From: "Pali Rohár" <pali@kernel.org>
To: Steve French <sfrench@samba.org>,
Paulo Alcantara <pc@manguebit.org>,
Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: linux-cifs@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH RESEND 10/11] cifs: Add support for parsing WSL symlinks in version 1 format
Date: Mon, 6 Jul 2026 22:50:06 +0200 [thread overview]
Message-ID: <20260706205006.a4oczzxh4ythlty3@pali> (raw)
In-Reply-To: <20260706184819.22124-11-pali@kernel.org>
On Monday 06 July 2026 20:48:18 Pali Rohár wrote:
> - /* MS-FSCC 2.1.2.7 defines layout of the Target field only for Version 2. */
> u32 version = le32_to_cpu(buf->Version);
> + switch (version) {
> + case 1:
> + /*
> + * Layout version 1 stores the symlink target in the data section of
> + * the file encoded in UTF-8 without trailing null-term byte.
> + */
>
> - if (version != 2) {
> + oparms = CIFS_OPARMS(cifs_sb, tcon, full_path, FILE_READ_DATA,
> + FILE_OPEN, CREATE_NOT_DIR | OPEN_REPARSE_POINT,
> + ACL_NO_MODE);
> + oparms.fid = &fid;
> + oplock = tcon->ses->server->oplocks ? REQ_OPLOCK : 0;
> + rc = tcon->ses->server->ops->open(xid, &oparms, &oplock, NULL);
> + if (rc)
> + goto out;
> +
> + free_symname_utf8 = true;
> + symname_utf8_len = le64_to_cpu(data->fi.EndOfFile);
> + symname_utf8 = kmalloc(symname_utf8_len, GFP_KERNEL);
> + if (!symname_utf8) {
> + rc = -ENOMEM;
> + goto out;
> + }
Sashiko AI wrote:
https://sashiko.dev/#/patchset/20260706184819.22124-1-pali%40kernel.org
Does this leak the server-side file handle and oplock?
If this kmalloc() fails, the code jumps to the out label without calling
tcon->ses->server->ops->close(xid, tcon, &fid).
This is really a problem. I would suggest to move the kmalloc() block
above the tcon->ses->server->ops->open(...) block which should address
this issue. E.g.:
diff --git a/fs/smb/client/reparse.c b/fs/smb/client/reparse.c
index 3418e4b66022..3fe57d166776 100644
--- a/fs/smb/client/reparse.c
+++ b/fs/smb/client/reparse.c
@@ -1133,6 +1133,14 @@ static int parse_reparse_wsl_symlink(struct reparse_wsl_symlink_data_buffer *buf
* the file encoded in UTF-8 without trailing null-term byte.
*/
+ free_symname_utf8 = true;
+ symname_utf8_len = le64_to_cpu(data->fi.EndOfFile);
+ symname_utf8 = kmalloc(symname_utf8_len, GFP_KERNEL);
+ if (!symname_utf8) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
oparms = CIFS_OPARMS(cifs_sb, tcon, full_path, FILE_READ_DATA,
FILE_OPEN, CREATE_NOT_DIR | OPEN_REPARSE_POINT,
ACL_NO_MODE);
@@ -1142,14 +1150,6 @@ static int parse_reparse_wsl_symlink(struct reparse_wsl_symlink_data_buffer *buf
if (rc)
goto out;
- free_symname_utf8 = true;
- symname_utf8_len = le64_to_cpu(data->fi.EndOfFile);
- symname_utf8 = kmalloc(symname_utf8_len, GFP_KERNEL);
- if (!symname_utf8) {
- rc = -ENOMEM;
- goto out;
- }
-
buf_type = CIFS_NO_BUFFER;
io_parms = (struct cifs_io_parms) {
.netfid = fid.netfid,
next prev parent reply other threads:[~2026-07-06 20:50 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-06 18:48 [PATCH RESEND 00/11] cifs: Various changes Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 01/11] cifs: Fix and improve cifs_is_path_accessible() function Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 02/11] cifs: Remove code for querying FILE_INFO_STANDARD via CIFSSMBQPathInfo() Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 03/11] cifs: Remove CIFSSMBSetPathInfoFB() fallback function Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 04/11] cifs: Remove cifs_backup_query_path_info() and replace it by cifs_query_path_info() Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 05/11] cifs: Fix validation of EAs for WSL reparse points Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 06/11] cifs: Validate presence of EA $LXMOD " Pali Rohár
2026-07-06 22:30 ` Steve French
2026-07-06 22:39 ` Pali Rohár
2026-07-06 22:55 ` Steve French
2026-07-06 23:02 ` Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 07/11] cifs: Check if server supports EAs before trying to set it for WSL Pali Rohár
2026-07-06 22:33 ` Steve French
2026-07-06 22:42 ` Pali Rohár
[not found] ` <CAH2r5mvDGM7i8EsdPkW681a_AnXOAsHkg38eJqegO7g2gV8qAw@mail.gmail.com>
2026-07-06 22:58 ` Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 08/11] cifs: Extend ->set_EA() callback to allow operate on reparse point Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 09/11] cifs: Create native Window socket file compatible also with WSL subsystem Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 10/11] cifs: Add support for parsing WSL symlinks in version 1 format Pali Rohár
2026-07-06 20:50 ` Pali Rohár [this message]
2026-07-06 21:02 ` Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 11/11] cifs: Add support for creating " Pali Rohár
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260706205006.a4oczzxh4ythlty3@pali \
--to=pali@kernel.org \
--cc=linux-cifs@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pc@manguebit.org \
--cc=ronniesahlberg@gmail.com \
--cc=sfrench@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.