From: <gregkh@linuxfoundation.org>
To: trungnh@cystack.net,bentiss@kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] HID: multitouch: fix out-of-bounds bit access on mt_io_flags" failed to apply to 6.6-stable tree
Date: Tue, 14 Jul 2026 16:54:18 +0200 [thread overview]
Message-ID: <2026071417-praising-reconvene-e068@gregkh> (raw)
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 8813b0612275cc61fe9e6603d0ee019247ade6be
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026071417-praising-reconvene-e068@gregkh' --subject-prefix 'PATCH 6.6.y' 'HEAD^..'
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 8813b0612275cc61fe9e6603d0ee019247ade6be Mon Sep 17 00:00:00 2001
From: Trung Nguyen <trungnh@cystack.net>
Date: Thu, 2 Jul 2026 00:13:19 +0700
Subject: [PATCH] HID: multitouch: fix out-of-bounds bit access on mt_io_flags
mt_io_flags is a single unsigned long, but mt_process_slot(),
mt_release_pending_palms() and mt_release_contacts() use it as a
per-slot bitmap indexed by the slot number. That slot number is only
bounded by td->maxcontacts, which is taken from the device's
ContactCountMaximum feature report and can be up to 255, not by
BITS_PER_LONG.
As a result, a multitouch device that advertises a large contact count
makes set_bit()/clear_bit() operate past the mt_io_flags word and
corrupt the adjacent members of struct mt_device. The sticky-fingers
release timer is the easiest way to reach this. mt_release_contacts()
runs
for (i = 0; i < mt->num_slots; i++)
clear_bit(i, &td->mt_io_flags);
with num_slots == maxcontacts. For maxcontacts around 250 the loop
clears the bits that overlap td->applications.next, zeroing that list
head, and the list_for_each_entry() that immediately follows then
dereferences NULL. The kernel panics from timer (softirq) context. On a
KASAN build this shows up as a general protection fault in
mt_release_contacts() with a null-ptr-deref at offset 0x58, which is
offsetof(struct mt_application, num_received).
The state is reachable from an untrusted USB or Bluetooth HID
multitouch device; no local privileges are required.
Store the per-slot active state in a separately allocated bitmap sized
for maxcontacts, the same pattern already used for pending_palm_slots,
and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two
"mt_io_flags & MT_IO_SLOTS_MASK" arming checks become
bitmap_empty(td->active_slots, td->maxcontacts).
Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the
same commit to leave the low byte for the slot bits; with the slot bits
gone it fits in bit 0 again, which also keeps it within the unsigned
long on 32-bit.
Fixes: 46f781e0d151 ("HID: multitouch: fix sticky fingers")
Cc: stable@vger.kernel.org
Signed-off-by: Trung Nguyen <trungnh@cystack.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 0495152091e3..edb37b4c867e 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -31,6 +31,7 @@
* [1] https://gitlab.freedesktop.org/libevdev/hid-tools
*/
+#include <linux/bitmap.h>
#include <linux/bits.h>
#include <linux/device.h>
#include <linux/hid.h>
@@ -97,8 +98,7 @@ enum report_mode {
TOUCHPAD_REPORT_ALL = TOUCHPAD_REPORT_BUTTONS | TOUCHPAD_REPORT_CONTACTS,
};
-#define MT_IO_SLOTS_MASK GENMASK(7, 0) /* reserve first 8 bits for slot tracking */
-#define MT_IO_FLAGS_RUNNING 32
+#define MT_IO_FLAGS_RUNNING 0
static const bool mtrue = true; /* default for true */
static const bool mfalse; /* default for false */
