From: Eric Biggers <ebiggers@kernel.org>
To: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Eric Biggers <ebiggers@kernel.org>
Subject: [PATCH 08/33] crypto: aes - Add ECB support using library
Date: Mon, 6 Jul 2026 22:34:38 -0700 [thread overview]
Message-ID: <20260707053503.209874-9-ebiggers@kernel.org> (raw)
In-Reply-To: <20260707053503.209874-1-ebiggers@kernel.org>
Implement the "ecb(aes)" crypto_skcipher algorithm using the
corresponding library functions.
Among other benefits, this allows the architecture-optimized AES-ECB
code to be migrated into the library while still leaving it accessible
via crypto_skcipher, eliminating lots of boilerplate code.
For now the cra_priority is set to just 110, since the
architecture-optimized implementations of this algorithm haven't yet
been migrated into the library. It will be boosted once that happens.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
---
crypto/Kconfig | 5 ++
crypto/aes.c | 165 ++++++++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 169 insertions(+), 1 deletion(-)
diff --git a/crypto/Kconfig b/crypto/Kconfig
index f1e372195273..093508d13b8c 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -359,7 +359,12 @@ config CRYPTO_AES
select CRYPTO_ALGAPI
select CRYPTO_LIB_AES
select CRYPTO_LIB_AES_CBC_MACS if CRYPTO_CMAC || CRYPTO_XCBC || CRYPTO_CCM
+ select CRYPTO_LIB_AES_ECB if CRYPTO_ECB
select CRYPTO_HASH if CRYPTO_CMAC || CRYPTO_XCBC || CRYPTO_CCM
+ # CRYPTO_SKCIPHER should be selected only if a mode that needs it is
+ # enabled, but that doesn't work due to a recursive dependency caused by
+ # CRYPTO_SKCIPHER selecting CRYPTO_ECB. So just always select it.
+ select CRYPTO_SKCIPHER
help
AES cipher algorithms (Rijndael)(FIPS-197, ISO/IEC 18033-3)
diff --git a/crypto/aes.c b/crypto/aes.c
index 6bf23eb0503f..162715a82be3 100644
--- a/crypto/aes.c
+++ b/crypto/aes.c
@@ -6,12 +6,16 @@
*/
#include <crypto/aes-cbc-macs.h>
+#include <crypto/aes-ecb.h>
#include <crypto/aes.h>
#include <crypto/algapi.h>
#include <crypto/internal/hash.h>
+#include <crypto/internal/skcipher.h>
+#include <crypto/scatterwalk.h>
#include <linux/module.h>
static_assert(__alignof__(struct aes_key) <= CRYPTO_MINALIGN);
+static_assert(__alignof__(struct aes_enckey) <= CRYPTO_MINALIGN);
static int crypto_aes_setkey(struct crypto_tfm *tfm, const u8 *in_key,
unsigned int key_len)
@@ -85,7 +89,6 @@ static int __maybe_unused crypto_aes_cmac_digest(struct shash_desc *desc,
return 0;
}
-static_assert(__alignof__(struct aes_enckey) <= CRYPTO_MINALIGN);
#define AES_CBCMAC_KEY(tfm) ((struct aes_enckey *)crypto_shash_ctx(tfm))
#define AES_CBCMAC_CTX(desc) ((struct aes_cbcmac_ctx *)shash_desc_ctx(desc))
@@ -200,6 +203,149 @@ static struct shash_alg mac_algs[] = {
#endif
};
+static __maybe_unused int
+crypto_aes_skcipher_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
+ unsigned int key_len)
+{
+ struct aes_key *key = crypto_skcipher_ctx(tfm);
+
+ return aes_preparekey(key, in_key, key_len);
+}
+
+static __maybe_unused int
+crypto_aes_skcipher_setenckey(struct crypto_skcipher *tfm, const u8 *in_key,
+ unsigned int key_len)
+{
+ struct aes_enckey *key = crypto_skcipher_ctx(tfm);
+
+ return aes_prepareenckey(key, in_key, key_len);
+}
+
+/*
+ * Call crypt_func() (a function that operates on simple virtual addresses) zero
+ * or more times to en/decrypt 'cryptlen' bytes of data from the source
+ * scatterlist 'src' and write it into the destination scatterlist 'dst',
+ * starting at 'start_pos' bytes into both.
