From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,sj@kernel.org,akpm@linux-foundation.org
Subject: + mm-damon-core-get-merge-threshold-from-probe-hits-when-weights-are-set.patch added to mm-new branch
Date: Fri, 10 Jul 2026 13:24:18 -0700 [thread overview]
Message-ID: <20260710202418.815AB1F000E9@smtp.kernel.org> (raw)
The patch titled
Subject: mm/damon/core: get merge threshold from probe hits when weights are set
has been added to the -mm mm-new branch. Its filename is
mm-damon-core-get-merge-threshold-from-probe-hits-when-weights-are-set.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/mm-damon-core-get-merge-threshold-from-probe-hits-when-weights-are-set.patch
This patch will later appear in the mm-new branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Note, mm-new is a provisional staging ground for work-in-progress
patches, and acceptance into mm-new is a notification for others take
notice and to finish up reviews. Please do not hesitate to respond to
review feedback and post updated versions to replace or incrementally
fixup patches in mm-new.
The mm-new branch of mm.git is not included in linux-next
If a few days of testing in mm-new is successful, the patch will me moved
into mm.git's mm-unstable branch, which is included in linux-next
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via various
branches at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there most days
------------------------------------------------------
From: SJ Park <sj@kernel.org>
Subject: mm/damon/core: get merge threshold from probe hits when weights are set
Date: Fri, 10 Jul 2026 06:46:43 -0700
When probe weights are set, DAMON merges regions based on their probe hits
weighted sum. But the merge threshold is calculated based on the access
frequency. Update it to retrieve the maximum probe hits weighted sum in
the snapshot from apply_probes() ops callback, and generate the threshold
based on it.
Link: https://lore.kernel.org/20260710134651.18084-15-sj@kernel.org
Signed-off-by: SJ Park <sj@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
mm/damon/core.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
--- a/mm/damon/core.c~mm-damon-core-get-merge-threshold-from-probe-hits-when-weights-are-set
+++ a/mm/damon/core.c
@@ -3763,7 +3763,8 @@ static int kdamond_fn(void *data)
unsigned long next_ops_update_sis = ctx->next_ops_update_sis;
unsigned long sample_interval = ctx->attrs.sample_interval;
bool access_check_disabled = damon_has_probe_weights(ctx);
- unsigned int max_merge_score = 0;
+ unsigned int max_merge_score = 0, max_wsum;
+ bool get_max_wsum;
if (kdamond_wait_activation(ctx))
break;
@@ -3776,9 +3777,18 @@ static int kdamond_fn(void *data)
if (!access_check_disabled && ctx->ops.check_accesses)
max_merge_score = ctx->ops.check_accesses(ctx);
- if (ctx->ops.apply_probes)
- ctx->ops.apply_probes(ctx, access_check_disabled,
- false);
+ if (ctx->ops.apply_probes) {
+ if (time_after_eq(ctx->passed_sample_intervals,
+ next_aggregation_sis) &&
+ access_check_disabled)
+ get_max_wsum = true;
+ else
+ get_max_wsum = false;
+ max_wsum = ctx->ops.apply_probes(ctx,
+ access_check_disabled, get_max_wsum);
+ if (get_max_wsum)
+ max_merge_score = max_wsum;
+ }
if (time_after_eq(ctx->passed_sample_intervals,
next_aggregation_sis)) {
_
Patches currently in -mm which might be from sj@kernel.org are
samples-damon-wsse-handle-damon_start-failure.patch
samples-damon-prcl-handle-damon_start-failure.patch
samples-damon-mtier-handle-damon_start-failure.patch
samples-damon-mtier-handle-damon_stop-failure.patch
samples-damon-wsse-stop-and-free-damon-ctx-when-damon_call-fails.patch
samples-damon-prcl-stop-and-free-damon-ctx-when-damon_call-fails.patch
mm-damon-sysfs-kobject_del-target-normal-context-and-kdamond-dirs.patch
mm-damon-sysfs-kobject_del-region-and-target-error-dirs.patch
mm-damon-sysfs-schemes-kobject_del-scheme-dirs.patch
mm-damon-sysfs-schemes-kobject_del-scheme-region-dirs.patch
mm-damon-sysfs-schemes-kobject_del-scheme-filter-dirs.patch
mm-damon-sysfs-schemes-kobject_del-scheme-quota-goal-dirs.patch
mm-damon-sysfs-schemes-kobject_del-scheme-action-destination-dirs.patch
mm-damon-sysfs-kobject_del-probe-dirs.patch
mm-damon-sysfs-kobject_del-probe-filter-dirs.patch
mm-damon-sysfs-kobject_del-probe-dirs-in-probes_addd_dir-error-path.patch
mm-damon-sysfs-schemes-kobject_del-region-for-populate_region-error.patch
docs-mm-damon-design-update-for-damos_quota_node_eligible_mem_bp.patch
docs-abi-damon-document-probe-files.patch
mm-damon-tests-core-kunit-test-damon_rand.patch
selftests-damon-sysfssh-test-multiple-probe-dirs-creation.patch
selftests-damon-sysfssh-test-coreops_filters-directories.patch
selftests-damon-sysfssh-test-dests-dir.patch
