From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,sj@kernel.org,akpm@linux-foundation.org
Subject: + mm-damon-sysfs-implement-probe-weight-file.patch added to mm-new branch
Date: Fri, 10 Jul 2026 13:24:22 -0700 [thread overview]
Message-ID: <20260710202422.84D971F000E9@smtp.kernel.org> (raw)
The patch titled
Subject: mm/damon/sysfs: implement probe/weight file
has been added to the -mm mm-new branch. Its filename is
mm-damon-sysfs-implement-probe-weight-file.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/mm-damon-sysfs-implement-probe-weight-file.patch
This patch will later appear in the mm-new branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Note, mm-new is a provisional staging ground for work-in-progress
patches, and acceptance into mm-new is a notification for others take
notice and to finish up reviews. Please do not hesitate to respond to
review feedback and post updated versions to replace or incrementally
fixup patches in mm-new.
The mm-new branch of mm.git is not included in linux-next
If a few days of testing in mm-new is successful, the patch will me moved
into mm.git's mm-unstable branch, which is included in linux-next
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via various
branches at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there most days
------------------------------------------------------
From: SJ Park <sj@kernel.org>
Subject: mm/damon/sysfs: implement probe/weight file
Date: Fri, 10 Jul 2026 06:46:45 -0700
Implement a new sysfs file, 'weight', under probe directory. Users will
be able to set the probe weight and enable the attributes only monitoring
using it.
Link: https://lore.kernel.org/20260710134651.18084-17-sj@kernel.org
Signed-off-by: SJ Park <sj@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
mm/damon/sysfs.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
--- a/mm/damon/sysfs.c~mm-damon-sysfs-implement-probe-weight-file
+++ a/mm/damon/sysfs.c
@@ -1065,6 +1065,7 @@ static const struct kobj_type damon_sysf
struct damon_sysfs_probe {
struct kobject kobj;
+ unsigned int weight;
struct damon_sysfs_filters *filters;
};
@@ -1100,12 +1101,35 @@ static void damon_sysfs_probe_rm_dirs(st
}
}
+static ssize_t weight_show(struct kobject *kobj, struct kobj_attribute *attr,
+ char *buf)
+{
+ struct damon_sysfs_probe *probe = container_of(kobj,
+ struct damon_sysfs_probe, kobj);
+
+ return sysfs_emit(buf, "%u\n", probe->weight);
+}
+
+static ssize_t weight_store(struct kobject *kobj,
+ struct kobj_attribute *attr, const char *buf, size_t count)
+{
+ struct damon_sysfs_probe *probe = container_of(kobj,
+ struct damon_sysfs_probe, kobj);
+ int err = kstrtouint(buf, 0, &probe->weight);
+
+ return err ? err : count;
+}
+
static void damon_sysfs_probe_release(struct kobject *kobj)
{
kfree(container_of(kobj, struct damon_sysfs_probe, kobj));
}
+static struct kobj_attribute damon_sysfs_probe_weight_attr =
+ __ATTR_RW_MODE(weight, 0600);
+
static struct attribute *damon_sysfs_probe_attrs[] = {
+ &damon_sysfs_probe_weight_attr.attr,
NULL,
};
ATTRIBUTE_GROUPS(damon_sysfs_probe);
@@ -1965,6 +1989,7 @@ static int damon_sysfs_set_probes(struct
return -ENOMEM;
damon_add_probe(ctx, p);
sys_probe = sys_probes->probes_arr[i];
+ p->weight = sys_probe->weight;
err = damon_sysfs_set_probe(p, sys_probe);
if (err)
return err;
_
Patches currently in -mm which might be from sj@kernel.org are
samples-damon-wsse-handle-damon_start-failure.patch
samples-damon-prcl-handle-damon_start-failure.patch
samples-damon-mtier-handle-damon_start-failure.patch
samples-damon-mtier-handle-damon_stop-failure.patch
samples-damon-wsse-stop-and-free-damon-ctx-when-damon_call-fails.patch
samples-damon-prcl-stop-and-free-damon-ctx-when-damon_call-fails.patch
mm-damon-sysfs-kobject_del-target-normal-context-and-kdamond-dirs.patch
mm-damon-sysfs-kobject_del-region-and-target-error-dirs.patch
mm-damon-sysfs-schemes-kobject_del-scheme-dirs.patch
mm-damon-sysfs-schemes-kobject_del-scheme-region-dirs.patch
mm-damon-sysfs-schemes-kobject_del-scheme-filter-dirs.patch
mm-damon-sysfs-schemes-kobject_del-scheme-quota-goal-dirs.patch
mm-damon-sysfs-schemes-kobject_del-scheme-action-destination-dirs.patch
mm-damon-sysfs-kobject_del-probe-dirs.patch
mm-damon-sysfs-kobject_del-probe-filter-dirs.patch
mm-damon-sysfs-kobject_del-probe-dirs-in-probes_addd_dir-error-path.patch
mm-damon-sysfs-schemes-kobject_del-region-for-populate_region-error.patch
docs-mm-damon-design-update-for-damos_quota_node_eligible_mem_bp.patch
docs-abi-damon-document-probe-files.patch
mm-damon-tests-core-kunit-test-damon_rand.patch
selftests-damon-sysfssh-test-multiple-probe-dirs-creation.patch
selftests-damon-sysfssh-test-coreops_filters-directories.patch
selftests-damon-sysfssh-test-dests-dir.patch
