All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: maskmemanish@gmail.com,jkosina@suse.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] HID: appleir: fix UAF on pending key_up_timer in remove()" failed to apply to 6.12-stable tree
Date: Tue, 14 Jul 2026 16:54:28 +0200	[thread overview]
Message-ID: <2026071428-footless-stunner-a722@gregkh> (raw)


The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x 75fe87e19d8aff81eb2c64d15d244ab8da4de945
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026071428-footless-stunner-a722@gregkh' --subject-prefix 'PATCH 6.12.y' 'HEAD^..'

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 75fe87e19d8aff81eb2c64d15d244ab8da4de945 Mon Sep 17 00:00:00 2001
From: Manish Khadka <maskmemanish@gmail.com>
Date: Fri, 15 May 2026 23:17:52 +0545
Subject: [PATCH] HID: appleir: fix UAF on pending key_up_timer in remove()

appleir_remove() runs hid_hw_stop() before timer_delete_sync().
hid_hw_stop() synchronously unregisters the HID input device via
hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(),
which drops the last reference and frees the underlying input_dev when
no userspace handle holds it open.

key_up_tick() reads appleir->input_dev and calls input_report_key() /
input_sync() on it.  The timer is armed from appleir_raw_event() with
a HZ/8 (~125 ms) timeout on every keydown and key-repeat report.  If a
key was pressed shortly before the device is disconnected, the timer
can fire after hid_hw_stop() has freed input_dev but before the
teardown drains it.

A simple reorder is not sufficient.  Putting the timer drain first
still leaves a window where a USB URB completion (raw_event) running
during hid_hw_stop() can call mod_timer() and re-arm the timer, which
then fires after hidinput_disconnect() has freed input_dev.  The same
URB-completion window also lets raw_event() reach key_up(), key_down()
and battery_flat() directly, all of which dereference
appleir->input_dev.

Introduce a 'removing' flag on struct appleir, gated by the existing
spinlock.  appleir_remove() sets the flag under the lock and then
shuts down the timer with timer_shutdown_sync(), which both drains any
in-flight callback and permanently disables further mod_timer() calls.
appleir_raw_event() and key_up_tick() bail out early if the flag is
set, so no path can arm or run the timer, or dereference
appleir->input_dev, after remove() has started tearing down.

The keyrepeat and flatbattery branches of appleir_raw_event()
previously called into the input layer without holding the spinlock;
take it now so the flag check is well-defined.  This incidentally
closes a pre-existing read-side race on appleir->current_key in the
keyrepeat branch.

This bug is structurally a sibling of commit 4db2af929279 ("HID:
appletb-kbd: fix UAF in inactivity-timer cleanup path") and has been
present since the driver was introduced.

Fixes: 9a4a5574ce42 ("HID: appleir: add support for Apple ir devices")
Cc: stable@vger.kernel.org
Signed-off-by: Manish Khadka <maskmemanish@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

diff --git a/drivers/hid/hid-appleir.c b/drivers/hid/hid-appleir.c
index 5e8ced7bc05a..adaa44a858ed 100644
--- a/drivers/hid/hid-appleir.c
+++ b/drivers/hid/hid-appleir.c
@@ -109,9 +109,10 @@ struct appleir {
 	struct hid_device *hid;
 	unsigned short keymap[ARRAY_SIZE(appleir_key_table)];
 	struct timer_list key_up_timer;	/* timer for key up */
-	spinlock_t lock;		/* protects .current_key */
+	spinlock_t lock;		/* protects .current_key, .removing */
 	int current_key;		/* the currently pressed key */
 	int prev_key_idx;		/* key index in a 2 packets message */
+	bool removing;			/* set during teardown; gates input_dev access */
 };
 
 static int get_key(int data)
@@ -172,7 +173,7 @@ static void key_up_tick(struct timer_list *t)
 	unsigned long flags;
 
 	spin_lock_irqsave(&appleir->lock, flags);
-	if (appleir->current_key) {
+	if (!appleir->removing && appleir->current_key) {
 		key_up(hid, appleir, appleir->current_key);
 		appleir->current_key = 0;
 	}
@@ -195,6 +196,10 @@ static int appleir_raw_event(struct hid_device *hid, struct hid_report *report,
 		int index;
 
 		spin_lock_irqsave(&appleir->lock, flags);
+		if (appleir->removing) {
+			spin_unlock_irqrestore(&appleir->lock, flags);
+			goto out;
+		}
 		/*
 		 * If we already have a key down, take it up before marking
 		 * this one down
@@ -229,17 +234,25 @@ static int appleir_raw_event(struct hid_device *hid, struct hid_report *report,
 	appleir->prev_key_idx = 0;
 
 	if (!memcmp(data, keyrepeat, sizeof(keyrepeat))) {
-		key_down(hid, appleir, appleir->current_key);
-		/*
-		 * Remote doesn't do key up, either pull them up, in the test
-		 * above, or here set a timer which pulls them up after 1/8 s
-		 */
-		mod_timer(&appleir->key_up_timer, jiffies + HZ / 8);
+		spin_lock_irqsave(&appleir->lock, flags);
+		if (!appleir->removing) {
+			key_down(hid, appleir, appleir->current_key);
+			/*
+			 * Remote doesn't do key up, either pull them up, in
+			 * the test above, or here set a timer which pulls them
+			 * up after 1/8 s
+			 */
+			mod_timer(&appleir->key_up_timer, jiffies + HZ / 8);
+		}
+		spin_unlock_irqrestore(&appleir->lock, flags);
 		goto out;
 	}
 
 	if (!memcmp(data, flatbattery, sizeof(flatbattery))) {
-		battery_flat(appleir);
+		spin_lock_irqsave(&appleir->lock, flags);
+		if (!appleir->removing)
+			battery_flat(appleir);
+		spin_unlock_irqrestore(&appleir->lock, flags);
 		/* Fall through */
 	}
 
@@ -318,8 +331,20 @@ static int appleir_probe(struct hid_device *hid, const struct hid_device_id *id)
 static void appleir_remove(struct hid_device *hid)
 {
 	struct appleir *appleir = hid_get_drvdata(hid);
+	unsigned long flags;
+
+	/*
+	 * Mark the driver as tearing down so that any concurrent raw_event
+	 * (e.g. from a USB URB completion that hid_hw_stop() has not yet
+	 * killed) and the key_up_timer softirq stop touching input_dev
+	 * before hid_hw_stop() frees it via hidinput_disconnect().
+	 */
+	spin_lock_irqsave(&appleir->lock, flags);
+	appleir->removing = true;
+	spin_unlock_irqrestore(&appleir->lock, flags);
+
+	timer_shutdown_sync(&appleir->key_up_timer);
 	hid_hw_stop(hid);
-	timer_delete_sync(&appleir->key_up_timer);
 }
 
 static const struct hid_device_id appleir_devices[] = {


             reply	other threads:[~2026-07-14 14:54 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-14 14:54 gregkh [this message]
2026-07-17 14:55 ` [PATCH 6.12.y 1/2] treewide: Switch/rename to timer_delete[_sync]() Sasha Levin
2026-07-17 14:55   ` [PATCH 6.12.y 2/2] HID: appleir: fix UAF on pending key_up_timer in remove() Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2026071428-footless-stunner-a722@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=jkosina@suse.com \
    --cc=maskmemanish@gmail.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.