selftests-damon-sysfssh-test-all-files-in-quota-goal-dir.patch
mm-damon-core-reduce-range-setup-in-damon_commit_target_regions.patch
mm-damon-sysfs-split-probe-setup-function-out.patch
mm-damon-sysfs-split-out-filters-setup-function.patch
mm-damon-sysfs-fix-typos-in-probe_addrm_dirs-s-attr-probe.patch
mm-damon-core-introduce-damon_nr_accesses_mvsum.patch
mm-damon-tests-core-kunit-test-damon_mvsum.patch
mm-damon-core-always-update-last_nr_accesses-for-intervals-change.patch
mm-damon-core-handle-unreset-nr_accesses-in-damon_nr_accesses_mvsum.patch
mm-damon-core-use-damon_nr_accesses_mvsum-in-__damos_valid_target.patch
mm-damon-core-use-damon_nr_accesses_mvsum-for-damos-region-tracing.patch
mm-damon-sysfs-schemes-use-damon_nr_accesses_mvsum-for-damo-regions.patch
mm-damon-core-remove-damon_warn_fix_nr_accesses_corruption.patch
mm-damon-core-remove-damon_verify_reset_aggregated.patch
mm-damon-core-remove-damon_verify_merge_regions_of.patch
mm-damon-tests-core-kunit-remove-nr_accesses_bp-setup-and-tests.patch
selftests-damon-drgn_dump_damon_status-do-not-dump-nr_accesses_bp.patch
mm-damon-core-remove-nr_accesses_bp-setups-and-updates.patch
mm-damon-core-remove-attrs-param-from-damon_update_region_access_rate.patch
mm-damon-paddr-remove-attrs-param-from-__damon_pa_check_access.patch
mm-damon-vaddr-remove-attrs-param-from-__damon_va_check_access.patch
mm-damon-core-remove-damon_moving_sum-and-its-unit-test.patch
mm-damon-core-remove-damon_region-nr_accesses_bp.patch
mm-damon-add-damon_region-last_probe_hits.patch
mm-damon-core-introduce-damon_probe_hits_mvsum.patch
mm-damon-sysfs-schemes-set-probe-hits-as-pseudo-moving-sums.patch
mm-damon-core-safely-validate-src-on-damon_commit_ctx.patch
mm-damon-core-do-parameter-testing-commit-on-damon_start.patch
mm-damon-sysfs-remove-duplicated-commit-input-validity-check.patch
mm-damon-reclaim-remove-duplicated-min_region_sz-power-of-2-check.patch
mm-damon-lru_sort-remove-duplicated-min_region_sz-power_of_2-check.patch
mm-damon-document-region-size-validation-in-damon_set_regions.patch
mm-damon-core-remove-start-end-check-in-damon_set_region_system_rams.patch
mm-damon-sysfs-remove-region-size-validation.patch
mm-damon-core-stop-ctxs-in-damon_start-before-returning-an-error.patch
samples-damon-mtier-do-not-stop-first-context-for-damon_start-failure.patch
mm-damon-core-make-damon_stop-never-fails.patch
mm-damon-sysfs-ignore-damon_stop-return-value.patch
mm-damon-reclaaim-ignore-damon_stop-return-value.patch
mm-damon-lru_sort-ignore-damon_stop-return-value.patch
mm-damon-core-change-damon_stop-return-type-to-void.patch
samples-damon-mtier-stop-all-contexts-with-single-damon_stop-call.patch
mm-damon-core-wait-ctx-stop-in-damon_call-before-reruning-an-error.patch
samples-damon-wsse-do-not-stop-ctx-for-damon_call-failure.patch
samples-damon-prcl-do-not-stop-damon-for-damon_call-failure.patch
mm-damon-core-remove-comment-and-test-for-nr_to_bp-divide-by-zero.patch
mm-damon-core-s-damon_max_nr_accesses-damon_nr_samples_per_aggr.patch
mm-damon-core-s-accesses_bp_to_nr_accesses-sample_bp_to_count.patch
mm-damon-core-s-nr_accesses_to_accesses_bp-sample_count_to_bp.patch
mm-damon-core-s-nr_accesses_for_new_attrs-nr_samples_for_new_attrs.patch
mm-damon-core-update-probe-hits-for-new-parameter-commit.patch
mm-damon-core-handle-unreset-probe_hits-in-probe_hits_mvsum.patch
mm-damon-core-introduce-damon_probe-weight.patch
mm-damon-core-ask-apply_probes-ops-callback-to-set-sampling-address.patch
mm-damon-paddr-set-samples-in-apply_probes-if-requested.patch
mm-damon-core-ask-apply_probe-to-return-max-probe-hits-weighted-sum.patch
mm-damon-core-implement-damon_probe_hits_wsum.patch
mm-damon-paddr-respect-return_max_wsum.patch
mm-damon-core-use-abs_diff-instead-of-abs.patch
mm-damon-core-extend-merge-function-to-work-with-probe-hits.patch
mm-damon-core-disallow-probe_hits-overflow-on-attrs-only-monitoring.patch
mm-damon-core-validate-params-for-probe-hits-weighted-sum-overflow.patch
mm-damon-core-disable-access-monitoring-when-probe-weights-are-set.patch
mm-damon-core-set-samples-in-apply_probes-if-probe-weights-are-set.patch
mm-damon-core-s-max_nr_accesses-max_merge_score-in-kdamond_fn.patch
mm-damon-core-get-merge-threshold-from-probe-hits-when-weights-are-set.patch
mm-damon-core-implement-damon_has_probe_weight.patch
mm-damon-sysfs-implement-probe-weight-file.patch
docs-mm-damon-design-document-attrs-only-monitoring.patch
docs-admin-guide-mm-damon-usage-document-weight-sysfs-file.patch
docs-abi-damon-document-probe-weight-file.patch
reply other threads:[~2026-07-10 20:24 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260710202418.815AB1F000E9@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=mm-commits@vger.kernel.org \
--cc=sj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.