[PATCH 5.15.y] ACPI: CPPC: Suppress UBSAN warning caused by field misuse

[Sasha Levin <sashal@kernel.org>]

From: Jeremy Linton <jeremy.linton@arm.com>

[ Upstream commit 1b1acf2dada0cc3931bb2cb9ff8832edfbee46a1 ]

The definition of reg->access_width changes depending on the
reg->space_id type.  Type ACPI_ADR_SPACE_PLATFORM_COMM uses
access_width to indicate the PCC region, which can result in a UBSAN
if the value is greater than 4.

For example:

 UBSAN: shift-out-of-bounds in drivers/acpi/cppc_acpi.c:1090:9
 shift exponent 32 is too large for 32-bit type 'int'
 CPU: 61 UID: 0 PID: 1220 Comm: (udev-worker) Not tainted 7.0.10-201.fc44.aarch64 #1 PREEMPT(lazy)
 Hardware name: To be filled by O.E.M.
 Call trace:
  ...(trimming)
  ubsan_epilogue+0x10/0x48
  __ubsan_handle_shift_out_of_bounds+0xdc/0x1e0
  cpc_write+0x4d0/0x670
  cppc_set_perf+0x18c/0x490
  cppc_cpufreq_cpu_init+0x1c8/0x380 [cppc_cpufreq]
  ... (trimming)

Lets fix this by validating the region type, as well as whether
access_width has a value. Then since we are returning bit_width
directly for ACPI_ADR_SPACE_PLATFORM_COMM, drop the code correcting
the size.

Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Jarred White <jarredwhite@linux.microsoft.com>
Reviewed-by: Jarred White <jarredwhite@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@linux.microsoft.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260601235808.1113137-1-jeremy.linton@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/cppc_acpi.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index f86e68863a24ae..30c8799b1a6a8f 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -161,8 +161,13 @@ show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, nominal_freq);
 show_cppc_data(cppc_get_perf_ctrs, cppc_perf_fb_ctrs, reference_perf);
 show_cppc_data(cppc_get_perf_ctrs, cppc_perf_fb_ctrs, wraparound_time);
 
-/* Check for valid access_width, otherwise, fallback to using bit_width */
-#define GET_BIT_WIDTH(reg) ((reg)->access_width ? (8 << ((reg)->access_width - 1)) : (reg)->bit_width)
+/*
+ * PCC reuses the access_width field as the subspace id, so only decode access
+ * size for non-PCC registers. Otherwise, use the bit_width.
+ */
+#define GET_BIT_WIDTH(reg) (((reg)->access_width &&				\
+			     (reg)->space_id != ACPI_ADR_SPACE_PLATFORM_COMM) ? \
+			    (8 << ((reg)->access_width - 1)) : (reg)->bit_width)
 
 /* Shift and apply the mask for CPC reads/writes */
 #define MASK_VAL_READ(reg, val) (((val) >> (reg)->bit_offset) &				\
@@ -970,7 +975,6 @@ static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val)
 		 * by the bit width field; the access size is used to indicate
 		 * the PCC subspace id.
 		 */
-		size = reg->bit_width;
 		vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id);
 	}
 	else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
@@ -1030,7 +1034,6 @@ static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val)
 		 * by the bit width field; the access size is used to indicate
 		 * the PCC subspace id.
 		 */
-		size = reg->bit_width;
 		vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id);
 	}
 	else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
-- 
2.53.0