All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ibrahim Hashimov <security@auditcode.ai>
To: Louis Chauvet <louis.chauvet@bootlin.com>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	David Airlie <airlied@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>,
	Simona Vetter <simona@ffwll.ch>,
	Melissa Wen <melissa.srw@gmail.com>,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	stable@vger.kernel.org
Subject: [PATCH] drm/vkms: Fix UAF between connector configfs rmdir and .detect
Date: Thu,  9 Jul 2026 17:06:37 +0200	[thread overview]
Message-ID: <20260709150637.45052-1-security@auditcode.ai> (raw)

vkms_connector_detect() walks config->connectors via
vkms_config_for_each_connector(), which expands to a plain
list_for_each_entry() over vkms_config::connectors with no lock and no
RCU protection.

Concurrently, rmdir'ing a connector's configfs directory calls
connector_release(), which takes the configfs device mutex
(connector->dev->lock) and calls vkms_config_destroy_connector(),
which does:

	list_del(&connector_cfg->link);
	kfree(connector_cfg);

Unlike make_crtc_group()/make_plane_group()/make_encoder_group()/
make_connector_group() and the possible_crtcs/possible_encoders
allow_link() callbacks -- all of which refuse the operation with
-EBUSY while the device is enabled -- connector_release() has no such
guard, and in fact cannot be given one: release() runs after configfs
has already committed to removing the directory, so it cannot fail the
rmdir(2) syscall with -EBUSY. A connector's configfs directory can
therefore be removed, and its vkms_config_connector freed, at any time
while the device is live and its DRM connector is still being probed.

vkms_connector_detect() is reached from userspace by writing "detect"
to /sys/class/drm/<card>-<conn>/status (drm_sysfs status_store() ->
drm_helper_probe_single_connector_modes() -> .detect), which runs under
drm_device.mode_config.mutex. Nothing prevents this from running at
the same time as the configfs rmdir above, since the two paths take
entirely different locks (configfs connector->dev->lock vs. DRM's
mode_config.mutex) over the same vkms_config_connector object. Both
sides require local root/CAP_SYS_ADMIN: the vkms configfs tree is
root-owned (0755) and the connector's sysfs status attribute is
root-writable by default, so this is a local-root race, not an
unprivileged-user or remote issue.

The result is a classic race-into-use-after-free: the unlocked iterator
dereferences connector_cfg->connector or follows connector_cfg->link
into memory that connector_release() has already kfree()'d, or reads
connector_cfg->status out of freed memory. This reproduces as a KASAN
slab-use-after-free in vkms_connector_detect() under a detect-hammer
vs. connector-rmdir stress loop.

A tempting minimal fix is to have vkms_connector_detect() take the
same configfs device lock (connector->dev->lock) that
connector_release() already holds while unlinking/freeing. That would
deadlock: vkms_destroy() (reached from device_enabled_store() while
connector->dev->lock is held) calls drm_dev_unregister() and
drm_atomic_helper_shutdown(), both of which take
drm_device.mode_config.mutex internally. That establishes lock order
configfs-lock -> mode_config.mutex on the teardown path, while
vkms_connector_detect() always runs already holding
mode_config.mutex -- so having it additionally acquire the configfs
lock would order it mode_config.mutex -> configfs-lock, the exact
reverse (ABBA).

Fix the race with RCU instead, decoupling the free side from the read
side without introducing a new lock-ordering constraint:

  - vkms_config_create_connector() links with list_add_tail_rcu()
    instead of list_add_tail().
  - vkms_config_destroy_connector() unlinks with list_del_rcu() instead
    of list_del(), and defers the actual free with kfree_rcu() instead
    of kfree(). xa_destroy() of connector_cfg->possible_encoders still
    runs synchronously, which is safe because no RCU reader (i.e.
    vkms_connector_detect()) ever touches that field.
  - A new vkms_config_for_each_connector_rcu() iterator
    (list_for_each_entry_rcu()) is added alongside the existing
    vkms_config_for_each_connector() for the other (non-concurrent,
    configfs-lock-serialized) call sites, and used only in
    vkms_connector_detect(), wrapped in rcu_read_lock()/
    rcu_read_unlock().