selftests-damon-sysfssh-test-all-files-in-quota-goal-dir.patch
mm-damon-core-reduce-range-setup-in-damon_commit_target_regions.patch
mm-damon-sysfs-split-probe-setup-function-out.patch
mm-damon-sysfs-split-out-filters-setup-function.patch
mm-damon-sysfs-fix-typos-in-probe_addrm_dirs-s-attr-probe.patch
mm-damon-core-introduce-damon_nr_accesses_mvsum.patch
mm-damon-tests-core-kunit-test-damon_mvsum.patch
mm-damon-core-always-update-last_nr_accesses-for-intervals-change.patch
mm-damon-core-handle-unreset-nr_accesses-in-damon_nr_accesses_mvsum.patch
mm-damon-core-use-damon_nr_accesses_mvsum-in-__damos_valid_target.patch
mm-damon-core-use-damon_nr_accesses_mvsum-for-damos-region-tracing.patch
mm-damon-sysfs-schemes-use-damon_nr_accesses_mvsum-for-damo-regions.patch
mm-damon-core-remove-damon_warn_fix_nr_accesses_corruption.patch
mm-damon-core-remove-damon_verify_reset_aggregated.patch
mm-damon-core-remove-damon_verify_merge_regions_of.patch
mm-damon-tests-core-kunit-remove-nr_accesses_bp-setup-and-tests.patch
selftests-damon-drgn_dump_damon_status-do-not-dump-nr_accesses_bp.patch
mm-damon-core-remove-nr_accesses_bp-setups-and-updates.patch
mm-damon-core-remove-attrs-param-from-damon_update_region_access_rate.patch
mm-damon-paddr-remove-attrs-param-from-__damon_pa_check_access.patch
mm-damon-vaddr-remove-attrs-param-from-__damon_va_check_access.patch
mm-damon-core-remove-damon_moving_sum-and-its-unit-test.patch
mm-damon-core-remove-damon_region-nr_accesses_bp.patch
mm-damon-add-damon_region-last_probe_hits.patch
mm-damon-core-introduce-damon_probe_hits_mvsum.patch
mm-damon-sysfs-schemes-set-probe-hits-as-pseudo-moving-sums.patch
mm-damon-core-safely-validate-src-on-damon_commit_ctx.patch
mm-damon-core-do-parameter-testing-commit-on-damon_start.patch
mm-damon-sysfs-remove-duplicated-commit-input-validity-check.patch
mm-damon-reclaim-remove-duplicated-min_region_sz-power-of-2-check.patch
mm-damon-lru_sort-remove-duplicated-min_region_sz-power_of_2-check.patch
mm-damon-document-region-size-validation-in-damon_set_regions.patch
mm-damon-core-remove-start-end-check-in-damon_set_region_system_rams.patch
mm-damon-sysfs-remove-region-size-validation.patch
mm-damon-core-stop-ctxs-in-damon_start-before-returning-an-error.patch
samples-damon-mtier-do-not-stop-first-context-for-damon_start-failure.patch
mm-damon-core-make-damon_stop-never-fails.patch
mm-damon-sysfs-ignore-damon_stop-return-value.patch
mm-damon-reclaaim-ignore-damon_stop-return-value.patch
mm-damon-lru_sort-ignore-damon_stop-return-value.patch
mm-damon-core-change-damon_stop-return-type-to-void.patch
samples-damon-mtier-stop-all-contexts-with-single-damon_stop-call.patch
mm-damon-core-wait-ctx-stop-in-damon_call-before-reruning-an-error.patch
samples-damon-wsse-do-not-stop-ctx-for-damon_call-failure.patch
samples-damon-prcl-do-not-stop-damon-for-damon_call-failure.patch
mm-damon-core-remove-comment-and-test-for-nr_to_bp-divide-by-zero.patch
mm-damon-core-s-damon_max_nr_accesses-damon_nr_samples_per_aggr.patch
mm-damon-core-s-accesses_bp_to_nr_accesses-sample_bp_to_count.patch
mm-damon-core-s-nr_accesses_to_accesses_bp-sample_count_to_bp.patch
mm-damon-core-s-nr_accesses_for_new_attrs-nr_samples_for_new_attrs.patch
mm-damon-core-update-probe-hits-for-new-parameter-commit.patch
mm-damon-core-handle-unreset-probe_hits-in-probe_hits_mvsum.patch
mm-damon-core-introduce-damon_probe-weight.patch
mm-damon-core-ask-apply_probes-ops-callback-to-set-sampling-address.patch
mm-damon-paddr-set-samples-in-apply_probes-if-requested.patch
mm-damon-core-ask-apply_probe-to-return-max-probe-hits-weighted-sum.patch
mm-damon-core-implement-damon_probe_hits_wsum.patch
mm-damon-paddr-respect-return_max_wsum.patch
mm-damon-core-use-abs_diff-instead-of-abs.patch
mm-damon-core-extend-merge-function-to-work-with-probe-hits.patch
mm-damon-core-disallow-probe_hits-overflow-on-attrs-only-monitoring.patch
mm-damon-core-validate-params-for-probe-hits-weighted-sum-overflow.patch
mm-damon-core-disable-access-monitoring-when-probe-weights-are-set.patch
mm-damon-core-set-samples-in-apply_probes-if-probe-weights-are-set.patch
mm-damon-core-s-max_nr_accesses-max_merge_score-in-kdamond_fn.patch
mm-damon-core-get-merge-threshold-from-probe-hits-when-weights-are-set.patch
mm-damon-core-implement-damon_has_probe_weight.patch
mm-damon-sysfs-implement-probe-weight-file.patch
docs-mm-damon-design-document-attrs-only-monitoring.patch
docs-admin-guide-mm-damon-usage-document-weight-sysfs-file.patch
docs-abi-damon-document-probe-weight-file.patch
reply other threads:[~2026-07-10 20:24 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260710202422.84D971F000E9@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=mm-commits@vger.kernel.org \
--cc=sj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.