter);
+	ibmveth_replenish_task(adapter, 0);
 	ibmveth_interrupt(dev->irq, &adapter->napi[0]);
 }
 #endif
-- 
2.39.3 (Apple Git-146)


  parent reply	other threads:[~2026-07-06 19:37 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-06 19:35 [PATCH net-next v3 00/15] ibmveth: Add multi-queue RX support Mingming Cao
2026-07-06 19:35 ` [PATCH net-next v3 01/15] ibmveth: Add MQ RX hypercall wrappers and call definitions Mingming Cao
2026-07-06 19:35 ` [PATCH net-next v3 02/15] ibmveth: Prepare MQ RX adapter and statistics structures Mingming Cao
2026-07-06 19:35 ` [PATCH net-next v3 03/15] ibmveth: Refactor RX resource allocation for MQ RX bring-up Mingming Cao
2026-07-06 19:35 ` [PATCH net-next v3 04/15] ibmveth: Refactor buffer pool management for per-queue MQ RX Mingming Cao
2026-07-06 19:35 ` [PATCH net-next v3 05/15] ibmveth: Refactor RX interrupt control for MQ RX queues Mingming Cao
2026-07-06 19:35 ` [PATCH net-next v3 06/15] ibmveth: Refactor TX resource allocation in open/close paths Mingming Cao
2026-07-06 19:35 ` [PATCH net-next v3 07/15] ibmveth: Add RX queue register/deregister helpers for MQ Mingming Cao
2026-07-06 19:35 ` [PATCH net-next v3 08/15] ibmveth: Refactor open/close into MQ-ready resource pipeline Mingming Cao
2026-07-06 19:35 ` Mingming Cao [this message]
2026-07-06 19:35 ` [PATCH net-next v3 10/15] ibmveth: Enable multi-queue RX receive path Mingming Cao
2026-07-06 19:35 ` [PATCH net-next v3 11/15] ibmveth: Add per-queue RX and TX statistics collection and reporting Mingming Cao
2026-07-06 19:36 ` [PATCH net-next v3 12/15] ibmveth: Expose per-queue buffer pool details via sysfs Mingming Cao
2026-07-06 19:36 ` [PATCH net-next v3 13/15] ibmveth: Implement incremental MQ RX queue resize Mingming Cao
2026-07-06 19:36 ` [PATCH net-next v3 14/15] ibmveth: Wire ethtool set_channels to " Mingming Cao
2026-07-06 19:36 ` [PATCH net-next v3 15/15] ibmveth: Fix MQ RX poll and shutdown hangs after " Mingming Cao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260706193603.8039-10-mmc@linux.ibm.com \
    --to=mmc@linux.ibm.com \
    --cc=bjking1@linux.ibm.com \
    --cc=davemarq@linux.ibm.com \
    --cc=edumazet@google.com \
    --cc=haren@linux.ibm.com \
    --cc=horms@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=maddy@linux.ibm.com \
    --cc=mpe@ellerman.id.au \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=ricklind@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.