This is the same pattern DRM core already uses to let connector
iteration (drm_connector_list_iter) survive concurrent connector
teardown without holding mode_config.mutex across the whole walk;
here it is applied locally to vkms's own configfs connector list,
matching the existing "protect the config lists, use RCU when a
reader can't take the writer's lock" discipline already present in
the file.

No other vkms_config_for_each_connector() call site (vkms_output.c,
vkms_config.c is_valid()/debugfs helpers) races a concurrent free:
they all run either at device-build time (single-threaded) or already
under connector->dev->lock, so they are left untouched to keep the fix
minimal and scoped to the reported sink.

Verified on a v6.19 KASAN-instrumented build: a detect-hammer vs.
connector-rmdir stress loop reliably tripped a "KASAN: slab-use-after-
free in vkms_connector_detect" report before this patch; with the fix
applied, the same stress loop no longer produces any KASAN report.

Fixes: 466f43885ac0 ("drm/vkms: Allow to update the connector status")
Cc: stable@vger.kernel.org
Signed-off-by: Ibrahim Hashimov <security@auditcode.ai>
Assisted-by: AuditCode-AI:2026.07
---
 drivers/gpu/drm/vkms/vkms_config.c    | 24 +++++++++++++++++++++---
 drivers/gpu/drm/vkms/vkms_config.h    | 22 ++++++++++++++++++++++
 drivers/gpu/drm/vkms/vkms_connector.c | 16 +++++++++++++++-
 3 files changed, 58 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/vkms/vkms_config.c b/drivers/gpu/drm/vkms/vkms_config.c
index 5a654d6dead8..fc402cf48775 100644
--- a/drivers/gpu/drm/vkms/vkms_config.c
+++ b/drivers/gpu/drm/vkms/vkms_config.c
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 
+#include <linux/rculist.h>
+#include <linux/rcupdate.h>
 #include <linux/slab.h>
 
 #include <drm/drm_print.h>
@@ -599,7 +601,12 @@ struct vkms_config_connector *vkms_config_create_connector(struct vkms_config *c
 	connector_cfg->status = connector_status_connected;
 	xa_init_flags(&connector_cfg->possible_encoders, XA_FLAGS_ALLOC);
 
-	list_add_tail(&connector_cfg->link, &config->connectors);
+	/*
+	 * Paired with vkms_config_for_each_connector_rcu() in
+	 * vkms_connector_detect(), which may walk this list without holding
+	 * the configfs device lock.
+	 */
+	list_add_tail_rcu(&connector_cfg->link, &config->connectors);
 
 	return connector_cfg;
 }
@@ -608,8 +615,19 @@ EXPORT_SYMBOL_IF_KUNIT(vkms_config_create_connector);
 void vkms_config_destroy_connector(struct vkms_config_connector *connector_cfg)
 {
 	xa_destroy(&connector_cfg->possible_encoders);
-	list_del(&connector_cfg->link);
-	kfree(connector_cfg);
+
+	/*
+	 * connector_release() (vkms_configfs.c) can free a connector while
+	 * vkms_connector_detect() is concurrently walking the connectors list
+	 * under its own RCU read-side critical section (it cannot take the
+	 * configfs device lock: it already runs under
+	 * drm_device.mode_config.mutex, and vkms_destroy() takes the two
+	 * locks in the opposite order, so plain locking here would deadlock).
+	 * Unlink with the RCU-safe primitive and defer the free to after a
+	 * grace period so concurrent readers never dereference freed memory.
+	 */
+	list_del_rcu(&connector_cfg->link);
+	kfree_rcu(connector_cfg, rcu);
 }
 EXPORT_SYMBOL_IF_KUNIT(vkms_config_destroy_connector);
 
diff --git a/drivers/gpu/drm/vkms/vkms_config.h b/drivers/gpu/drm/vkms/vkms_config.h
index 8f7f286a4bdd..127076a9280b 100644
--- a/drivers/gpu/drm/vkms/vkms_config.h
+++ b/drivers/gpu/drm/vkms/vkms_config.h
@@ -4,6 +4,7 @@
 #define _VKMS_CONFIG_H_
 
 #include <linux/list.h>
+#include <linux/rculist.h>
 #include <linux/types.h>
 #include <linux/xarray.h>
 