+ *
+ * This always calls crypt_func() with a length that's a multiple of
+ * AES_BLOCK_SIZE, except the last call which includes any remainder. This is
+ * implemented by using an on-stack bounce buffer when necessary. The current
+ * implementation also tries to prefer passing at least 4 blocks, so e.g.
+ * scatterlist entries [16,16,16,16] result in a single 64-byte call.
+ *
+ * The scatterlists must describe either entirely different memory
+ * (out-of-place) or entirely the same memory (in-place). In the latter case,
+ * crypt_func() is always called with the source and dest pointers the same.
+ */
+#define AES_CRYPT_SG(crypt_func, dst, src, cryptlen, start_pos, ...) \
+ ({ \
+ unsigned int remaining = (cryptlen); \
+ \
+ if ((remaining) != 0) { \
+ struct scatter_walk src_walk, dst_walk; \
+ u8 tmp[4 * AES_BLOCK_SIZE] __aligned( \
+ __alignof__(long)); \
+ \
+ scatterwalk_start_at_pos(&src_walk, (src), \
+ (start_pos)); \
+ scatterwalk_start_at_pos(&dst_walk, (dst), \
+ (start_pos)); \
+ do { \
+ unsigned int src_avail = scatterwalk_clamp( \
+ &src_walk, (remaining)); \
+ unsigned int dst_avail = scatterwalk_clamp( \
+ &dst_walk, (remaining)); \
+ unsigned int n = min(src_avail, dst_avail); \
+ const u8 *src_virt; \
+ u8 *dst_virt; \
+ \
+ if (n < (remaining)) { \
+ if (n < sizeof(tmp)) { \
+ n = min((remaining), \
+ sizeof(tmp)); \
+ memcpy_from_scatterwalk( \
+ tmp, &src_walk, n); \
+ crypt_func(tmp, tmp, n, \
+ ##__VA_ARGS__); \
+ memcpy_to_scatterwalk( \
+ &dst_walk, tmp, n); \
+ (remaining) -= n; \
+ continue; \
+ } \
+ n = round_down(n, AES_BLOCK_SIZE); \
+ } \
+ \
+ scatterwalk_map(&dst_walk); \
+ dst_virt = dst_walk.addr; \
+ if (IS_ENABLED(CONFIG_HIGHMEM) && \
+ offset_in_page(src_walk.offset) == \
+ offset_in_page(dst_walk.offset) && \
+ sg_page(src_walk.sg) + (src_walk.offset / \
+ PAGE_SIZE) == \
+ sg_page(dst_walk.sg) + \
+ (dst_walk.offset / \
+ PAGE_SIZE)) { \
+ src_virt = dst_virt; \
+ } else { \
+ scatterwalk_map(&src_walk); \
+ src_virt = src_walk.addr; \
+ } \
+ crypt_func(dst_virt, src_virt, n, \
+ ##__VA_ARGS__); \
+ if (src_virt != dst_virt) \
+ scatterwalk_unmap(&src_walk); \
+ scatterwalk_advance(&src_walk, n); \
+ scatterwalk_done_dst(&dst_walk, n); \
+ (remaining) -= n; \
+ } while (remaining); \
+ memzero_explicit(tmp, sizeof(tmp)); \
+ } \
+ })
+
+/* AES-ECB */
+
+static __maybe_unused int crypto_aes_ecb_encrypt(struct skcipher_request *req)
+{
+ const struct aes_key *key =
+ crypto_skcipher_ctx(crypto_skcipher_reqtfm(req));
+
+ if (unlikely(req->cryptlen % AES_BLOCK_SIZE))
+ return -EINVAL;
+ AES_CRYPT_SG(aes_ecb_encrypt, req->dst, req->src, req->cryptlen, 0,
+ key);
+ return 0;
+}
+
+static __maybe_unused int crypto_aes_ecb_decrypt(struct skcipher_request *req)
+{
+ const struct aes_key *key =
+ crypto_skcipher_ctx(crypto_skcipher_reqtfm(req));
+