@@ -174,10 +174,9 @@ struct mt_device {
struct timer_list release_timer; /* to release sticky fingers */
struct hid_haptic_device *haptic; /* haptic related configuration */
struct hid_device *hdev; /* hid_device we're attached to */
- unsigned long mt_io_flags; /* mt flags (MT_IO_FLAGS_RUNNING)
- * first 8 bits are reserved for keeping the slot
- * states, this is fine because we only support up
- * to 250 slots (MT_MAX_MAXCONTACT)
+ unsigned long mt_io_flags; /* mt flags (MT_IO_FLAGS_RUNNING) */
+ unsigned long *active_slots; /* bitmap of slots with an active
+ * contact, sized for maxcontacts
*/
__u8 inputmode_value; /* InputMode HID feature value */
__u8 maxcontacts;
@@ -1036,7 +1035,7 @@ static void mt_release_pending_palms(struct mt_device *td,
for_each_set_bit(slotnum, app->pending_palm_slots, td->maxcontacts) {
clear_bit(slotnum, app->pending_palm_slots);
- clear_bit(slotnum, &td->mt_io_flags);
+ clear_bit(slotnum, td->active_slots);
input_mt_slot(input, slotnum);
input_mt_report_slot_inactive(input);
@@ -1247,9 +1246,9 @@ static int mt_process_slot(struct mt_device *td, struct input_dev *input,
input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, major);
input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, minor);
- set_bit(slotnum, &td->mt_io_flags);
+ set_bit(slotnum, td->active_slots);
} else {
- clear_bit(slotnum, &td->mt_io_flags);
+ clear_bit(slotnum, td->active_slots);
}
return 0;
@@ -1384,7 +1383,7 @@ static void mt_touch_report(struct hid_device *hid,
* defect.
*/
if (app->quirks & MT_QUIRK_STICKY_FINGERS) {
- if (td->mt_io_flags & MT_IO_SLOTS_MASK)
+ if (!bitmap_empty(td->active_slots, td->maxcontacts))
mod_timer(&td->release_timer,
jiffies + msecs_to_jiffies(100));
else
@@ -1443,6 +1442,15 @@ static int mt_touch_input_configured(struct hid_device *hdev,
if (td->is_pressurepad)
__set_bit(INPUT_PROP_PRESSUREPAD, input->propbit);
+ if (!td->active_slots) {
+ td->active_slots = devm_kcalloc(&td->hdev->dev,
+ BITS_TO_LONGS(td->maxcontacts),
+ sizeof(long),
+ GFP_KERNEL);
+ if (!td->active_slots)
+ return -ENOMEM;
+ }
+
app->pending_palm_slots = devm_kcalloc(&hi->input->dev,
BITS_TO_LONGS(td->maxcontacts),
sizeof(long),
@@ -2062,7 +2070,7 @@ static void mt_release_contacts(struct hid_device *hid)
for (i = 0; i < mt->num_slots; i++) {
input_mt_slot(input_dev, i);
input_mt_report_slot_inactive(input_dev);
- clear_bit(i, &td->mt_io_flags);
+ clear_bit(i, td->active_slots);
}
input_mt_sync_frame(input_dev);
input_sync(input_dev);
@@ -2085,7 +2093,7 @@ static void mt_expired_timeout(struct timer_list *t)
*/
if (test_and_set_bit_lock(MT_IO_FLAGS_RUNNING, &td->mt_io_flags))
return;
- if (td->mt_io_flags & MT_IO_SLOTS_MASK)
+ if (!bitmap_empty(td->active_slots, td->maxcontacts))
mt_release_contacts(hdev);
clear_bit_unlock(MT_IO_FLAGS_RUNNING, &td->mt_io_flags);
}
next reply other threads:[~2026-07-14 14:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-14 14:54 gregkh [this message]
2026-07-17 14:13 ` [PATCH 6.6.y 1/2] HID: add haptics page defines Sasha Levin
2026-07-17 14:13 ` [PATCH 6.6.y 2/2] HID: multitouch: fix out-of-bounds bit access on mt_io_flags Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026071417-praising-reconvene-e068@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=bentiss@kernel.org \
--cc=stable@vger.kernel.org \
--cc=trungnh@cystack.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.