From: Lee Jones <lee@kernel.org>
To: lee@kernel.org, Ping Cheng <ping.cheng@wacom.com>,
Jason Gerecke <jason.gerecke@wacom.com>,
Jiri Kosina <jikos@kernel.org>,
Benjamin Tissoires <bentiss@kernel.org>,
Aaron Skomra <aaron.skomra@wacom.com>,
Peter Hutterer <peter.hutterer@who-t.net>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/4] HID: wacom: Advertise SW_MUTE_DEVICE capability prior to registration
Date: Tue, 7 Jul 2026 12:10:40 +0000 [thread overview]
Message-ID: <20260707121051.1683937-1-lee@kernel.org> (raw)
Input subsystem guidelines require that device capabilities are advertised
before the input device is registered. The Wacom driver was violating
this by advertising the SW_MUTE_DEVICE capability post-registration in
wacom_set_shared_values() (and duplicating it in device-specific setup
cases).
Resolve this by moving the SW_MUTE_DEVICE capability setup to
wacom_setup_touch_input_capabilities() for all touch devices that support
it, excluding TabletPC devices.
Additionally, replace the lookup-dependent
'wacom_wac->shared->touch->product' references with 'hdev->product'
inside wacom_setup_touch_input_capabilities() as 'hdev' is already
available and represents the touch device itself.
Fixes: d2ec58aee8b1 ("HID: wacom: generic: support generic touch switch")
Signed-off-by: Lee Jones <lee@kernel.org>
---
v4 -> v5: New patch used to split out SW_MUTE_DEVICE as per Jason's request
drivers/hid/wacom_sys.c | 6 ------
drivers/hid/wacom_wac.c | 21 +++++++++++++--------
2 files changed, 13 insertions(+), 14 deletions(-)
diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index 2220168bf116..60b380efdfb7 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -2361,12 +2361,6 @@ static void wacom_set_shared_values(struct wacom_wac *wacom_wac)
wacom_wac->shared->is_touch_on = true;
}
- if (wacom_wac->shared->has_mute_touch_switch &&
- wacom_wac->shared->touch_input) {
- set_bit(EV_SW, wacom_wac->shared->touch_input->evbit);
- input_set_capability(wacom_wac->shared->touch_input, EV_SW,
- SW_MUTE_DEVICE);
- }
}
static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index da1f0ea85625..a31325be50f8 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -3951,6 +3951,8 @@ int wacom_setup_pen_input_capabilities(struct input_dev *input_dev,
int wacom_setup_touch_input_capabilities(struct input_dev *input_dev,
struct wacom_wac *wacom_wac)
{
+ struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
+ struct hid_device *hdev = wacom->hdev;
struct wacom_features *features = &wacom_wac->features;
if (!(features->device_type & WACOM_DEVICETYPE_TOUCH))
@@ -3961,9 +3963,14 @@ int wacom_setup_touch_input_capabilities(struct input_dev *input_dev,
else
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
- if (features->type == HID_GENERIC)
+ if (features->type == HID_GENERIC) {
+ if (wacom_wac->shared && wacom_wac->shared->has_mute_touch_switch) {
+ input_dev->evbit[0] |= BIT_MASK(EV_SW);
+ __set_bit(SW_MUTE_DEVICE, input_dev->swbit);
+ }
/* setup has already been done */
return 0;
+ }
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
__set_bit(BTN_TOUCH, input_dev->keybit);
@@ -3995,19 +4002,17 @@ int wacom_setup_touch_input_capabilities(struct input_dev *input_dev,
input_dev->evbit[0] |= BIT_MASK(EV_SW);
__set_bit(SW_MUTE_DEVICE, input_dev->swbit);
- if (wacom_wac->shared->touch->product == 0x361) {
+ if (hdev->product == 0x361) {
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
0, 12440, 4, 0);
input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
0, 8640, 4, 0);
- }
- else if (wacom_wac->shared->touch->product == 0x360) {
+ } else if (hdev->product == 0x360) {
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
0, 8960, 4, 0);
input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
0, 5920, 4, 0);
- }
- else if (wacom_wac->shared->touch->product == 0x393) {
+ } else if (hdev->product == 0x393) {
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
0, 6400, 4, 0);
input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
@@ -4037,8 +4042,8 @@ int wacom_setup_touch_input_capabilities(struct input_dev *input_dev,
fallthrough;
case WACOM_27QHDT:
- if (wacom_wac->shared->touch->product == 0x32C ||
- wacom_wac->shared->touch->product == 0xF6) {
+ if (hdev->product == 0x32C ||
+ hdev->product == 0xF6) {
input_dev->evbit[0] |= BIT_MASK(EV_SW);
__set_bit(SW_MUTE_DEVICE, input_dev->swbit);
wacom_wac->has_mute_touch_switch = true;
--
2.55.0.rc2.803.g1fd1e6609c-goog
next reply other threads:[~2026-07-07 12:11 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-07 12:10 Lee Jones [this message]
2026-07-07 12:10 ` [PATCH 2/4] HID: wacom: Fix Use-After-Free in wacom_intuos_pad Lee Jones
2026-07-07 12:26 ` sashiko-bot
2026-07-07 12:10 ` [PATCH 3/4] HID: wacom: Fix Use-After-Free in wacom_bamboo_pad Lee Jones
2026-07-07 12:27 ` sashiko-bot
2026-07-07 12:10 ` [PATCH 4/4] HID: wacom: Redesign shared sibling data lifecycle Lee Jones
2026-07-07 12:25 ` sashiko-bot
2026-07-07 12:28 ` [PATCH 1/4] HID: wacom: Advertise SW_MUTE_DEVICE capability prior to registration sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260707121051.1683937-1-lee@kernel.org \
--to=lee@kernel.org \
--cc=aaron.skomra@wacom.com \
--cc=bentiss@kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jason.gerecke@wacom.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peter.hutterer@who-t.net \
--cc=ping.cheng@wacom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.