+ if (unlikely(req->cryptlen % AES_BLOCK_SIZE))
+ return -EINVAL;
+ AES_CRYPT_SG(aes_ecb_decrypt, req->dst, req->src, req->cryptlen, 0,
+ key);
+ return 0;
+}
+
+static struct skcipher_alg skcipher_algs[] = {
+#if IS_ENABLED(CONFIG_CRYPTO_ECB)
+ {
+ .base.cra_name = "ecb(aes)",
+ .base.cra_driver_name = "ecb-aes-lib",
+ .base.cra_priority = 110,
+ .base.cra_blocksize = AES_BLOCK_SIZE,
+ .base.cra_ctxsize = sizeof(struct aes_key),
+ .base.cra_module = THIS_MODULE,
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .setkey = crypto_aes_skcipher_setkey,
+ .encrypt = crypto_aes_ecb_encrypt,
+ .decrypt = crypto_aes_ecb_decrypt,
+ },
+#endif
+};
+
static int __init crypto_aes_mod_init(void)
{
int err = crypto_register_alg(&alg);
@@ -212,8 +358,18 @@ static int __init crypto_aes_mod_init(void)
if (err)
goto err_unregister_alg;
} /* Else, CONFIG_CRYPTO_HASH might not be enabled. */
+
+ if (ARRAY_SIZE(skcipher_algs) > 0) {
+ err = crypto_register_skciphers(skcipher_algs,
+ ARRAY_SIZE(skcipher_algs));
+ if (err)
+ goto err_unregister_macs;
+ }
return 0;
+err_unregister_macs:
+ if (ARRAY_SIZE(mac_algs) > 0)
+ crypto_unregister_shashes(mac_algs, ARRAY_SIZE(mac_algs));
err_unregister_alg:
crypto_unregister_alg(&alg);
return err;
@@ -222,6 +378,9 @@ module_init(crypto_aes_mod_init);
static void __exit crypto_aes_mod_exit(void)
{
+ if (ARRAY_SIZE(skcipher_algs) > 0)
+ crypto_unregister_skciphers(skcipher_algs,
+ ARRAY_SIZE(skcipher_algs));
if (ARRAY_SIZE(mac_algs) > 0)
crypto_unregister_shashes(mac_algs, ARRAY_SIZE(mac_algs));
crypto_unregister_alg(&alg);
@@ -245,3 +404,7 @@ MODULE_ALIAS_CRYPTO("xcbc-aes-lib");
MODULE_ALIAS_CRYPTO("cbcmac(aes)");
MODULE_ALIAS_CRYPTO("cbcmac-aes-lib");
#endif
+#if IS_ENABLED(CONFIG_CRYPTO_ECB)
+MODULE_ALIAS_CRYPTO("ecb(aes)");
+MODULE_ALIAS_CRYPTO("ecb-aes-lib");
+#endif
--
2.54.0
next prev parent reply other threads:[~2026-07-07 5:37 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-07 5:34 [PATCH 00/33] Library APIs for AES encryption modes Eric Biggers
2026-07-07 5:34 ` [PATCH 01/33] crypto: xts - Split out __xts_verify_key() helper Eric Biggers
2026-07-07 13:20 ` Thomas Huth
2026-07-07 5:34 ` [PATCH 02/33] lib/crypto: aes: Add ECB support Eric Biggers
2026-07-07 13:59 ` Thomas Huth
2026-07-07 19:22 ` Eric Biggers
2026-07-08 5:29 ` Thomas Huth
2026-07-07 5:34 ` [PATCH 03/33] lib/crypto: aes: Add CBC and CBC-CTS support Eric Biggers
2026-07-09 13:06 ` Thomas Huth
2026-07-13 23:37 ` Eric Biggers
2026-07-07 5:34 ` [PATCH 04/33] lib/crypto: aes: Add CTR and XCTR support Eric Biggers
2026-07-13 8:39 ` Thomas Huth
2026-07-13 23:54 ` Eric Biggers
2026-07-14 4:53 ` Thomas Huth
2026-07-07 5:34 ` [PATCH 05/33] lib/crypto: aes: Add XTS support Eric Biggers
2026-07-13 12:15 ` Thomas Huth
2026-07-14 0:23 ` Eric Biggers
2026-07-07 5:34 ` [PATCH 06/33] lib/crypto: aes: Add GCM support Eric Biggers