@@ -108,6 +109,9 @@ struct vkms_config_encoder {
  *             It can be used to store a temporary reference to a VKMS connector
  *             during device creation. This pointer is not managed by the
  *             configuration and must be managed by other means.
+ * @rcu: Used to free the connector configuration after a grace period, so that
+ *       vkms_config_for_each_connector_rcu() readers (e.g. .detect) can safely
+ *       run concurrently with configfs teardown (see vkms_config_destroy_connector()).
  */
 struct vkms_config_connector {
 	struct list_head link;
@@ -118,6 +122,8 @@ struct vkms_config_connector {
 
 	/* Internal usage */
 	struct vkms_connector *connector;
+
+	struct rcu_head rcu;
 };
 
 /**
@@ -152,6 +158,22 @@ struct vkms_config_connector {
 #define vkms_config_for_each_connector(config, connector_cfg) \
 	list_for_each_entry((connector_cfg), &(config)->connectors, link)
 
+/**
+ * vkms_config_for_each_connector_rcu - RCU-safe iteration over the vkms_config
+ * connectors
+ * @config: &struct vkms_config pointer
+ * @connector_cfg: &struct vkms_config_connector pointer used as cursor
+ *
+ * Unlike vkms_config_for_each_connector(), this may be used without holding
+ * the configfs device lock, from contexts (such as &drm_connector_funcs.detect)
+ * that must not block on it. Callers must wrap the iteration in
+ * rcu_read_lock() / rcu_read_unlock(); see vkms_config_destroy_connector(),
+ * which pairs with this by unlinking with list_del_rcu() and freeing with
+ * kfree_rcu().
+ */
+#define vkms_config_for_each_connector_rcu(config, connector_cfg) \
+	list_for_each_entry_rcu((connector_cfg), &(config)->connectors, link)
+
 /**
  * vkms_config_plane_for_each_possible_crtc - Iterate over the vkms_config_plane
  * possible CRTCs
diff --git a/drivers/gpu/drm/vkms/vkms_connector.c b/drivers/gpu/drm/vkms/vkms_connector.c
index b0a6b212d3f4..c43948de2b01 100644
--- a/drivers/gpu/drm/vkms/vkms_connector.c
+++ b/drivers/gpu/drm/vkms/vkms_connector.c
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 
+#include <linux/rcupdate.h>
+
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_managed.h>
@@ -26,10 +28,22 @@ static enum drm_connector_status vkms_connector_detect(struct drm_connector *con
 	 */
 	status = connector->status;
 
-	vkms_config_for_each_connector(vkmsdev->config, connector_cfg) {
+	/*
+	 * configfs can free connector_cfg concurrently (connector_release() ->
+	 * vkms_config_destroy_connector(), on an rmdir of the connector's
+	 * configfs directory) without taking drm_device.mode_config.mutex,
+	 * which this .detect callback is always called under. Walk the RCU-
+	 * protected list instead of taking the configfs device lock here: the
+	 * two locks are already nested in the opposite order by
+	 * vkms_destroy(), so acquiring the configfs lock from under
+	 * mode_config.mutex would deadlock.
+	 */
+	rcu_read_lock();
+	vkms_config_for_each_connector_rcu(vkmsdev->config, connector_cfg) {
 		if (connector_cfg->connector == vkms_connector)
 			status = vkms_config_connector_get_status(connector_cfg);
 	}
+	rcu_read_unlock();
 
 	return status;
 }
-- 
2.50.1 (Apple Git-155)


             reply	other threads:[~2026-07-09 15:07 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-09 15:06 Ibrahim Hashimov [this message]
2026-07-09 15:21 ` [PATCH] drm/vkms: Fix UAF between connector configfs rmdir and .detect sashiko-bot
2026-07-09 19:51 ` [PATCH v2] " Ibrahim Hashimov
2026-07-09 20:06   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260709150637.45052-1-security@auditcode.ai \
    --to=security@auditcode.ai \
    --cc=airlied@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=hamohammed.sa@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=louis.chauvet@bootlin.com \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=melissa.srw@gmail.com \
    --cc=mripard@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=stable@vger.kernel.org \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.