2026-07-07 5:34 ` [PATCH 07/33] lib/crypto: aes: Add CCM support Eric Biggers
2026-07-07 5:34 ` Eric Biggers [this message]
2026-07-07 5:34 ` [PATCH 09/33] crypto: aes - Add CBC and CBC-CTS support using library Eric Biggers
2026-07-07 5:34 ` [PATCH 10/33] crypto: aes - Add CTR and XCTR " Eric Biggers
2026-07-07 5:34 ` [PATCH 11/33] crypto: aes - Add XTS " Eric Biggers
2026-07-07 5:34 ` [PATCH 12/33] crypto: aes - Add GCM " Eric Biggers
2026-07-07 5:34 ` [PATCH 13/33] crypto: aes - Add CCM " Eric Biggers
2026-07-07 5:34 ` [PATCH 14/33] x86/sev: Use new AES-GCM library Eric Biggers
2026-07-07 5:34 ` [PATCH 15/33] lib/crypto: aesgcm: Remove old " Eric Biggers
2026-07-07 5:34 ` [PATCH 16/33] crypto: aes - Remove AES-CBC-MAC support Eric Biggers
2026-07-07 5:34 ` [PATCH 17/33] lib/crypto: aes: Remove aes_cbcmac_* functions Eric Biggers
2026-07-07 5:34 ` [PATCH 18/33] fscrypt: Use aes_ecb_encrypt() for v1 key derivation Eric Biggers
2026-07-07 5:34 ` [PATCH 19/33] KEYS: encrypted: Use AES-CBC library instead of crypto_skcipher Eric Biggers
2026-07-07 5:34 ` [PATCH 20/33] KEYS: trusted: dcp: Use AES-GCM library instead of crypto_aead Eric Biggers
2026-07-07 5:34 ` [PATCH 21/33] libceph: Use AES-CBC library in ceph_aes_crypt() Eric Biggers
2026-07-07 5:34 ` [PATCH 22/33] libceph: Reimplement messenger v2 encryption using AES-GCM library Eric Biggers
2026-07-07 5:34 ` [PATCH 23/33] wifi: mac80211: Use AES-CTR library in fils_aead.c Eric Biggers
2026-07-07 5:34 ` [PATCH 24/33] wifi: mac80211: Use AES-GCM library for GMAC suite Eric Biggers
2026-07-07 5:34 ` [PATCH 25/33] wifi: mac80211: Use crypto libraries for GCMP and CCMP suites Eric Biggers
2026-07-07 5:34 ` [PATCH 26/33] macsec: Use AES-GCM library instead of crypto_aead Eric Biggers
2026-07-07 5:34 ` [PATCH 27/33] wifi: ipw2x00: Use AES-CCM library Eric Biggers
2026-07-07 5:34 ` [PATCH 28/33] mac802154: Use AES-CCM and AES-CTR libraries Eric Biggers
2026-07-07 5:34 ` [PATCH 29/33] bpf: crypto: Use AES-CBC and AES-ECB libraries Eric Biggers
2026-07-07 15:01 ` Vadim Fedorenko
2026-07-07 18:20 ` Eric Biggers
2026-07-07 22:50 ` Vadim Fedorenko
2026-07-07 23:16 ` Eric Biggers
2026-07-08 11:47 ` Vadim Fedorenko
2026-07-09 15:47 ` Eric Biggers
2026-07-09 16:46 ` Vadim Fedorenko
2026-07-07 5:35 ` [PATCH 30/33] bpf: crypto: Add AES-GCM support Eric Biggers
2026-07-07 15:02 ` Vadim Fedorenko
2026-07-07 5:35 ` [PATCH 31/33] smb: client: Use AES-GCM and AES-CCM libraries Eric Biggers
2026-07-07 5:35 ` [PATCH 32/33] ksmbd: " Eric Biggers
2026-07-07 10:51 ` Namjae Jeon
2026-07-07 5:35 ` [PATCH 33/33] net: tipc: Use AES-GCM library instead of crypto_aead Eric Biggers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260707053503.209874-9-ebiggers@kernel.org \
--to=ebiggers@kernel.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.